Looking for a crown .25 pellet probe, used or new just cheap. FX brand.

5 full tins. $85.00 shipped CONUS.

Looking for a 700mm CZ .25 barrel, but please pm if you have any spare Taipan barrels you would like to sell.

Thank you.

Both tankblocks are compatible with most any 7/8 tubed gun that is threaded to accept Crosman/Benjamin Prod, Fortitude, Discovery, or Maximums fill adapters. I used the larger one on a QB78 with PCP tube from Mountain Air, which was a cut down Disco or Maximus tube...

1 Magnum Airpower tank block, the silver one. $40 shipped lower 48 Paypal F&F or buyer pays fees

1 Magnum Airpower tankblock. with 48ci tank (>780cc!!) and brass tank adapter w/burst disc. Foster fitting added in side of tank block. Perfect for someone using a high flowing valve and needing "all" of the air. Tank is dated '06, no physical damage outside nor inside. $55 shipped lower 48 Paypal F&F or buyer pays fees, OBO.

Sales Rules:

• I accept PayPal or Venmo - F&F only.
• CONUS shipping is included in the asking price.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

I am selling a bunch of .22 NSA slugs which I no longer have a use for. All boxes are new and sealed.

There are 3 lots for sale:
NSA .22 17.5 .2165 / 4 boxes Qty. 400/box - Price: $55 Shipped SOLD
NSA .22 20.2 .2165 / 3 boxes Qty. 375/box - Price: $45 Shipped SOLD
NSA .22 23.0 .217 / 6 boxes Qty. 250/box - Price: $75 Shipped SOLD

While available take all the slugs for $140 Shipped.

I’m looking to purchase an M3 block that someone might have left over from a power block upgrade. Could really use one (lifesaver type deal)…for a fair price of course.

nla

Huma First Stage Tuning regulator for FX Impact MKI and MKII. $100 shipped to the lower 48. Paypal preferred, F&F or buyer pays fees.

Sabre Tactical Impact M3 first reg delete. Never used. $20 shipped lower 48. Paypal preferred, F&F or buyer pays fees.


Would consider trading for:

700MM STX Superior Heavy .25 liner
Taipan Veteran Huma Regulator and extended plenum
Taipan Veteran FX Liner system adapter/thimble
Taipan Veteran .22 bolt, transfer port, and breech oring bushing/carrier

I need a fill probe that fits a BSA Scorpion.

Thanks

Ronin in the original tube, mounted but haven't shot. Couple very small imperfections on the finish I tried to capture in 3rd pic, came from factory that way.
$150 shipped to lower 48, Paypal F&F preferred or add 3%. Not interested in trades.

I have a .177 vixen tuned by the Man....the Legend.....Derek Wall. This Vixen is freak'n awesome. It can shoot JSB KO under an inch at 50 yards and JSB pellets hole in hole at 50 yards in no wind. Smooth side lever, comfortable to shoot on bench or standing, great trigger, and has the power if you are wanting more power. Asking $1,100 shipped CONUS. Will come with 8 mags and a fill probe. I will accept PO MO from well known AGN members. Scope and rings not included. The only trade I would consider is for a .22 Revere regulated.

JSB KO
Shots 1-10
Hi - 918
Lo - 911
Av - 914 Energy - 25 ft-lbs
ES - 7
SD - 2

JSB 16.2
Shots 1-10
Hi - 881
Lo - 875
Av - 877 Energy - 27.7 ft-lbs
ES - 6
SD - 1

JSB 13.43
Shots 1-10
Hi - 934
Lo - 931
Av - 932 Energy - 26 ft-lbs
ES - 3
SD - 0

Hello. I’m looking for a power block for my Impact. Let me know. Just the rear block with all essential parts for a swap.

Update! Selling for $180 shipped . I have a nearly new DonnyFL Emperor V3 Moderator for .357 w/ an Airforce Texan Adapter (.308). The moderator has no blemishes or scratches on it.

PM me if you're interested. -Dave

RAW HM1000x .22 cal Chassis rifle.
Was purchased new from Utah Airguns in March or April. Bought it to feed my airgun addiction. The rifle is awesome of course. Trigger is as phenominal as everyone says. Rifle is in perfect condition. There is a small burnish mark on hand guard (see photo). It is not down to bare metal. It’s more like a mark where something rubbed against it and buffed the matte finish to a slight shine. It was there when I received rifle from UA. It either happened at facory or at UA because I examined rifle as soon as I opened it’s foam case. Additional photos on request. Includes case and one magazine.
Scope and mounts are not included. Basically selling because I have two FX Crowns that pretty much cover my needs, and am kinda partial to traditional stocks.
$1350, I will put $50 towards shipping.
USPS Money Order or personal check.
I do not have a paypal or similar payment service account. I have sold many items on AGN and have an excellent rating. My listing for rifle is 100% accurate and truthful.

Picked this gun up from AOA in April. It’s been a lot of fun to play with but want a new toy. It’s extremely accurate with many different pellets/slugs

Looking to buy a Windicator flag advertised by AOA some time ago. Please contact me at 1 (805) 216-8774 or at [email protected]. Thanks.

