Barely used

AirForce Airguns Bipod. $50 shipped f&f PayPal please.​

New, never used BSA auto indexing magazine. Part # PY-A-4989. Will ship in a USPS small flat rate box for $8.55 CONUS. Buyer pays shipping charges. Paypal FF/Venmo/Walmart2Walmart or PP G&S (+3.3%). Asking $45 + shipping.

Good Day AGN'ers
I had intended to repair this rifle but have been too busy resealing/refinishing several pumpers for a couple of weeks now. This rifle is a break-barrel and to remove the spring, a specialty jig is required, and I don't have one. So, I figured that someone else may have the time and actually want to shoot this rifle after repair. Since I had removed the stock and you would need to do the same, I left it off for shipping purposes as it doesn't look like a rifle box anymore.
It is in great shape, I thought that it was brand new in the box but found a minor flaw in the stock in a couple of spots, so not new. Bluing is near perfect without any rust that I can see.
Price is $80 (to me) shipped only in the CONUS. PayPal is preferred payment and standard is best as it provides at least some insurance (F&F if you prefer otherwise though).
I have a many good transactions with zero issues, deal with confidence. I try to check this site a few times daily, but do not monitor constantly, please be patient, I will take questions or "I'll take it" via the time stamp as they come in.
Thanks!
Mike

This is a "Spooky" 17 Caliber Carbon Fiber moderator. The internals are gyroid printed PETG.
This moderator performs best at muzzle energies between 15 and 40 foot pounds.

$45.00 to your door.

Specs:
Length: 100mm (~4 in)
Diameter: 24mm (~1 in)
Weight: 1.15 oz (33 grams)
1/2 x 20 UNF stainless helicoil




Audio was recorded of the bare rifle and the rifle with the moderator.
Here is that sound sample repeated three times.

The microphone is about ten feet further from the bullet trap than it is from the rifle muzzle. The sound of the pellet striking the trap is much louder than the rifle.

Analysis in "Audacity" shows that the net reduction is 11 decibels. That is a net reduction in detectable range of about 350%.

This chart explains that claim:

AirForce Ring-Loc Valve Pin Cap Kit for Condor,Condor SS, Escape, Talon P & Talon P Carbine. New in box . $45 shipped PayPal f&f please​

The video tells you all these are made by a member here, they are almost $200 brand new I am asking $110 shipped each or $190 shipped for the pair.

Venmo or zelle only, PayPal sucks and my feedback doesnt.

Reaching out to our Michigan members. Assorted .25 pellets. 17 tins, 5 tins of 150 ct, and 3 packs of FX hybrids.
I think the pictures will show what I have. I live in mid-Michigan and wanting to sell them locally. I have no desire to ship lead.
The .30 caliber have been sold.

Asking $150 for the lot. US postal money order or Paypal F&F

Thanks for looking, Scott

Hi AGN! I'm in need of Kral NP-03 barrel in .22 caliber. Let me know if you have one stashed somewhere that you don't really need, or if you know where I can source one. I have already checked with CSS, they only have .177 and .25 caliber barrels for NP-03. Thank you!

WTB: Taipan Veteran Shorty .25 caliber. You may e mail me direct at [email protected]

wysiwyg.....

everything pictures for $10 shipped conus.

complete .177 FX Impact caliber change kit. Got from another AGN member and made the decision that I will most likely never use it. Make me a reasonable offer and its yours. Your welcome to reach out for me directly at 847.715.6944 if you have any additional questions.

Looking for the above Scope. Let me know if you have one you’d like to sell?

Thanks

JoeWillie

Loading gate for the Huben K1 in .22 or .25 caliber. Gets rid of the crappy smash it down and force the pellet by it gate. The stock gate is a pain and often deforms pellets trying to get them in the magazine. I made a pellet gate that mounts in the stock location with the stock screws. Uses a pair of of magnets to keep the gate closed. You get easy open access to the magazine to load your pellets or slugs. This is 3d printed out of PETG, black is what I currently am making, but I can do colors, so if you looking for a certain color please ask.

