Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

I purchased this vintage Crosman 38T pistol recently due to its excellent condition, but am keeping my collecting focus on older airguns for now. This pistol is 100% functional and holds CO2 with zero leaks. This is one of the models with the plastic rear sight. Comes with the original box which is in very good condition. The pistol itself is near mint for its age with only a few minor bits of wear to the paint. From the samples I've seen while looking the are not many without the paint destroyed on the muzzle and the end of the barrel dinged up. As you can see from the pictures, this one is extremely clean.

Price: $195 obo SHIPPED

WEIHRAUCH HW97K.22 black synthetic. Great condition barely used. Un modified unaltered. Smoothest sprinter ever. $450 + shipping (714)406-0297

I am selling a midwest elite impact .22 magazine. The magazine is around a month 1/2 old. No longer needed as I switched over to .25. 40 shipped, PP F&F preferred.

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

I've been collecting a lot of pistols over the past few years. Honing my collection to older, more unique and harder to find vintage pistols. As such I am selling off some newer pistols in my collection. All of these pistols are in excellent condition. The HW triggers are amazingly crisp for springer and SSP pistols.

Please note: Offers will be considered, but for multiple buyers priority will go to the one closest to asking price.

PACKAGE DEAL: Only while all 3 pistols are available. Take all 3 for $900.

Beeman P11 .177 Magnum Springer pistol. Same as the Weihrauch HW 45. Love how this pistol shoots. Two power levels based on how far you cock it. Over 500 fps on max with 7-8gr pellets. I purchased this used and have put maybe 100 shots through it. It's still breaking in as far as I can tell as I'm still getting a little smoke out of the barrel with full power shots. Will definitely challenge your shooting skills. Haven't seen these in stock anywhere for a while.

Price: $375 SHIPPED





Weihrauch HW70A. This springer pistol I purchased new from AoA a year or so back. Excellent springer pistol still breaking in with under 100 shots. A different shooting experience than the P11 above due to the break barrel design but still very accurate if you do your part. The original box and manual are included; however, the 2x pistol scope is not included. The dovetail rail will accommodate standard scope rings or a nice red dot setup.

Price: $225 SHIPPED




*************SOLD**********

Weihrauch HW75 Single Stroke Pneumatic pistol. This pistol is one of my favorite. The SSP system is super easy to cock and has wonderful recoil free shot cycle. Excellent trigger. Another HW pistol I haven't seen in stock anywhere for a while. I purchased this pistol used and have put 100-150 shots through it.

Price: $400 SHIPPED SOLD

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

Thinning the herd after acquiring too many airguns this year. Purchased new by me direct from Talon Tunes earlier in the year. This Taipan Veteran Compact in .22 caliber is an amazingly accurate airgun. I've shot some extremely tight groups out to around 40 yards with JSB 15 and 18gr pellets. Wonderful trigger as is typical of the Taipans. Upgraded to a Huma moderator for more precise setting of reg pressure (set to 120 or 130, can't recall). Installed DonnyFL speed adjuster will take you very quickly from 500 - ~900 fps with JSB 18gr with very consistent velocity. Also has a DonnyFL moderator adapter in case you want to quiet it down more. MagPul pic rail adapter mounted under stock.

Comes with 6 - 10 round magazines and the Taipan magazine holder attached under the scope rail.

I consider the condition to be very good.

Package Includes:

• Taipan Veteran .22 Compact
• Original box, manuals, test sheet from Talon Tunes, fill probe, SST, o-rings and other accessories.
• 6 x 10 round magazines
• Taipan Veteran Magazine Holder
• DonnyFL Moderator Adapter
• DonnyFL Speed Adjuster
• Huma Regulator Installed (stock reg included)

Retail for everything new is over $1,800.

Price: $1350 SHIPPED SOLD

I will included everything well packed in the original box which will then be padded and packed in a second box for safe shipping. Please reach out via PM to purchase, with any questions or if you want additional pictures.

i got a project rifle its a jumbo same as np 500 action full 20 inch barrle with large shroude has end cap cover for 1/2 20 has after market band and has a up greaded carbon tank has a super small leak i not found yet goes from 250 bar to down to 100 bar but takes weeks to do that has a brand new jumbo stock on it never mounted this is a progect gun shoot fine i test fired it it holding air at 100 bar been holding at 100 for over a week there some little leak some where on it

Selling these 2 molds together. Sizes and models as shown in picture. Good condition. Asking $55 TYD CONUS
[email protected]

I have 2 vintage RAWs A .25 and a .30 Beautiful old World workmanship by Martin. These are as new only shot to dial in the scopes. I have been there caretaker since birth in climate controlled safe. Just too pretty for me to shoot. Both have Carbon fiber bottles, Aeon 8-32x50 scopes with BKL mounts, reseal-kits from Martin, 4-5 magazines each, hold air forever and owners manual. Sold as a pair. I will not seperate. We can discuss shipping

Gun has some scratches/scuffs from use but is in excellent working condition, shoots great. Comes with 2 mags. Does not come with scope/rings, moderator or bipod rail. $700 shipped to lower 48

Great White 550 Cu In/97 Cu Ft 4500 PSI Tank for sale. Deal I had on PCP rifle didn't work out so I will stick to loud guns for now. New with all 3 options (bought from Top Gun this month) and never used. Also a new/unused TUXING 300Bar 4500Psi PCP Oil Water Separator Molecular Sieve High Pressure Diving Filter.
$850 for both (includes shipping to CONUS). Text me at 334-701-0218 if you have questions.
Thanks

I have an Air Venturi Avenger bullpup in .177. Included is a 3-10×40 Bushnell elite scope, AE swede trigger mod, 13 tins of pellets, original box and 3 magazines. I am lookimg to trade for a bare .22 or higher, pcp or setup depending on value. Prefererably not an avenger, but we can talk.