As pictured, $325 shipped lower 48, OBO. paypal F&F





Marauder pistol assembled as a carbine in a QB stock. Stock fitment is stable, secure, but unfinished.

The powerplant/tune is basically a .22 version of the 1720T/Rapid 70 I sold a short time ago. The new owner of that gun could provide feedback regarding how the gun shoots. The two performed almost identically, just one in .177, the other in .22. There may be some characteristics that are appealing, while some may not be so appealing. The new owner would be able to provide objective feedback on what I consider as my ideal Prod/1720 tune.....your tastes may vary.

Gen 1 trigger with Airgun Lab shim
Rowan adjustable trigger
<14gr peek hammer
Peek poppet with 2mm stem
Huma reg using larger plenum
1/2-20 adapter with Tanto
Monstrum 1-4 x 20
2 magazines
Includes OEM pistol grip/trigger assembly
OEM forearm
OEM skeleton stock
OEM forearm bracket.
2 sears for the OEM pistol grip---stock sear for use on 7/8 tubes and raised sear for use on 1.25 Gen 1 Marauder tubes.


Tune easily adjusts from 3 mags of FTT 14.66gr around 740 to over 4 mags around 710fps by adjusting hammer spring. Reg is pretty low, IIRC around 110-115bar.

Very sweet shooter. This prod barrel is a bit loose, prefers larger head sizes. Does NOT like CHP's. I only feed it FTT 5.54's and it does 1.5-2" at 50 yards with these. I have no clue how it shoots other pellets, it took out so many pests with FTT's I had no reason to try anything else.

Don’t own any more 25cal airguns.

Asking $110 shipped PayPal F&F or you pay 3%.

Thanks for looking.

Recently bought to try out on my evol mini. It’s smaller than the shroud diameter on the mini, so looks funny. Good sound moderation.

Asking $100 shipped. PayPal F&F or you pay 3%

Thanks for looking.

Unfortunately need to sell my toy to finish paying for college.
Fx Impact M3 .22 cal 700mm
Slug kit with slug liner installed, pellet liner and probe included
Saber tactical bag rider and arca rail
800 rounds of new slugs (Patriot, Zan, JSB)
DonnyFL FX supressor
Angled gauge for better viewing
Magazine speed loader
1 high capacity magazine included
Scope & Mount not included
Pictures will be posted in the evening.
$2250 plus shipping depending on location.

I have for sale a 700mm .25 caliber barrel kit that was came with my Impact MKII power plenum.

It has a STX liner(not a superior liner)that has never had a round through it, as I used a slug liner.

New FX 28 round side shot magazine.

.25 caliber probe

As you can see in the pictures There are a few marks on the barrel from normal use.

$200.00 You pay shipped

PayPal Only

CONUS ONLY

I got this 22 air gun in a gun deal I made. I am left handed or I would keep it. But I can not find any grips and I have a few Benjamin's already. So I am selling it. I look at sold on ebay and they seem to go for around 2 to 300. I know the guys here and all shooters and collectors so I figured I would advertise it here. Its like new in the box. Paper work, box and gun. I shot three pellets through it with two pumps each round. All I did was oil the wool washer plug in the pump. I am sure over the years this could use a cleaning and proper oiling. It seems to hold air OK. I bought a grouping of guns from a friend who's husband passed and this was part of the grouping. If anyone is interested I am at 200 or best offer. I am sure shipping to cont. USA would be around 20 dollars give or take. If you want to discuss it my email is [email protected] Price drop 150.00 USD This item has sold.

I have a Wildcat MK3 Compact and would like a Huggett FX Wildcat Dedicated Shroud 22/25

Daystate Red Wolf Stock- red laminate excellent condition!

-off a new to me Red Wolf. I was lucky to find a chassis so.

-almost perfect except 2 small rubber scuffs on butt pad

-275$ shipped to your home (lower 48)

Selling my barely shot Weihrauch HW 98 in .22 cal.

I bought this gun new from Krale a couple months ago and have put *maybe* 30 pellets through it. I’ve never owned a more accurate and pleasurable springer. It’s so accurate it almost takes the fun out of plinking… almost. I’m only selling it because my collection has gotten out of hand, and the newest guns need to go first.

**MAJOR DISCLAIMER—PLEASE READ: this gun was advertised on Krale as having the traditional HW 98 stock with the black stippling. It was a gorgeous design that clinched the deal for me over all the other amazing offerings from Weihrauch. However, when it arrived, it had instead the new stock, without the black paint. I was very disappointed, and in a fit of rage and inspiration I painted it myself to match the original design. Now I’m sure some of you are screaming: “You fool!!! What have you done?!?!” But in my defense, it came out looking really good (see pictures) and, after having spoken to a few people who have ordered the same gun recently from various retailers, they are ALL advertising the original stock and then sending the newer, less attractive stock. So it might be hard to find the black stippled versions otherwise. Either way, it goes without saying that the gun shoots just the same—which is to say excellently.

$500 plus shipping in CONUS. Zelle preferred. The only trade I’m interested in is a .22 or .25 Sumatra carbine.

Comes with original box and manual. ***Scope and mount not included.

Thanks.