$35.00 shipped to your door in the continental US via USPS First Class mail.

Please note, if you have a Walnut stock, all of them are not milled the same at/near the magazine area, you may need to sand a small area for the gate to clear. Please look through the attached series of photos and pay close attention to the synthetic stock photos and then the same area in the walnut stock to see what I am talking about. A lot of these photos are extreme closeups and make the gate look very blocky, they are not smooth, but a lot smoother in person than in the photos. If you really want to, you can sand it very smooth and paint it.

Barrel Length = 58.42cm (23 inch)

Cylinder Capacity = 480cc

Weight (Unscoped) = 8.4lbs

Caliber = .25

Loading = Bolt action

Magazine = 10shot

Option Added = Silencer

Air rifle in EXCELLENT CONDITION

Scope & mount pictured: not included

Will sell for: $985.00

Scope and mounts: Hawke eclipse 4x16-50: NO LONGER AVAILABLE

Owner’s manual included

Sightmark Wraith HD 2-16X28 Digital scope
With upgraded Accufire illuminator. Open last year, to check function but unused. New.
$325 split shipping.

I dont have any .177 rifles left. The Crosman CP are June 2009 and maybe 1/2-3/4 full. I will ship free for PPFF in a USPS flat rate box and pack the partial tins with tissue to keep safe and tightly pack the rest as well. What you see is what you get. Message me if you want them.

Impulse air 1200 with 5 baffles. Factory is 4. Fits up to .25 cal.



$150 shipped. PP FF.

Thanks, DT

Like the title says, I’ve got a Notos with bottle conversion (done by firewalker). Comes with two Maple ,7 round mags, one 10 round mag, single shot tray and 2 stock mags. Rifle loves anything 15.89 and under.

I grabbed this for bird abatement, but grabbed two leishy classics at the same time. Scope not included. Picture below was 30 yards and 7 rounds. $450 shipped and insured , PayPal F&F.

Weihrauch HW75 target pistol. Shot a few times but to rough on my tired hands. .177 caliber. As new in box with paperwork. $465 shipped in Continental U.S Only. Nice figure in the Walnut Target grips.

Option number two is; the pistol with the factory Target grip and “aluminum extension/Rosewood checkered grip panels, screws with o-rings Custom kit”. This gives both grip configurations. $525 shipped. See second picture.

Leupold PRW2 low 1” in excellent/like new condition…$40 TYD

SOLD!!!Vortex 1” 0.95” (high?) in good condition…$35 TYD SOLD!!!

Both are picatinny rail mounts…

PayPal preferred

I'm looking for an FX Crown .177 500mm barrel kit

Ty
Dave

I'm looking for an FX Crown .177 500mm barrel kit

Ty
Dave

Vector Veyron 4-16 FFP MIL Illuminated
Mounted once. Used maybe 20 rounds. Zeroed fast. Accurate. Holds zero.
$200 shipped.

Just like new. Bought in 2023.

More spring cleaning. I no longer need an external reg. $90.00
Excellent Joe Brancato external reg. Used for tether shooting with my Air Force rifles.

I ship to mainland USA with USPS tracking.
Accept PayPal.

This rifle has a custom hammer spring with a PEEK preload bushing and Huma regulated. The rifle has been completely resealed in the last 2 weeks. Listed below are chrony numbers and a 5 shot group at 40 yards.

• Original Leshiy
• 350mm LW 9mm/.357 barrel
• DonnyFL 1/2-20 moderator adapter kit
• RARE auxiliary air cylinder made by John Hagan
• Shroud extender
• Custom hammer spring and PEEK preload bushing
• Upgraded Wiki manometer / air cylinder gauge 300bar

No trades. I picked up Ctairgunnner’s Slayer and just offsetting cost. I’ll not let go of the Hagan aux tank until the rifle itself goes.

• $1500 shipped with John Hagan Aux Tank
• $1150 for Leshiy + 350mm 9mm barrel, DonnyFL 1/2-20 adapter