View attachment 317123

View attachment 317124

Selling one of my beloved guns. Perfect hunting machine! This gun is set to shot JSB heavy 34 grain at about 930 - 940 fps and 34 grain slugs at about the same speed.
This gun is very easy to maintain - everything is super straight forward. Its very accurate - I was able to do under 1" group at 55 - 70 yards. I didn't shot paper at 100 yards - but it will do very good as well.
Two magazines are included. Scope is UTG 4x16x50 not included in price but I will sell it for $100
The gun is quiet on its with built in moderator but u can use additional moderator.
The gun is in very good condition.
I actually love this thing and will hate to let it go.. But I have 10 guns now - something must go. I have 2 of these - will keep one. I will also sell one of my Crickets (request info if you are looking for Cricket).


The price for gun only - $950 shipped.
With the scope -$1000 shipped.

Selling off the ones I rarely use. Hatsan Vectis .25 lever action. Maybe 100 pellets through it. Just to loud for my backyard. Excellent condition. Zero issues. Holds air. Two mags, fill probe, one tin of .25 pellets, paperwork and original packaging with seal replacement kit. $220 shipping included within CONTUS. Zelle or PayPal f/f or + 3%

As the title states 110$

100$

WTS/T MY hp standard custom edition .25cal it comes stock . i had to send it in to have the hammerspring adjusted and polished till it is now very smoothe.
50fpe power level 18inch barrel under a 24"shroud with baffles taking up the slack(the gun is quiet enough it does not really need a moderator. i have the adapter ending in 1/2x20 unf but to get it you will need to pay for the shipping or $30 which ever is less...
i would like to get $500 for it but price is a little negotiable. or trade for a similar power level air gun(50fpe-55fpe) and under 6lbs.
there are a new set of breach and barrel o-rings in ziploc siliconed in the box for if and when they are needed(i felt a little air comming from between the mag and breach but it is only a minute puff and thepelletshop did not feel it needed fixing so i asked for the o-rings and they were sent ...
otherwise the rifle is stock and if you ask me to i will go get it and take a picture but that is a hassle.
update , i made a modification to the bolt removing 2mm off the tip and buffing it smoothe again. this caused several things. first you can now insert or remove a magazine without having to manually hold the bolt back, it works like the challenger models now. buyt uinserts from the left instead of right. secondly , before i was only getting 2 shots less than 3 mags on the regulator, and now i am getting 50-54shots full power(50-55fpe) and i got anothe 16 shots off the reg. took a whole 7 minutes to re-fill air cylinder.
my hammer is set as light as it can be, my reg is near 2350pfi and my power wheel is at 12 noon. so there is absolutly no negative issues with this air rifle, and i may just kkeep it now that it works so much better... goodness i need to mod more often , aparently i am good at it.

say i appologize, i have fallen in love with the rifle after i finished the mod. you can youtube AEA HP STANDARD CUSTOM EDITION .25 bolt mod the last word, and there is a short video of this rifle and me showing what the mod does. i had someone almost buy the rifle today and i about cried, i cant part with it. this is my permanemt light weight air rifle. 50fpe all day long even after it goes off the reg. it went from 50fpe to 35fpe between the 53rd shot and the 70th shot. but stayed between 50 -54fpe for 53 shots, what more can i ask for in this type of rifle. and ive made it even quieter. no you can't have this one find my video and do the mod yourself on your own hp platform air gun. and thank me later...

This is brand new in the box. If you want to buy it I can open it and take some pictures. One Leaf paid me for a video by sending me this brand new NV100 clip on night vision, paired with thier daytime rifle scope. (Not the one I used for the video). The NV100 snaps onto the scope, so you can scan for targets with your hand held unit (it records too), and then when your ready to shoot, it snaps right on and off the scope.

You can also use the NV100 on any of your current scopes with included adapter. I can't post the video yet because OneLeaf ran out of them.

See it here: https://www.amazon.com/oneleaf-ai-Commander-NV100-Night-Vision/dp/B0B92VB7WH/ref=sr_1_1?crid=30E4YVVGPAFRX&keywords=oneleaf.ai+commander+nv100+plus&qid=1665732641&refresh=1&sprefix=oneleaf.ai+Commander+NV100,aps,516&sr=8-1

These are $499

Christmas Special: $399 + Free Shipping. Paypal OK Call or text me at 360-844-0962 or PM me here or email me at [email protected]. Thanks -Nate @ Airgun Channel

Urgently need an FX Dreamline fill probe. Thanks

[No trade offers on this listing please...]

