WTT:
I have a 5.5mm Taipan Veteran Standard version that i would like like to trade for a 4.5mm Veteran.

Must be the standard version in 4.5mm

We can only trade the rifle part if you are keen on it, i will keep my black stock as i do understand it is not as nice as a Laminated stock.

Please let me know if intressted

5.5mm Taipan incl the following:

3D Printed cheek Piece
3D Printed magholder
2 Magazines
Huma Digital Gauge
Donny FL Silincer Adaptor to 1/2UNF
Or for Sale @ $850 Gun only
$1250 Incl gun $ Vortex Scope 5-25x56FFP
Buyer Pays Shipping

Hello AGN:

I'm looking for an Edgun Leshiy 2 350mm barrel in either 0.25 or 0.30 caliber (or maybe even 0.22). If going the 0.22 or 0.25 route, I'd love to get a couple of magazines to go with the barrel as well.

If you have any of the above, please let me know what your asking price is with delivery to San Jose, CA 95138. I'm not a noob at this and will only buy from members I know or feel comfortable with or can verify in one way or another.

Thanks in advance!

This is a HW95 .22 new in box , never been shot .

I pay $354 for it as part of a lot , with other airguns .

It has a little crack at the grip , see photos .

My Luther (guitar maker) fix the crack with wood glue , a pass tru screw and a little guitar inlay to cover it . I cocked it several times , without shooting , and work flawlessly .

Price = $354

Method = PayPal

I will pay half shipping .

Thanks for your interest !

Jesfranco

Nla.

.

This is a RAW HM1000X Chassis with a collapsible Magpul buttstock. You will need an AR15 buffer tube to attach the stock to the chassis. $200 delivered in the continental USA

Pretty much mint condition. Great scope as they usually are, just not enough for my aging eyes.

Comes with the picatinny mounts and the UTG one piece dovetail mount.

NOTOS in picture NOT included.

$75 shipped CONUS
PayPal preferred

Thanks

Perfect condition, 1/2 x 20 thread, has extra wrap inside. $120 shipped and insured in the con US

UTG Over Bore Bipod $100 shipped Sold

Sabre tactical 60mm bottle clamp $50 shipped

Both in good condition.

Offers, trades considered? I am looking for: .25 STX Superior Heavy Liner 700mm; FX liner system outer barrel tube(s) in any length; Taipan Veteran Huma reg; Taipan Veteran extended plenum;

Payment via payal f&f or buyer pay fees

I have a vector veyron in 4-16x44 mil reticle I’m looking to trade for an immersive prismatic. Don’t think I need 10x, but I’m open to offers.

Let me know what you have.

Thanks for looking.

I will be getting a brand spankin new 500mm .22 cal barrel. Would like to trade for a 600mm .22 cal barrel. Let me know.

This pistol is a ton of fun. It shoots bb's, pellets, corks, plastic bb's and... Darts! At five steps it's fairly accurate but beyond that, not so much.
This is an excellent representation of the type.
I do not possess the box or any of the other accessories. The gun itself is very clean and just makes you giggle when you shoot it. $40 bucks firm, and I'm asking that you pay for freight.
PP please....

This resin printed moderator is 31.8mm (1.25") x 90.4mm (3.62") and 1.98 ounces (54.4 gm). Just right and just in time for squirrel season. I've tested it on my Dragonfly and was shooting consistently under a penny at 40 yards with no wind.

1/2 UNF threads printed (no steel insert)
22 caliber
$40.00 to your door.

This moderator contains 3 baffles. It can not be disassembled. Cleaning is accomplished by soaking in warm soapy water, threaded end up over night. Generally this is done by my testers every few thousand rounds. Particularly egregious fouling could be removed with any household cleaner as the plastic is not sensitive to reasonable use of acetone and/or denatured alcohol.

CONUS only.

I will ship outside of CONUS but we will have to work out that price.

PayPal only. I will send you an invoice after I have your email address.

Money back upon return if you are not pleased for any reason.
Contact me for return postage if necessary.

up for sale is my Japanese Barra scope collection, amazing glass but they don’t really fit my use/need of long range and field target use to my liking. Some of the best glass I’ve ever seen, super bright and white Japanese glass with biggest eye box ever for low light conditions. They are a bit heavier than the average Chinese scopes but the glass is so much better. They are quite rare find these days, they never made or sold many of them. All scopes are in very good condition in original box with no ring marks or scratches I can see. All the scopes have Mil adjustment or NOT MOA turrets.

FT1.5-8X32 LPVO style with duplex reticle, no/fixed parallax adjustment …….$230

FT2-10X44SF, BCD reticle, parallax adjustment down to 10 yards…….$250 SOLD!

FT3-15X50SF, Mildot reticle parallax down to 10 yards……..$280 SOLD!

