Prefer TR Robb but not sure if he makes a .30 caliber. Will consider others.

dont know much about it got it in on a rifle deal i have no need for it willing to sell for 200$ shiped obo

SOLD

Arken SH-4 Gen 2 4-16x50 Mil, Vpr with added throw lever.
Comes in original box with sunshade.
Briefly mounted but my eyes need at least 24X now.
Very good shape.
I prefer PP, Venmo, cashapp or zelle If paaypal or Venmo please add 4%

Asking $200 shipped to lower 48 with insurance.
Ships same or next day.
Good seller rating.

SPF

I've had this since spring and it's happy with FX 25.4 .22 pellets.
Very good shape. Tried to take a pic of the small marks on the pic rail from mounting a bipod.
Have not tried slugs even thought it's the HP version and has un-choked 550mm CZ barrel.
nla

.257 LSS $999.99 + Shipping. Only to lower 48 states no trades PayPal only….
Original Packaging sorry no case.

1. SS Stock. $399.99
Paypal only 48 states no trades

.22 RED WOLF HP For Sale !
This is one of my most accurate rifles out of the box.
I have shot 1 inch dingers at 165 yards no problem. Have had groups out to 200 yards...
Shoots 22 FX slugs as accurate as can be...

Selling for $1999.99 paypal only. No Trades I need to reduce my rifle collection.

.257 & .308 Texan SS $999.99 Each + Shipping. Only to lower 48 states
No Trades and PayPal Only…

I'm looking for a almost new hw 35e in 177. Message me
Thank you

d

I have an STX 22 700mm slug liner I'd like to trade for:
* 500mm 22 pellet liner.
or
*500mm 25 pellet liner

Feinwerkbau 300s .177 with Tyrolean stock.
Very nice rifle.
Used for 25 yard benchrest.
Clean, straight shooting barrel.
The rest block is held in place by a UIT rail in the stock.
The block, scope & mounting are not included in the price but available if interested.
Front sight included!

$850 shipped conus.
This is lowest price I'm willing to go.
PayPal FF or add 4% please.

*

Umarex Gauntlet .25 -- $540 Paypal F&F, Zelle etc.

Added photo, 35 yards, old man and just a bipod. About 1.5 inches, which for my shaky hands is pretty good.

Hajimoto super tune kit
Wiboten Tactical 4-16x50 scope
1/2-20 Adapter
Terminador G-Tac Tactical Stock and original Stock
0.7L Bottle with 2200psi regulator and G1/2 to M18 Adapter
Terminador Extra Wide and Hajimoto Barrel Band
Bipod
LED Flashlight with remote switch
Small Red Laser
2 Hajimoto 15 round and 3 Umarex 8 round magazines

Note: While the Wiboten is a low cost scope, mount is built in and the laser & flashlight mount directly on built in picatinny rails (3). Only the flashlight needs rings.

-- Matt

This P-rod shoots lights out. Also includes (4) magazines.

It is tuned down to 612 fps avg for 32 shots per fill with JSB 15.89’s for barn pesting. Has the Hill Matched Pistol Parts Kit installed ($135 value), stock hammer with the Hill Peek delrin striker. Shot string below is from 3000psi to 2000psi and then starts dropping off due to the light tune and heavier Hill valve spring, which also prevents hammer bounce for better air efficiency. Still has three turns left on the hammer spring for more power. Consistently getting four mags per fill with a 19fps spread with this tune. Kills squirrels, no problem with good shot placement, which is very easy to do with this little tack driver. I also have the Crosman skeleton stock.

New Prices:
Gun $369
(3) extra magazines, $45 (4) total
Hill Matched Pistol Parts Kit $135
Peek striker $23
UTG pic/sling stud rail. $15
Bushnell Trophy Red Dot $100
DonnyFL M14 X 1.25 adapter custom threaded by my gunsmith ($75 labor) to accommodate the affixed AGT small moderator. ($100) .290 exit bore diameter.
*Original shroud end cap and short 1/2X20 adapter will be included.
*Over $900 invested, plus shipping!

The barrel band has been tapped with 10/32 machine threads and a machine threaded sling stud installed through the existing fore-end mounting hole and into the barrel band for more support. No extra holes drilled in the fore end. The front pic adapter is supported by the sling stud, not the plastic for-end.

Holds air indefinitely and is a tack driver with the JSB 15.89 pellets. Target pictures below are two, full magazine (8 shot) groups with current tune described above and in the chrony pic below. Very consistent accuracy and fps for a non-regulated pistol. Groups were shot at 50yds using 4-16x44 glass. Shoots CPD 14.3’s excellent also.

$450 for gun with affixed moderator and red dot. Due to new classifieds rules, moderator must be purchased as part of this package, as I would not be able to sell it separately. This thing is literally mouse fart quiet with the mod.

$400 minus the red dot/rings.

*Original box & papers from Crosman.*
*Crosman test card dated 2/14/23.
*Original valve cap, valve spring, hammer spring, steel striker and gauge block are included if you wanted to put it back to stock, although I don’t know why anyone would.
*Hill light hammer ($48.98) also included should you in the future choose a regulated application.
*Short 1/2x20 adapter and factory shroud end cap are also included.

I’m taking a huge hit on this so prices are firm and include free shipping to the lower 48.