Hello AGN,

I'm looking to sell a very nice Edgun Leshiy 2 0.22 Caliber 350mm Long Hi-Cap R.E.P.R. w/ 350cc CF bottle, original factory airtube, Stripling Custom 1/2UNF x 20 threaded adapter, upgraded long moderator insert, 2 black magazines, 2 mag holders/orings, 3 updated magnetic mag covers, 17mm extended locking pin, extra pucks/transfer ports, HUMA one-piece fill probe, REPR reg adjustment tool, owner's manual & original factory box.

This Leshiy 2 currently has the REPR regulator set at 100bar and is shooting the JSB 18.13g pellets at ~800fps through the 350mm Alfa Precision barrel with excellent accuracy; at this same setting, it would shoot the JSB 15.89g pellets at ~845-850fps. It has the 0.6 and 0.8 jets installed (which are optimal for the 0.22 caliber), although I can install most other jet combinations you want if you want something different. The dog bone and collar are not currently installed but will be included. The factory long moderator has the upgraded Russian baffle insert installed along with the Stripling Custom 1/2UNF x 20 threaded adapter to allow you to easily install any UNF thread moderator you want. As is, it is extremely quiet with this configuration without the need for an extra moderator - meaning you don't have to add any additional length to the factory setup. With a mod added, it is nearly silent.

Rifle is in excellent condition as shown in the photos; the factory long moderator, air tubes and butt stock have been carefully wrapped in an automotive grade carbon fiber vinyl wrap that looks great but can also be easily removed without any residue if you don't want it. The 350cc CF bottle is also wrapped in a heavy duty tubing that can also be removed as needed. This rifle holds air, cycles and otherwise functions perfectly. Serial # is 4643; this is from the good batch of Leshiy 2's that has the good nickel plating that doesn't chip or peel off like some other L2's had.

To summarize, this awesome L2 package comes with everything listed below:

• Upgraded Leshiy 2 350cc carbon fiber bottle (factory air tube included)
• Stripling Custom 1/2UNF x 20 threaded adapter (factory end cap included)
• Upgrade Russian long moderator baffle insert (factory insert included)
• REPR regulator adjustment tool
• 17mm extended locking pin
• 2 black 8 shot magazines
• 3 updated (easy to remove) magnetic magazine covers
• 2 black magazine holders / orings
• Huma one-piece fill probe w/ extra orings
• 3 extra transfer port / pucks
• Factory dog bone / collar
• Carbon fiber vinyl wrap on factory moderator, air tubes, buttstock & jack.k shroud (easily removeable if you don't want it)
• Owner's manual & original factory box

As configured with the 350cc bottle & REPR regulator, this would equate to the Leshiy 2 Long Hi-Cap (REPR) model that current sells for $2,770 from Edgunwest.com. Add in the other extra accessories, tax & shipping and you're getting well over $3,000 in value in this package.

Price here is FIRM at $2,100 $2,000 + 1/2 actual shipping (price adjusted to reflect exclusion of Quad Rail & jack.k shroud)

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here and dating back to the Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.

I have a MTC MAMBA ULTRA LITE 3-10×40 , in great condition. Asking 150 shipped TYD. Need more info, please let me know. Open to offers and trades.

I have a like new challenger big 9 took a deer with it now I'm selling it.. $500 + half shipping.. PayPal f&f

Walther LGV Speziale .177 cal in exceptional condition for an old rifle. It was overhauled with new original innards about 5 years ago & hardly used since. Shot today and works as it should, heavy thud and almost no recoil. Has the heavy barrel sleeve, sight risers and rear Anchuts sight in lieu of original. Gues this gun to be in 90 percent + condition. Blueing is almost perfect and the stock is in beautiful condition. $450 plus actual shipping cost. I accept Paypal F&F. Please contact me via email: [email protected]

These do not have the newer springs and therefore don’t cycle as well as they could. I sold my HPSS and still have these.

I’ll take $30.

I’m looking for a spare AF air tank, no valve just a bare tank.

I have 1 working Yong Heng compressor I believe they are clones. One runs fine and the other for spare for parts motor runs fine just wont build pressure. Includes extra oil and misc parts and filters. Selling because I bought a new compressor. $100 Pickup in Bluffton Ohio.

* Reduced price again to $200 *
* What a deal! What is he thinking?
--> Why keep it if I'll never actually use it?

Here are a few unused items left over after the rebuild of an Edgun Leshi y 2 last year. There is a briefly mounted for testing and then removed .30 cal 250mm Alfa Precision barrel, one new .30 cal L2 magazine still in the wrapper, a spare magazine cover plate, and a couple of full 150ct tins of .30 cal JSB pellets: one tin of 44.75 and one tin of 50.15 gn..

The asking price for the items shown is $200 and includes shipping within the US.
PayPal only, no counter offers or trades. I need to simplify my life with less things to work on, not more of them.

Thanks for looking.

Jpiperson2002

Updated 12/17/22