Have a MTM predator shooting rest I never use. $5 PLUS shipping. If you give me an address, I'll give you a Total cost quote. If interested, Paypal F&F, Thanks.

Complete Oring kit (including dowty seals) for the DayState RedWolf. All required seals for the Standard or HP version. All four calibers are covered too (.177,.22,.25,.30)
$20 postage paid. 2 kits for $35 in the same mailer.

I have a like new HW44 pistol with the 2x20 Weihrauch scope. Purchased at AOA a while ago and it has just been sitting in my safe. I really don't have a use for it with 2 bullpup pcp rifles. It has 2 magazines. It has no signs of use. I did obtain a leak in one of the gaskets from just sitting, so I paid to have AOA replace all new seals in the gun. .22 caliber. $750

Unused, excellent condition, Anshutz Benke field target jacket..... Euro size 60 (USA size 48)

Arm pit to armpit is 23/24" across (46/48" full circle) Waist is 22" across cinched (44" full circle) .... 26" at the hips .... 33"tall on the back side. Inside dimensions are of course a little tighter due to thickness of material.

It was a good fit for me at a 42" waist. But I lost some weight, down to 38" so now it's a little to big. Just not snug tight anymore when cinched around my core.

Ideal fit for someone with a Large to XL frame, 42"-46" waist but there is more adjustment room for waist and hips if needed

$200 shipped ground to CONUS

Looking for. Magazine from any of the rifles above in 25 cal. Let me know what you have.

Thanks,

Andy.

Looking for a Bushnell 4200 Elite to put on a Rapid. Thx.

I have a fully customized Air Venturi Avenger bullpup in 25 caliber for sale. It was purchased from Pyramid Air on April 2, 2023. I've added custom Hydrographics and accessories and had planned to squirrel hunt with it in may. Unfortunately I'm needing to sell a few of my rifles for personal reasons. My loss, your gain. The only shots from this rifle were to sight it in. Laser accuracy at 50yd. Possibly further but my backyard only permits 50yd sight in. Being sold exactly as pictured. Centerpoint 4-16x44mm illuminated w/TAG reticle and Donnyfl shroud extension w/thread protector are included. 2 magazines and owners manual included w/ factory box. Feel free to contact me through private message or text (870) 450-8479. PayPal payment only. I will send a formal sales invoice with tracking information documentation assigned to the transaction. Thanks, Brett. Asking $650 delivered conus, possible negotiation or trade but prefer to sell outright. I might mention that I do all my own customization with custom Hydrographics. If interested in having your own rifle customized feel free to reach out.

I have a like new 308-115 mold up for sale. No longer have the 308 so no longer need it. Asking 75 shipped TYD. Also have a 510-401gr NOE mold that is like new asking 75 shipped. Any questions or want more pictures please let me know. Thanks for looking

Looking for a double bottle Panthera in .22 cal 700mm. No scope or bipod in trade. FX Impact M3 .22 cal slugger. Tensioned barrel. 1 high-cap 28 round mag. Power block and tungsten hammer installed (although I have not verified whether the tungsten hammer was installed).

I have a new, unused 500cc Tuxing 300 bar bottle I would like to trade for a 300, 350 or 360 CF bottle. Can trade with or without m3 valve. Thanks. CALL OR TEXT.
Bill and Addi. I'm Bill. 503-504-708four.

I’m looking to buy a box of Eley Ventus and Tenex in .177, 4.50

This is a build I've put together in the last couple months with great success. With the 700mm CZ barrel, two TT power plenums, the HUMA reg set approximately around 130 bar, and a nylon washer behind the factory hammer spring it is generating max about 55 fpe with 22 and 24.8 grain slugs. Other upgrades include...
1) factory 8 magazine holder and two 3D printed 2 mag holders
2) digital Sekhmet pressure gauge w/ a printed owners manual
3) a custom carbon fiber barrel shroud/tensioner
4) a HUMA regulator(currently set around 130 bar)
5) DonnyFL KOI moderator
6) DonnyFL speed dialer(does have some rash but perfectly functional)