If you choose to take the red dot, it will be sighted in at 20yds, and ready to shoot out of the box. I’ll even throw in what I have left of the JSB 15.89’s (2/3 500ct tin)

***See Bushnell trophy red dot sight specs in the pictures below. Will not sell the red dot sight before the gun sells.***

If you want it tuned higher, I can do that before I ship it. But realize that the shot count will be less. I will provide a full-fill shot string & target groups, using the red dot at 20yds to the buyer if he/she chooses a higher powered tune.

PP FF, Cashier’s check from bank or
USPS MO

Thanks for looking and bearing with my rambling! I feel the buyer is entitled to as much information as to make an informed purchase.

Check my feedback. Buy with confidence!


^Two shots did not read.^



^Breeze picked up for the last three on the top group.


^Minus the one flier. That one was on me^

For sale is a lightly used NOE 250-41-FN-BK2 2 Cavity BT, that's the two cavity mold in aluminum, no hollow point.
I've been casting in tin metal so it really hasn't seen much heat either.
I'm selling because although it casts nice shiny and round slugs, my gun just doesn't seem to like them! Maybe yours will.
NOE has them listed for $91, I'm asking $80.
Thanks for reading.

Hey All,

Need some guidance…..I am looking for a .30 bench rest gun for a newbie.

I am leaning towards a MK2 Impact (decent cost of entry, accurate, can be accessorized etc.). I am a bit worried that the tunability maybe a bit much but on the fence of what else would be a good option.

Figured I would throw this out and see what maybe floating around for options….

Was thinking a .30 RAW or Crown perhaps an older smooth twist .30 Bobcat or Boss .30 Cricket Tactical etc.

Anyways let me know what you may have that would fit the bill….

.30 only
Not looking to shoot slugs etc.
Not looking to break the bank on this one


Anyways let me know what you have that may fit the bill!

Thank You!

Looking to sell, as I have no use for it. I bought it as a 450mm barrel to use on my old Leshly Classic to shoot slug. Well the choke was too tight for slugs, so I had 3mm cut off, recrowned and had the breech end slightly tapered. I then encountered the problem of the barrel not fitting the leshiy classic with the extension and end cap as it was 3mm too short..

The slugs used to be stuck at the end and when forced through they were measuring .1755, since cutting and recrowning the slugs do not get stuck and come out measuring .1775-.178.

It is essentially a blank since Leshiy Classic get fed air directly into the barrel.

Sale price: $175 shipped
Retail price : $416 shipped from airgunheaven

Hello AGN:

I have a few Brand New in Box SWFA scope accessories that I'm looking to sell:

• 3x 2x SS-TAC SSOML 30mm Scope Bubble Level (w/ 1" Inserts): $35/each delivered
• 3x 1x SS-TAC SS30M Picatinny Style Medium (1.05") Height 30mm Scope Rings (w/ 1" Inserts): $33/each delivered

I've got plenty of positive feedback here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

Anyone interested in trading a pcp for my extra Minelab Manticore? Only used once for a couple hrs. I have the original box and all accessories.

Why spend $750 plus taxes on an inferior plain ole HW90 when you can buy my last custom stocked RX2 that is up for sale?!
This is best of them all imho. Action and stock are used but babied near mint for not being a safe Queen but crazy accurate shooter.
It is a Beeman RX2 in ideal .20 with one of a kind feathered custom stock. Action has one lil spot of pitting. The stock has no scapes, dings or such. Includes Beeman rear sight plate and ideal 1-pc SportsMatch elevation 11mm mount with 1 inch rings. Not pellet picky for what little variety of .20 ammo this still is. I will include I few sealed .20 tins to get you started as well. The stock and action will be separated for shipping as too many stocks get cracked in transport. *Note* Beeman RX and RX2’s have Theoben HE gas rams that can be rebuilt where as HW90’s do not and cannot be rebuilt but only replaced. $1000.00 plus shipping and insurance.(*I use Pirateship so costs will be minimalized*) Will be double boxed and full packed for minimal to no shifting. I have decades of 100% feedback here, AGW, old YF and GB so buy with confidenc. PayPal FnF or buyer adds 3.5% service fee ergo I net $1K.
Consider trades for R5M, Huben 22 or 25 and 42+ NF BR NP-R2 IR or Siii Hector IR OR a Element/Arken/Athlon 24+ IR scope plus cash, RAW .20-.357 CF barrel, probe and mags plus cash.
msg me for more detailed pics in info.
**scope in pics is sold and not part of this deal but the mount and bubble level is**
Thank you,
Keahi

***NLA***Aluminum Huben pistol 1913 picatinny butt stock adapter, I had on a Version I. A friend of mine made this before anyone had a all aluminum one available. Replaces factory block Works great, but I now have a combination adapter Sight/Butt stock installed.

$30.00 SHIPPED

STUD Magazine loading solutions, NEW (bought and never used) fits .22 FX Crown, Dreamline, WC MK 3.
$70.00 SHIPPED

***NLA***Made this Pistol/carbine adapter with UTG AR 15 adjustable butt stock, Will fit picatinny rail pistols or dovetail with adapter included, as shown on my Crosman/Benjamin Works great on other pistols also with Red Dot or scope mounted on top rail. Mount is high enough to clear magazine if your mounting in front of loading port. If your pistol is magazine equipped. Includes butt stock in picture.
(PISTOL NOT FOR SALE)

$45.00 SHIPPED

Magazines RAW .22 mag
Raw 22 Mag 1 for $25.00 Inserts on rt side 12 rd