For Sale custom Airgun Revisions Benjamin Marauder in .20cal regulated with Walther Lothar barrel, With Turkish Walnut stock with adjustable comb. Gun is super accurate.

Gun comes with 4 Carm mags - and Airgun Revisions Thumb rest. & 2 tins Pellets seen in picture-& 1 box Slugs that is 90% full see pics.

There is 1 scuff on the barrel band, other than that it’s mint. ( see pics) also have a box of Neilson slugs that will go with the rifle - I had taken several chipmunks out with them .

Selling without scope and bipod, but can add for additional $350.00

Looking for $700 + shipping for gun no scope nor bipod- ( United States Postal Money Order) in the continental USA 48 states .
No scammers - deal with reputable forum members only. For additional details message me.

For sale Airgun Revisions custom Crosman Challenger / Hunter Field Target competition gun .177 side lever action.
Gun has been amazing, will put same pellets through same holes with Air Arms 10.3gr Diabolos.
Gun is shrouded making it very backyard friendly without the need for extra moderator, but can add one if wanted.
I don’t compete, but used gun for indoor target practice and backyard chipmunks with great success.

Gun shown with Vector Sentinel 10x40x50 mounted- and has UTG Bipod / Arca mount.

The gun has a slow leak, from a full charge of 3000psi in a week it will leak down to 1000psi- this is the only issue with the gun, I didn’t try to fix the leak, I didn’t want to effect the warranty. And am selling at a discount due to the leak.
Doesn’t affect a shooting session though.


Gun only for $600.00 Firm + shipping or as package deal Gun with the scope and mounts & Bipod $750.00 + shipping Continental USA -
( United States postal Money Order)
Please no scammers , only deal with reputable forum members.

For Sale Beeman 1357 underlever .177.

Gun has been upgraded - has Buck Rail barrel band / pic for Bipod. Buck Rail shroud Adapter & moderator, making it back yard friendly. Has a UTG scope 4x16x44 mounted. Also has high capacity Air Venturi magazine. Gun is in like new condition- been lightly used - it is a good accurate shooter.

Looking for $300.00 shipped ( United States Postal Money order)
No Scammers - deal with reputable forum members please.

For Sale Beeman R1 San Rafael Left hand Factory Stock in .177.

I am the 2nd owner of this gun, I consider this a collector’s gun , I have all the original paper work and Receipts from the original owners / purchase receipts and all original Beeman paper work that came with the gun. He cared for the rifle when was in his possession.

This rifle was SPECIAL SUPER TUNED by Beeman. And Have the original open sights for the gun as well.

The original owner that sold it to me said the gun was in his safe for very long time and had not been shot, I figured the seals were probably bad, I test fired it to confirm this- I sent the rifle to David Slade / Airgunwerks & he did his Master Tune to the rifle, he did an awesome job as usual.

The gun shoots awesome , loves 10.5 gr pellets, not pellet picky shoots a variety well. I don’t have more than a tin of pellets through it after the tune.

I rate the gun in excellent condition - it does have some normal minor handling marks. Selling to thin my collection, have to many guns and no time to shoot all of them.

I have over a Grand into the gun - looking for $650.00 with scope / mounts included, plus shipping.
(United States Postsl Money Order )
No Scammers , only deal with reputable Forum members please.
For any additional info or extra pictures send message.

Good day,



Willing to sell my K&L

FX Impact Gen 2.2 Trigger Guard​

For Sale Customized AR2078 CO2 Target Rifle in.177.

I’m the 2nd owner of the gun, it was originally purchased from Flying dragon Airguns, he had Mike Melick Tune the rifle, ( his tune note is included, see picture) , he also sent it to Rich from Michigan to make costume moderator for the rifle.
The gun shoots a variety of pellets extremely well, the Tune card tested out RWS Super Mags , I also found it loved Gamo Hunters as well. Will shoot same hole groups at 25yards.

Rifle has several upgrades- Archer air custom 91/30 Bolt Handle , Archer Air Steel Barrel band - ( original barrel band and bolt handle will also come with gun). Also have Bulk fill adapter and 3 different fill / caps - and HPA adapter. ( I only ran C02 in gun while I owned it). A Ninja 3000PSI tank for C02 bulk filling. And brand new Archer air Seal Kit.

The Stock has been modified to allow Left hand shooters to use the rifle comfortably. Stock and metal are in good shape, with normal handling marks.

