Selling my RAW 1000X LRT Left hand 25 cal rifle. I bought this gun in November 28, 2022. I had plans of doing a lot of long range shooting but it never materialized. Turns out most of my airgun shooting is done in the basement. This gun has been aired up and test fired, like new condition, it will be shipping in the original box I received it in. One magazine, the spare o rings and the manual is included. Ships free to the 48 States. Asking 1600.00

Hello AGN:

Since getting a compressor, I realize that I no longer need to be hoarding 5 different SCBA air tanks so I'm looking to move a couple of the extras. Both of these tanks are outside of their initial 15yr service life so you need to have your own fill source to use them. However, rest assured that these are structurally sound and fully functional as they are the two that I have been using to fill my rifles - you can see from the last photo below that the 30min tank currently has a full 4500psi charge and the 45min tank is at 3000psi after just topping off a couple of my rifles. Also please note that the OEM Scott valve itself will cost you $40-$45 so you're basically getting the tank itself for just a few dollars...

Up for sale here is:

• Scott Air-Pak (Luxfer) 30 minute 4,500psi SCBA tank w/ genuine Scott valve. Price is $50 w/ local pickup in the SF Bay Area. [SOLD]
• Scott Air-Pak (Luxfer) 45 minute 4,500psi SCBA tank w/ genuine Scott valve. Price is $65 w/ local pickup in the SF Bay Area. [SOLD]

If picked up locally, I will deliver them to you with a full 4500psi fill. If you would me to ship them to you, shipping will be at an extra cost and I will drain the tanks down to 1000-1500'ish psi for shipping. Shipping cost for one of these tanks will likely be around $35 depending on your location - contact me for a shipping quote if interested.

I've got plenty of positive feedback here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

combined to one ad.

I had these professionally machined and heat treated after bending and breaking a couple that are made and sold by other sources. Made from tool steel and machined to factory spec sizes of nut and stem. No more bent or broken tool.
One end is square and hollow to remove the nut. The other end is threaded for pulling the exhaust valve body on older Benjamins and Sheridan's. This tool is needed to access the valve on all the Benjamin airguns made in St. Louis, all the Benjamin, Benjamin/Sheridan, and Sheridan airguns made in Wisconsin. It is only needed on some made in New York during the 1st year that they were made in NY. If you are not sure if you need this tool, start to disassemble the gun and look in the back of the compression tube, If you see the square hole in the center of the nut, you need this tool. If you plan on or want to reseal these guns and do not have these tool, there is no other way to do it.
50.00 paypal F&F shipped
tim

I have a complete M2R Type 2 Bullpup in .22 for trade. This gun is non functional right now. It is complete minus the safety retention spring. I cannot get the valve to seat. It may need a new poppet. I really don’t want to mess with it. I’d like to trade it for a springer in .22. PM me and we can chat about all the details and I can get you pictures. It’s an awesome gun when it is functional. I just want it off my work bench. I have a ton of orings for it that I just purchased. Enough for at least 10 full rebuilds. The Oring Store has a crazy minimum.

on order be here in a week or so new tank 95$ shiped m 18 threads 1.5

Here's a nice, clean Hawke Vantage 2-7X Mildot with adjustable objective in like new condition, very faint ring marks. $85 shipped.

Hi up for sale my FX royale 400 synthetic stock , .22 caliber . 2 magazines . also pic rail for tripod or bipod installed and sling mounts installed ,I bought this airgun New shoots very well I am downsizing my collection ,
Paypal F&F or add 3% $875. shipped to your door

FX STX barrel kit for wildcat or maverick. .25 cal 500mm. Includes barrel, liner, and shroud. $175 plus $15 shipping.

Pm me if you have any for sale.

Selling my Hawke Sidewinder 30 SF 8-23x56 SF:20xHalf Mil. Excellent condition. Accept Paypal or Venmo. MA based but can ship.

Selling all my PCP equipment as I am relocating to UK in June.

The FX Impact M3 block looks great and includes internal valve with 720 Power Plenum. This M3 block is only compatible with M3’s and not older models.

$45 for FX Block with valve and plenum shipped.

PayPal FF preferred or buyer pays fees. Tracking will be provided. CONUS only.

Thanks for looking!

Rob

"Fine reticle with 1/8MOA dot" (see box pic below)

Excellent condition / used little, in original box, with screw-on dust caps, turret covers, and I will include the rings that are on the scope. These scopes are no longer manufactured.


$350 + Shipping

Still available

Good evening,

I am looking to purchase the backbone GoPro package or sideshow go pro package

Fantastic little shooter that my kids used to shoot and I don't have a use for anymore. Has upgraded sights. Just a single shot tray , but I may have a five shot clip somewhere to throw in. ( I find them awkward and never use them with the gun) I have not done the Pilkguns trigger modification and it could use it, but once you get used to the trigger It's easy to shoot well.

This is not the model with the Walther barrel to be clear. But at 10m shot side by side. I saw no accuracy difference between this and my 853 With Walther barrel.

$160 tyd

Shoots really well I've only owned it for a short time . This was a 2002 Crosman import I believe.
Comes with 7 rotary magazines and everything you see in the picture.
It's really a pretty hefty pistol very similar in weight to a powder burner of that size.Windage only rear sight that hits dead on at 20' with R10 pellets
Just not my cup of tea.Every few years I give CO2 a go and then go back to my spring or single stroke pneumatics.

post I made on it.

$200 tyd lower 48

PayPal prefered payment.

Used see pictures.
$55.00 to your door.

174mm x 43mm
252 CC, ~15 in^3
146 grams, 5.15 oz
22 caliber
1/2 x 20 UNF helicoil insert
Designed to run on rifles over 40 fpe. If you gun is lower powered this moderator has too much internal volume to perform as well as a smaller unit.
Tested to 70 fpe

This is a large (by my standards) resin printed moderator. Works best on rifles over 40 fpe.

Fx Trantula .22 with 8 shot clip and moderator $750 plus shipping
Email tstray 52 @ yahoo.com

Pm me if you one for sale.

stock

I am interested in the above. Let me know if you have one to sell.

Thanks
Jon

Comes with 0dB moderator, single shot loader, 13 round magazine and Rowan Engineering easy single shot loader. Immaculate condition with no scratches, no leaks and transferrable warranty from Airguns of Arizona. $1000. Accept Venmo. Buyer pays shipping. Located in MA.

Selling all my PCP equipment due to relocating to the UK this June.

Cleaning up and selling a few items. I have new unused .45 AIR BOLTS BY AIR VENTURI. I would like $55.00 shipped paypal F&F.

580cc carbon fiber bottle, 250bar. $175.00 plus shipping conus, PayPal.