I can make to order

Solid walnut WORKSTATION except for the threaded bolt which is 1.25", straight grained maple.

Features:

• 213.5"x8" x 8.5"
• 15 pounds
• Walnut is kiln drilled, 2" to 2" thick.
• Thick leather protects the firearm at all contact points
• Threaded wood bolt is made by yours truly and is bi-directionally adjustable
• Grip support is also adjustable horizontally
• Finish is 3 coats of Danish Oil
• Joinery is wood glue and 14 dowels

$200 TYD.

That's a Huben K1 in the workstation. It is designed for powder burner rifles, but it works just fine for air rifles.

I've made about 40 of these in the past year. (oak, cherry, and walnut). It takes me about a week to make these.

As far as I can tell these have been discontinued. 39.00 shipped CONUS

I'm getting a war warp. Wondering if there's anyone with parts for sale. Not sure what I need yet. Spare magazine. .30 conversion kit. Etc

This is a Benjamin Marauder pistol in a Crosman 2009 challenger stock fitted with a aftermarket LDC.

Shooting about 12fpe for 30 shots per fill or 3 full mags from a 2850psi fill and it's loves predator GTO lead free pellets. I put this together as a trainer rifle to use with my nephews and it worked phenomenally with the LOP being able to be adjusted down for youth and the easy to use bolt that they are familiar with. It also has the gen1 mrod adjustable trigger and spacer along with an upgraded RAW trigger blade which sets back a bit further from the factory trigger again aiding youth or small frame shooters.

The stock of course can easily be set for an adult as well and makes for a great barn pest, general use carbine.(36.5in Oak, 30in with the LDC off.)
Asking $400 shipped with 2 mags, or $475 with Hawke 4-12x40 Panorama scope and mounts.

600mm TJ (CrMoly steel) with a custom high flow 485 marine brass barrel inlet. This barrel is match grade. Had to buy 3-4 blanks before I hand selected this one for my personal collection. 14.02mm OD will work with the Impact, Maverick, Wildcat, Crown, etc.

Chambered / throated the lead in with a 2 deg live-piloted reamer that I had custom made by PTG for the TJ's .30 bore/groove. Shoots obscenely well with a variety of ammo. 1/2-20 thread on the muzzle, bore was lapped and polished over 3 separate sessions with a slight taper (a few ten thousandths of an inch). I'll include some high BC 62 grain Varmint Knockers with this one.

Terms: 399 + shipping CONUS. No lowballers. Price is as firm as the barrel.

Scope is in good condition with a couple minor blemishes.

$85 shipped (without scope mount)

$100 shipped (with scope mount)

Looking for a jam nut aka front end rest ( the one with the drill hole for tightening) FX barrel tensioner kit for FX Impact 22 cal.
Luis
[email protected]

1. LG300XT in LG400 blue universal stock, yes it is an LG300 in an LG400 stock. With R10 pellets, its was shooting at 578 fps with an SD of 2fps for 10 shots, very accurate but I prefer the loading of my lg400. Comes with an original regulator (the installed one is an upgraded mk2 version but still at 6J), a spare hammer and valve, plus some spare springs.

$1000 plus shipping or $650 shipped for the lg300xt action plus spare parts

Lg300XT

.

Not your average Maverick. Benchrest ready out of box

K&L chassis
K&L KLS-3 benchrest buttstock and bagrider
K&L weaver rail ( gets bipod out a bit farther)
Sabertactical adjustable cheek rest
Sabertactical TRS top rail
Sabertactical vertical grip
Custom brass trigger shoe
Donnyfl tanto
700mm Fx 1:40 liner
Carbonfiber liner cover
Larger cocking handle from Fx Panthera
Fx impact shroud with bonded air stripper
300bar 700cc airmarksmen bottle & valve

Rifle was tuned by ken Shapley his magic worked through out the rifle. over 40 hours went into the tune. It can get 70 plus shots with a ES of 7 from a 300bar fill. The shroud has a custom air stripper that is bonded to the donnyfl tanto. Trigger is tuned for tiny first stage and a break weight of 8oz. This rifle can shoot 235 cards if you do your part. Will shoot the Jsb 44.8 on high power wheel setting 960fps will also sling 50gn Aeas as well if not better. It breaks my heart to list this rifle as i love it. But im moving to a new brand for benchrest. To build this rifle you will be well over 3k dollars.

4 mags 3 stock 1 aftermarket

I will consider trades for
Corbin slug press and swages

Raw 22 or 25 caliber in Master piece arms chassis

Epic Airguns Two Tactical Long With Carbon fiber bottle 22 or 25



Scope, rings, brass weights, bipod not part of sale. Will ship in fx hard case.

2000.00 buyer pays actual shipping cost CONUS only i use pirate ship so it won't be crazy.

My feedback is solid buy with confidence

Looking to part ways with my Great White tank. It is fully loaded with all the options top gun provides minus the edgun fill trigger.

I bought the tank brand new from top gun Airgun’s about 3 years ago I believe. I can provide the manufacturer date if you are interested. Will include actual pictures of the tank when I get home.

Tank was only filled at my local airgun shop about 8 times. Has been sitting on a shelf in my garage for a year unused.

Looking for this to be a local sale around San Antonio, TX or within 1-2 hour drive from San Antonio.

Asking $500

Will accept cash or pay pal.

Please PM if interested.

Thanks AGN.

Walther LGR. It is a nice unit. Has an embossed german shop logo on stock. Ready to shoot & needs nothing. Bluing is great & so is stock. 7-8/10
Will ship in the USA.
Thanks Joe

Selling my Renegade .25 HP with a DonnyFL Ronin and Athlon Talos 3-12x40 scope. I am the original owner. The rifle is currently set up for left handed shooter, but can be switched to right. Very accurate gun with the electric trigger. Selling because I dont go shooting enough.
Any question feel free to contact me.

$800 plus shipping

Hi All.

Looking for an old school Kalibr Cricket, either in .22 or .25.....

Not picky on stock etc.

PayPal for pmt.

I have several used tanks they are 6.8L
These are expired tanks , but are good for personal use. They are rated at 45 min at 4,500 psi. The have 5/8 flare threads. I have to sell these as is. I have 3. $30 plus shipping to wherever you are.

Hi All,

Looking for an original RTI Prophet Performance in .22 with the long range pellet barrel.

I have a serpent arms 28ga air shotgun.. works great.. seeing what's out there for trades.. let me know what you got or $1000

Let me know if you have one you’re willing to part with.

Thank you

James

$ 30 shipped

175 OBO shipped I changed my mind on the build so I'm letting it go includedpicatinnysight mount addition. Like new.

This is a JSR Raptor 30 caliber at 104 yards shoots quarter inch groups…extremely accurate. I really don’t care if I sell this gun or not but I have so many 30 calibers can’t shoot them all.. comes with 4 magazines just went over and had Jefferson State air rifles put his latest valve in it hammer and spring, and put all new O-rings easiest gun in the world to work on.$1375

scope, bipod and moderator are not included.

Looking for a 25 caliber slug mold.
iThe mold size would need to be .253 or .254.
Let me know what you have and we can work something out.
Thank you!

“Beeman/FWB 300s Junior”





This is a Beeman/FWB 300s Junior predating the 300s Mini. San Rafael stamped. Bluing in rough shape, but functions. Stock in the desired Junior cut away stock. also has original Diopter sights. Selling for a friend. 600 shipped. 865-696-8946

Good condition ready to go on your Gk1
$180 shipped