All aspects of this gun and its components are 100% functional...zero leaks or issues. That said it does have some beauty marks here and there but nothing major...10/10 functionally and 8+/10 cosmetically. It has the typical Taipan reliability, dependability, and consistency from day to day. These things are built like a tank. Don't forget the amazing trigger on these guns! Even with a 700mm barrel and a 7" moderator it is under 40" long!
Included are also...
1) fill probe
2) a single shot tray
3) 12 mags total(2 factory, 4 resin, 6 3d printed; all work great)
4) 3d printed cheek pieces
5) extra o-rings, a bipod
6) two factory regulators with extra plenum spacers
7) a modified machine screw for adjusting the HUMA reg without disassembling the gun
8) a pan head screw for degassing by depressing the valve via the HST speed dialer
9) an extra nylon washer for the HST speed dialer
10) a picatinny rail mounted level
11) a picatinny accessory rail mounted to the stock
12) Also included is the original Long CZ barrel(550mm) that shot Hades pellets lights out before I removed it. It has a 1/2x20 unf moderator adaptor with the factory Taipan shroud
13) a printed Taipan instruction manual
14) the original pressure gauge
15) an AC500 chronograph
16) 300 FX Hybrid slugs

I've loved this gun as it's very reliable and consistent and a tack driver but I just don't have the time to justify it sitting on the shelf. Currently, at 130 bar reg and current HST setting it's pushing 22 grain FX Hybrids to around 980 fps=50 fpe with great accuracy...under half inch groups at 50 meters all day. It uses right around 2-3 bar/shot at this setting. That's around 50 shots per fill. Earlier I was shooting 24.8 grain NSA slugs to 950 fps(49 fpe) with great success. None of the slugs I've tried so far have been terribly inaccurate and two have produced sub-MOA; FX Hybrid's and 24.8 NSA's in .2165" and .216". Absolute killing machine...shot a pigeon at 118 meters the other day. Oh, also included are the slugs pictured...The full value of all this is well over $2000 but I just want to get a return for most of my investment...asking $1550 TYD in CONUS for the complete package listed here, no trades, Zelle or PayPal only, local pickup in south-central PA for $1500...message me if you want more photos or info...SCOPE NOT INCLUDEDED

If anybody has one for sale in Minnesota, have cash in person and other stuff to trade please let me know. 25 caliber would be ideal, but open to any.

Need a probe and mag for a 25cal dreamline

Let me know what you have.

Thanks,

Andy.

It's the Gen1 RainStorm and the Magazine looks like this.

I have a new huma slug pin probe, and dual transfer port for sale $35 shipped conus, PayPal friends and family.

Thank you,

James

949-363-3011

Just looking for a good deal. Needs to fit the 2022 RAW.

Regards

Three like new .22 caliber magazines for FX Crown, Maverick, and Wildcat MK3. $100.00 which includes insured priority mail shipping. PayPal F&F. U.S. sales, only.

Three like new .177 caliber magazines for FX Crown, Maverick, and Wildcat MK3. $100.00 which includes insured priority mail shipping. PayPal F&F.U.S. sales, only.

This is a airforce Condor 25cal 24 inch barrel has multiple mods as a new heavy hammer breach also breach knob maddog stock talent, tunes, suppressor talent, an gauge rmpa trigger 800tyd may consider trade depending on what you have also, the gun as never been fired brand new

Airforce Texan .510 carbine. Maybe 40 rounds have been down the barrel. Perfect shape will come with everything in the box. Including a nice Vortex scope as well. Located in Iowa. Will consider long range hunting PCP rifles as well.

As-new Artemis PP700 S-A .22 PCP air pistol for sale. Has had maybe 60 shots through it. $200 plus $25 shipping. SPF! SPF!

I’ve got 8 sealed tins of H&N Baracuda .22 pellets. $120 TYD in the US.

Bought from Crosman - Thanks.

Would anybody happen to have an extra laying around? Please.

I know I can get one through Crosman, but I'm impatient.

Crosman part #130-036

Hello,

I have some originals Airgun Technology magazines to sell : 6 in .177 and 8 in .22 for Vulvan 2-3, Uragan 1-2 and Vixen.

Price of 20 euros each without shipping. I offer the box for 5 magazines purchased.

Regards from France,