The Rifle was in gun safe for long time storage, I tested with C02 and it does have a leak and will need Reseal ( reseal Kit included). Fun project for a Tinkerer.

Selling as a Package deal , looking for $175.00 plus shipping ( United States Postal Money Order)

Selling GoPro HERO7 scope cam setup. You will receive 30 mm and 34 mm scope camera rings as well.

This is a Reximex Meta in great shape,a couple very small scratches on the air tune but otherwise in excellent condition. No leaksand shoots 10g slugs very well along with 13g and plenty of pellets as well. Included is the fill probe, 2 magazines, 2 tins of 10g jsb slugs, affixed moderator and reximex hardcase. The thermal scope and bipod are not included, but I do have a scope if needed that can be added. Trades are possible. $450 shipped for rifle,mags affixed mod and ammo.

Just back from Air Guns of Arizona (see invoice) for a Huma-Air Gauge install (both) and 27cc Plenum Extender install and a leak down test to ensure everything is in perfect working order.

Included in the sale:

EVOL 30 w/OEM Moderator $2895.00 RETAIL
DONNY FL Ronin Moderator $185.00 RETAIL
DONNY FL Adapter $40.00 RETAIL
EXTRA 30 Magazine $98.00 RETAIL
BARREL REMOVAL tool. $98.00 RETAIL
MODERATOR NUT tool. $40.00 RETAIL
Extra EVOL42cc Plenum Extender $79.00. RETAIL
EO HELIX 4-16 x 44 FFP Scope $459.00 RETAIL
FX No Limit Rings $79.00 RETAIL
Total Retail $3,973.00

Offered at $2500.00 or since many have asked, I will sell it for $2200.00 without the scope and rings. No Trades.

Payment by Cash or Zelle.
Sale will include a Bill of Sale signed by both parties.
Buyer pays shipping. Located in Tracy CA

Only pictured items NOT INCLUDED in this sale are the front bi-pod and rear mono-pod.

This gun, after fitting the 27cc plenum extender is now as much of a laser with slugs as it is with pellets (see attached groups).
You now have the versatility of shooting JSB 44.75 pellets or RMR 44.5 Slugs (essentially FX hybrid 44.5’s) without making a single change to the gun. Just pick your ammo re-zero and shoot!
This simply was not possible before installing the new 27cc plenum extender.

It’s really an even more amazing gun now!

These don’t come up very often so- act FAST!!

Up for sale is my Side-Shot Scope Cam(cell) set up. Comes with 2 34mm scope tube adapters and tools. $135 shipped PayPal (D&D or buyer fees)

818-856-5698

Like new RAW HM1000x .30 in RAW chassis. Has a 700cc bottle installed and tuned for 44.75 right at 900 FPS.

Newest style barrel with 1/2 UNF end cap so you can install any moderator desired…..

Shows no signs of use and has not been adjusted in any way.

Includes one magazine.

1250.00 and we can split the shipping. Selling as I picked up another in the laminate stock that fits me better.

Bipod, moderator not included

FX Crown MKII with Nordic Wolf GRS stock. This rifle is set up with a 500mm .22 barrel. Asking $1500 TYD for rifle with, two FX magazines, and a hard case (scope, wheel and bipod not included). PayPal (FF or invoiced if you pay additional %) preferred.



I machined out a place for an inset Anshutz UIT rail which is screwed and epoxied in place (similar to the Dreamline GRS stock). Included is a 45mm long picatinny rail which slides in the UIT rail allowing me to use picatinny bipod attached to the stock rather than the bottle adapter.



The rifle has the FX Crown Power Upgrade kit (new spring carrier, 10 gram hammer weight, pin probe) installed, but I decided to put in a heavier Huma Brass hammer weight and keep the pellet probe. I will include the parts removed as well as the pin probe and 10 gr hammer weight.

As setup now I am shooting JSB/FX 18.1 gr pellets at 880fps with an SD of 2 and an ES of 9. I just tried the AEA 21.9gr Diabolo pellets at 820fps and am getting ES of 7 and SD of 1.5. Check out the AGN 30 Yd Challenge for an example of the accuracy at 30 and 40 yds. Last week scored a 200/200 with 15x’s on the 30yd Challenge with the 21.9’s (see Post #3018).

30-Yard Challenge | Page 151 | Airgun Forum | Airgun Nation | Best Airgun Site | Airgun Message Board

Barra 3600psi hand pump

60.00 free shipping. Box has never been opened. Still sealed.

