Here goes. This one has been a fun gun. Super easy to work on. Shoots very very good. Ill try to post everything i can remember but this is a full working shooting gun. Just air up and go. No leaks no problems. Ill have to shoot a string to get the chrony numbers again to show how consistent it is.

Umarex Gauntlet .22 - Heavily modified
- 22ci tank
- Hajimoto Super Tune Kit
- Increased Reg Pressure
- painted stock
- DonnyFL aluminum air stripper
- vented shroud
- Hajimoto baffles
- polished barrel
- polished breach
- polished bolt
- reduced cocking and loading effort
- enlarged transfer port
- moderator adaptors
- carbon moderator
- carbon barrel sleeve
- super light trigger
- threaded bolt handle
- picatinny rail under bottle shroud
- 8 magazines, 4 still in package new
- custom carbon FX Chronograph hanger
- 1/2-28 delrin moderator adapter
- loves and is tuned for AirArms 16gr and is super quiet - $400

Super consistent and currently tuned for the airarms 16gr. Last shoot was a 100yd benchrest. Did very well.
I really dont want to sell as this gun is the most reliable fun shooting gun i have but on to other things.

Have a polished titanium dragon scale bolt knob i can sell for $30
Have a donnyfl moderator 1/2-20 gauntlet aluminum adapter i can add for $30 more.

Ive bought and sold on other forums dozens of times over the years. Perfect ebay and any other places i deal.

Brand new Eaglevision Scope Angle Degree Indicator. Listing price $19 shipped conus. I prefer PayPal F&F or add 3.5%, also accept Venmo. No trade, thank you!

-This unit is designed to be fitted to all Eaglevision scope mounts; it can be fitted directly on the left or right of Eaglevision mounts & scope rails – no additional bracket is required.
-The ‘Angle Degree Indicator’ is a simple tool for hunters operating in mountainous terrain, it is utilised to obtain the correct reading for gravity / distance to the target.
-The Angles are depicted in degrees and are laser engraved onto the body in five degree increments.
-The unit is shock proof and resistant to chemicals such as acetone and cleaning solvents. Completely mechanical, there are no batteries or electronics to fail.

Rifle Scope Angle Degree Indicator

Updated to mark items sold - 12/16/2022

Very little use on any parts below. A couple liners never shot. Thought I was going to make two different systems so I would find which liners work best for pellets and which for slugs and then just swap out the whole barrel kit. Bought everything, tested a little, and it set on the shelf for a while. Then decided to go to 800 mm so now selling all of this.

The top kit is the M2 version that has the larger FX threads at suppressor. This includes original FX suppressor along with a couple different adapter rings that will fit into Donnie FL suppressors. And one .30 probe.

The bottom kit is the M3 version which has the 1/2x20 threads on the end. It also includes the Huma High Flow Dual Hole Transfer Port. And one .30 probe.

Twist rate is marked with permanent marker on all liners in pictures below.



All prices below are shipped CONUS and PP F&F or add 3% for fees. Pricing separately for mix and match or one price to take everything.

Top M2 kit with one liner now only shroud, FX moderator and Donny adapters- $50
Bottom M3 kit with Humma port and one liner - $325 $295

Add to either kit:
FX Carbon fiber liner sleeve - $20
Additional STX liner - $80

Total value of everything listed around $1,000. Priced as above $755. Buy everything listed as one $625


View attachment 20221113_173941.jpg

View attachment 20221113_174044.jpg

As the title states, looking for Cricket Carbine mini in .22.

Selling a backup ft pistol with my personal tuning and prep done to it.

Trigger contact points polished to 2000grit
Custom Light weight hammer
New springs, hammer and valve.
Valve porting, and setup.
Huma Regulator
Some secret mods I don't share.

This is the fourth one of these I've built and every owner I've sold to loves them.

This pistol gets 55 shots per fill at 11.2-11.5fpe with JSB Heavies. No need to fill in the middle of a match, fill before the match take a couple shots to make sure it's zeroed and then shoot the whole pistol match. May trade for other airguns.

$775 shipped for the pistol.

Can sell with one of two scopes if interested. The Airmax is the scope that set match overall high at the 2021 nationals, and the vantage set the match overall high at the 2022 nationals.