FT5-25X50SF, Mildot reticle parallax down to 10 yards……..$280 SOLD!

All prices include shipping and none of them have illumination

Looking for a pellet holder to fit my leishy classic in 25 cal
thanks

Here is a new Huntsman Regulator I tried to install in my Revere. Could not get it to seal as it would leak past the reg and out the airtube threads. Someone else can try it in theirs. Has the larger plenum. Set at 135 bar. My Revere runs fine unregged $80 shipped. New lower price. #1143 fits Hatsan Flash, Flashpup, BT65, Gladius, and Galatian Series after 2018.

alumnion ldc 1/2 20 threads with baffles 22 cal will work on 25 cal also 1.125 o/d 7 inchs long very lite weight

Purchased used off Armslist in 2019. Sent to Martin Rutterford to have stock refinished, gun resealed and added a gauge block ( when this gun was built there was no gauge). Excellent Field Target gun shooting JSB 10.3s at 890 fps. Gun is very clean with no marks on the stock or shroud. Scope and rings not included. $1600.00 plus shipping. PayPal F&F, 3.5%, postal money order, will even take a personal check from a member in good standing, but won’t ship till check clears. pm me thanks Rick

These are custom-made , flat nose slugs in .22 and .25 (also hollow points available)

They come in a 200 slugs package or , as many as you like .

Caliber .22 = .217” diameter

Calber .25 = .250 diameter

Please ask for your specific weight and I will try to make it for you .

Price per 200 slugs = $16

Shipping = $10.20 (200 up to 1200 slugs USPA Priority flat rate small box , depending of the slugs grains)

Thanks for your interest !

Up for sale my Weihrauch HW-100T FSB.
This is one of the original HW100T's with a fully shrouded barrel.
Mint, like new with only one magazine of pellets fired for initial testing. Multiple pellets through one hole at 25 yards.

Regarding accuracy, the 0.22 shrouded, 12 groove, barrels are without issue (which is my experience my rifle) . The problem 0.22 HW100s have 6 groove barrels.

Purchased as a backup to my FX 400 Royale .22 cal. Never needed it: The Royale never let me down for pest control.

I have a Hawk Nite Eye scope currently mounted. It works perfectly and is a great match for this rifle. Lens covers included.
Here's a review of the scope:


If you are not interested in the scope, I will separate the scope from the rifle and accessories if needed.
Asking $600 for the rifle shipped/insured obro.
Asking $200 for the scope, shipped/insured obro.

Shown in the pics (apologies for the out-of-focus pics..will redo them upon request) is a good-quality silencer purchased at the time of the rifle (0DB silencers were not around back then). Never installed.

Everything in the pics is included (except the hard shell case-sold), including a second, higher-capacity air cylinder (purchased from AOA), a fill port adapter, an owner's manual, and other extras.
I purchased this new from AOA (Shawn) and the pics on the stand were sent to me by Shawn, showing the nice grain pattern. I had my choice of 3 at the time. This one had the nicest grain.

I will ship in a generic fabric rifle case well packed in a shipping box, fully insured at my cost.

Asking $800. OBRO.

I will be happy to answer any questions via PM.

$1.200.00 plus shipping for everything you see.

Purchased from Utah Airguns in May of 2023, so still under warranty. Comes in the original box and all the pieces it came with. Included is the STUD loader, 2 FX 22 rd mags, 2 Orion 21 round mags, and a 177 and 25 single shot loader. I replaced the factory reg gauge with a Wika, but I include the factory one also. Also included are breach o-rings, x-rings for the gauges, and a complete o right for the whole gun ( it is missing the ones for the barrel inlet/transfer port pieces, i used both after I polished it.) Not pictured, but it will come with a new FX barrel inlet 8.8 on schematic (transfer port.) The current inlet piece has cosmetic marks from removal when I polished it. It operates fine, I just wanted to include it for the buyer. There is a small scratch on the barrel housing, the photo is included. Light wear where a tripod was installed before I decided a bag was better for bench shooting. I don't need the power of a dual reg gun for what I do, and I want a traditional rifle not a bullpup.
I have shot a 197 in the 30 yard challenge with this rifle and Crosman 10.5's










Reg is currently set for less velocity right now. It set to shoot 10.5gr around 12FPE.

Send me pictures of what you have and your asking price. Thank.

For sale benjamin bulldog .357 ive shot it about a dozen times over the 2 years of owning it, nothing wrong with it, includes magazine. 500 shipped paypal, located in clarence center ny.

View attachment 20230818_164413.heic

View attachment 20230818_164501.heic

View attachment 20230818_164420.heic

For sale,new. I need a wider bipod,didn’t want to spend $400 but looks like I’m going to. Model is UTGpro TBNR.

never fired brand new. Call Jay 360 241 5293 Or you can pm me. Calls preferred. N O T E X T S!!