SOLD …

I have a box that holds 22 pellets so you can spray paint the bases to make tracer pellets. I think these sell for $65 plus shipping. I am asking $40 shipped. I used it once and it comes with several extra $$$ face plates.

WTS, Brand new RAW 22 magazine. $55 shipped in lower 48.

Selling a Brocock Orion 6 BACS Revolver in .177. This is essentially a re-barreled (and somewhat additionally restructured) Weihrauch firearm modified to shoot BACS cartridges. These are individually aired-up cartridges that behave exactly like any other PCP reservoir and are fed into the .38 cylinder just like .38 rounds. It’s an ingenious system that went extinct over a decade ago after being outlawed in the UK. I can all but guarantee you will not see another one of these revolvers listed for sale here or elsewhere for a long, long time—especially not one that WORKS!

The gun itself is beautiful and in pristine aesthetic and working condition. It handles and feels like a real firearm because, well…

Selling the gun with 6 cartridges, proprietary hand pump, and original box.

Asking $850 shipped CONUS.

Just mounted rings throw lever and comes with end caps and sunshade 450.00 shipped only selling because I can use the money paypal fanf or add 3 percent
Thanks

Daystate Delta Wolf .30 caliber in mint condition. Only been shot a few a sessions and one 100 yard BR match at Fairfield Sportsman Association. No leaks, shooting very accurately and repeatable. Comes with the following.

Discovery Opt 5-40X56SFIR FFP 1/20 MRAD Zero Stop / Model: ED-ELR
Eagle Vision Infinity IPS-30 2-Pc 34mm Adjustable Mount
.25 / .30 Fatboy by DonnyFL $30 - Extension/Extender Tube
ALPHA/DELTA WOLF PRS GEN4 ADJUSTABLE BUTTPLATE WITH MONO POD AND BAG RIDER (ADAPTER INCLUDED)
Case & all paperwork
Price: $2,800
Payment Methods: Zelle, Apple Pay & Venmo
Shipping Cost is extra.

email: [email protected]

Woopsie, wrong photo!




.308 Caliber

I have Arken Zulus 5x20 with range finder and ballistic calculator excellent condition

Include eight batteries and external charger

500 shipped

**I can do a trade with element immersive scope**

.25 FX Impact Mk II in excellent condition. No issues or leaks. Rifle has been properly maintained. Excellent accuracy with JSBs and FX hybrid slugs.
Package includes:
FX Impact .25 with custom adjustable butt pad and Donny FL moderator
Falcon Menace FFP 5.5-25x mildot scope
.30 600mm barrel and probe with .30 Donny FL moderator
Extra bottle
.25 and .30 magazines
2 tins of pellets, .25 and .30
Ready to shoot!
$1400 for complete package excluding shipping. Rifle only $1000.
PayPal only (add 3%)
Serious inquiries only!

New sideshot scope cam. With all 3 Clamps 34mm 30mm and 25mm

The unit its self is 189.99 with one clamp each extra clamp is 60.00 retail 300.00 plus value

250.00 shipped

Would trade for a Eaglevision gopro Scope Cam set up

Going through my bins, I came across (2) FX Sideshot mags for the Wildcat MKIII .22 that I no longer have. Offering the pair for $65 shipped, CONUS. They’re $49.99ea new. PP FF or USPS MO

Also have a WCMKIII/Maverick .22 pellet probe. Tastefully modified to mimic the Huma high-flow pellet probe. $20 TYD

All for $85 TYD

Made another batch.

New designs added!

No more worrying about snapping magazine holder O-ring or not finding a comfortable spot to on your Leshiy 2 to attach your magazines on the air tube. This magazine holder stores your extra Leshiy 2 magazine(s) right under the scope rail with a strong N52 grade Neodymium magnet. The magnet has over 4.2 pounds of pull force. The magazine holder can be installed in under 5 minutes.

See video for details.

$20 each for the single magazine mag holder

$40 for the dual magazines holder

$55 for the triple magazines holder

$65 for the 4 magazines holder

Please include $5 to cover shipping within the USA. Orders outside of the USA will be calculated when I get your shipping information.

PayPal F&F or add 4% for fees






Newly released updates
Dual magazines holder


Triple magazines holder


4 magazines holder

Realized I have no use for it. But, I did make it extremely light. Skeletonized. Comes with 1 magazine and a probe. Shoots 8.4s with great accuracy and room for more improvement. I’ve got em around 845 FPS.

Foam cover over hammer spring adjuster. Simply remove foam cover when you want to adjust.

$580 shipped