Hawke Airmax 30 SF 3-12 AMX reticle $300
or
Hawke Vantage 3-12x44 Side Focus 10x mil reticle. $125

Text or email:

(Nine16) 531-two349

Camsprecisionairguns (@) Gmail.com

Up for sale is a Hawke Sidewinder 30 SF model #17270. The scope was mounted, but never outside and no scope ring marks...So basically new in the box with everything that came with the scope....Scope wheel, bikini lens covers, and "nub" to screw into the magnification ring. Of course the lifetime warranty Hawke has for this scope. I like my FFP scopes better is the only reason I am selling it.

$500.00 shipped PayPal F&F or you pay fees.....No trades

Tony P.

I have a LNIB Umarex Gauntlet 2 in .22 caliber for sale. I won this gun at EBR 2022, since winning i have cleaned the barrel, put air in it, and fired about 50 rounds through it. Everything works as it should and it is a good shooter. Since then it has been sitting and holding air perfectly. The gun takes a back seat to my others so I'm looking to sell. Gun will come with everything as it would if you were to buy new. Asking $310 shipped to CONUS only, PayPal FF works or please pay fees. PM if interested

Possibly in the market for one in 177. Already have a 22. Hit me up if you have one.

I got this pro chrono. Asking $95 shipped. Very accurate, but no longer needed. 1 battery included.

I am selling one of my Benjamin Bulldog .357cal airguns. The airgun shoots perfectly. There are no problems whatsoever with the airgun. The following accessories are included in the price:

• Carbon Fiber Barrel Supports.
• PitBull Power Spring.
• DonnyFL Suppressor adapter is installed.
• OEM barrel adapter is included.
• Caldweld Max Grip rubber sling.
• Front pic mounted laser sight.
• Carbon Fiber bipod.
• Comes with 2, five round magazines.
• Ships in Original Box.

Price is $500 + $20 shipping CONTUS.

Traded for this svelte beauty last fall and have decided over the winter months that I want something more compact. LOVE the adjustability, low weight, and incredible accuracy and power out of the DL platform, but thinking bottle and short barrel is next in line for me. I know I can convert this to a DreamTac, but would rather not swap everything out and have to sell takeoff parts at this time.

Wouldn't be opposed to trade offers for 25 cal Impact, AGT (Vulcan, Uragun), Airmaks, Edgun... Plus cash if need be. Prefer forward (non-bullpup) lever and controls. Love the look of a wood butt stock on AGT and am leaning towards that route, but am interested to see what's out there, so shoot me what you might have to trade. I'd sell for $1300 with the below accessories.

Currently tuned to push 25gr JSB's at 900fps with fantastic accuracy out to 100yds. Beautiful 15oz match trigger - going to miss that, for sure.

.25 Dreamline Lite w/ 600mm STX barrel (SCOPE & RINGS NOT INCLUDED)
-FX 17cc Power Plenum
-Aeron CZ Picatinny 20 MOA Rail riser
-(2) FX OEM 16 pellet Side Shot magazines
-3D Printed Single Shot loader
-ATI Tactical Cheek Riser
-3D Barrel band
-TuF lower picatinny rail extender with UTG rubber covers
-Fill probe

Shipping included with all

OBO with all

Paypal f&f or add 3%

Cont US only

PM for pics

Fx Dreamline/crown .22 600mm stx superlight barrel system with heavy liner $200

Bushnell Forge 2.5-15x50 30mm MOA in box all papers etc $350

Impulse Air 1200 .25 as new $150

HN 21gr .217 slugs $13.00 4 available

HN 30gr .218 slugs $13.00 10 available

Prefer .22, but open to all calibers.

Selling an extra that I had. Some wear from where scope was mounted. Includes original Egun hard case. Custom sling swivels, custom 2 stage spring plunger trigger mod (www.springplunger.com) #67009x, neoprene pad on air tube. 32 shots per fill. JSB RS 13.4gr (765 fps). HS adjustment, 45fps per click. $1150 Paypal FF. Shipping included to lower 48.

As the title sad .. wtb a .30 condor or .30 condor parts .. members with feedback only , don't text about what your friend have.. thanks..

I have a Donnyfl Sumo 25/30cal. It is in great condition with no marks on it. It has the 1/2 X 20 female threads.

$125.00 shipped to the lower 48. Text me at 405-664-4695 if you would like to see any pictures. There are no marks on it.

This Hawke Vantage 30mm red-dot scope with integral 11-13mm dovetail mounting rails is in excellent plus cosmetic condition, and functionally perfect with no problems or issues of any kind. NO factory box, papers, lens caps or accessories. Real-world/cyberspace new price on these (with factory box, papers and lens caps) is $110 . I’ll take $65 TOTAL, including Priority Mail shipping in CONUS.

ALL technical specifications can be found in this link-

Selling my Element Nexus 5-20 x 50 with the illuminated 'Clean' MOA reticle. Scope is in excellent condition and includes a set of Element Nexus specific Tenebaex Scope Caps. (These caps are currently selling at UA for $130). Everything provided from the factory is also included, scope cover, focus knob, battery, sun shade (unused), dust cloth (also unused) and instructions.

Thanks for looking and let me know if you have questions.

Asking $1,100 shipped to the lower 48. PayPal FF or PayPal invoice with additional 3.5%.

******* SOLD PENDING FUNDS ************

TALON TUNES AIRFORCE CONDOR SS .25

For sales is an absolute mint condition Talon Tunes Airforce Condor SS in .25 caliber. Purchased directly from Tony in September 2018. This gun shoots lights out and packs a hard punch.

Shooting JSB Match Diablo EXACT KING .25 (25.39 grains) it averages about 876lbs for about 50 shots.

Tony performed the following on the gun:

• Two set screws are installed and adjusted for the trigger to precisely control the first stage of Travel, and the amount of overtravel. This takes the trigger from the Factory’s stiff pull to a crisp and consistent pull for improved accuracy, control and feel.
• The breech slide O-Rings are replaced with 90 Durometer o-rings and the breech slide and barrel are mated for smooth operation and a tight seal.
• Barrel is polished where the breech o-rings ride.
• Valve is disassembled, polished and ported for improved operation and air flow.

Also Included:

• AEON Scope: 6-24-50 SF
• TalonTunes Quad Rail
• TalonTunes Tank Adapter
• TalonTunes Custom Grip
• TalonTunes Gen.6 SOS Shroud/Sound Moderator 9 (never used!)
• Airforce Ring-Loc Valve Kit

Check my feedback on eBay as: Fbuck77

I am on numerous other forums: Muzzleloadingforum; AmericanLongRifles.org, Archerytalk.com, TradTalk.com, RimfireCentral.com etc.. as RANGER94

I live on the PA, DE, NJ border, thus if you are in my area I can meet up with you .

$1,000.00 via Paypal – 3% you pay the fee. Free Shipping

I have a set of 25 mm no limit rings with picattiny base to trade for 25 mm with 11 mm dovetail. Like new in perfect condition.

Looking for a Kraford & Lypt RTI Range Extender for my Airforce Texan. If you have one that you want to part with, contact me at [email protected]. -Dave

I'm selling a beautiful Leupold Vari X 4.5-14x50 AO. This scope focuses VERY CLOSE, sub 10y. Duplex reticle and very clear glass. Comes with Butler creek caps.

$525 shipped. (These are listed for $699 on eBay)

Contact me via email or text.

camsprecisionairguns(@)gmail.com
Nine16 five31-2349

Airforce Escape .22 cal - $399

Purchased last year, very lightly used, nearly new condition, no issues or leaks. No trades. Paypal F&F

Upgrades:
DonnyFL 1/2"-20 adapter
Wokguard trigger guard
AR style pistol grip
Extended air tank (2x shots per fill)
Custom buttstock

Lost the original screw, so a stainless one is in there now.

59 shipped, PPFF

Hey guys! Took my new .177 Field Target out for its maiden voyage today at the weekly Tuesday “Old Geezer Match. It was set up at 26yds with a 1” KZ reducer installed and was shot with 12 FP Springers and 20 FP PCP rifles. It worked perfectly. Then at midway it was moved to 53 yds and reducer was removed and then shot at with the same rifles. Again it worked perfectly. Was easy to reset and when paddle was hit it went down.
The reducers are installed on the outside of the faceplate as per AAFTA rules.
I don’t have a video of it working but it is very reliable and showed no damage at all.
I bought my own welder and am doing my own welding. So I am able to reduce the price on them. Anyone that purchased any prior to this I will be dealing with each on an individual basis. I have been asked to have them fall at a 55 degree angle so there is more movement in the target. I will start making more of them and will have mechanisms in stock and will just need to know what faceplate style you want. I can cut almost any design for the faceplate. More intricate designs are a bit more $. The new design now have less welds and and only 3 visible welds.
Contact me if you are interested in them. They are high quality and are not the least expensive targets available they run $130 plus shipping. They come with 2) reducers of your choice.
For a well made and trouble free target give it a try!
I have tested my new design regular FT in 4) matches and yesterday was a 60 shot match. Target worked perfectly and had no issues. I will test it again next Saturday in another local match. But so far so good!