Sell or trade stock only for a HMX chassis stock (as new condition) the stock on this rifle is immaculate, almost to nice to use! If I keep this gun I will be changing disciplines so need the chassis. $400.00 PayPal,conus.

Got this some time back and it's been sitting on my shelf 95% of the time since. Comes as show with mounts, eye piece, charger and nice, zoomable IR light with mount.

This scope does the normal freezing up at times that it seems all ATN's do. I've not updated the bios in at least a year, likely longer so could benefit from that. Installed in the scope is a 32GB Micro SD card.

Not really interested in trades. $375 shipped for everything. Payment through MO, Paypal (FF or 3%, please).

Thanks for looking!

Hello AGN:

I have an FX Impact 0.25 transfer port (which could also work w/ the FX Crown, Maverick, Dreamline & Wildcat MkIII rifles) with an FX Impact 0.25 pellet probe left for sale. Everything else in the photos has already been sold so I'm selling the last transfer port and probe together as one combo.

Price is : $40 shipped for both the transfer port & pellet probe together.

I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

Brand new, just arrived today, but I bought the wrong thing!

My loss, your gain for $15 + $5 S&H

View attachment 20221219_181106.jpg

View attachment 20221219_181147.jpg

View attachment 20221219_181200.jpg

View attachment 20221219_181041.jpg

Up for grabs is one of my Favorite guns, I know i will kick myself for selling this one.

I got the 10m bug after getting a taste of it so I am listing a couple of guns to raise funds for my new 10m Competition gun.

The 1st up on the block is my beloved Huben K1 2021 Limited Edition in .25 cal
The gun is deadly accurate with both the 25.4gr and the 33.95gr pellets
One twist of the power knob, 1 turn between the 2 pellets and they are equally accurate, just depends on how bad you want to destroy the target.

The Most accurate results come by using the ZAN 33gr/ 2.14g, .253/6.41 cal Slugs with the power wheel set at 22 turns out. ( you want stupid power, you still have 18 more clicks out left on the wheel ! )

The gun is in Excellent condition, no, bumps or bruises, Never been abused, and only shot off the bench .

Gun comes with
Manual
Fill Probe
Complete spare oring kit
DonnyFL Thread adapter
Picatinny lower rail

Packed in the factory box then double boxed for safe travel

The Limited Edition guns Never come up for sale due to rarity
They are different from the standard version, not just the wood stock and carbon wrap tank and barrel. The barrel is a different " Select" barrel for the LE guns.

Asking 1800.00 includes shipping and insurance
Payment via paypal, F&F or add 3.5%
I can also do Credit Card add 3.5%

Scope, Scope Mounts, and Bipod are Not included

I have sold and bought Many guns here on AGN so buy with confidence.
I am open to phone conversations, Face Time if you have an apple device.

Delete old ad

Looking for a .22 Ranchero, synthetic or walnut doesn't matter

Have for sale a brand new, never out of the box Athlon Helos BTR Gen2 4-20x50 MOA. Got this for NRL22X and decided on going other direction on optics.

Price $449.99 PayPal FF, plus actual shipping to CONUSA.

Thanks for taking a look. Please PM with any questions.

This is a well cared for Air Arms S510 ultimate sporter extra FAC in walnut adjustable cheekpiece stock. No rings or scope included. It will ship in a hard case and include a male to male threaded adapter which allows the user to use any 1/2 UNF moderator of your choice. The rifle will also come with the factory threaded end cap. This rifle is a laser with 10.4 pellets at 980 fps without even needing to use highest power level. The wood is unmarked and the bluing is excellent with two minor touched up spots underneath the air cylinder.
This rifle has a factory regulator. No air leaks or issues. These sell new for $1,699. Sell for $1,000 plus $50 shipping. Prefer Paypal F&F or add 3.5%. Not looking for any trades. I will only sell to a buyer in the Contiguous 48 states. I have lots of seller references so buy with confidence. SOLD PENDING PAYMENT

Everything included except for the liner.
$150 shipped.

Looking to sell an 800mm 35 cal Impact barrel kit. The kit will come with the barrel, liner, moderator, magazine, and pellet probe. $300 Paypal F&F + half shipping west of the MS. This came off an M3 because at the time of purchase 700mm 25 cal M3 configurations were hard to find although the barrel kits were available. The M3 was immediately converted to 25 and was never fired as a 35 cal so this is in brand-new condition.

***SOLD***Steve Corcoran Custom walnut grips and forend for Crosman/Benjamin Pistols, fit Marauder/Crosman 1720T, 1701 Silhouette, all 13XX and 22XX pistols. $85.00 SHIPPED



TKO butt stock fits the above pistols. Threads right in NO adapters needed $55.00 SHIPPED

Ruger Blackhawk .177 Air rifle. Break barrel. With Hawke Vantage 2-7x32 AO scope, rings, box & manual.
$90 + shipping or free local pickup in Rhode Island, Massachusetts, Connecticut area.

This a Pitbull Carbine bulldog.357. With Pitbull steel charging handle, and bully tube. Trigger work by Pitbull. 3 mags, single shot tray. About 100 slugs included. Front Pic under rail. Excellent condition. Holds air 100%. $850 DOES NOT COME WITH MODERATOR, no longer have the moderator split shipping within CONTUS, Zelle or PayPal f/f (or add 3%)

Just as the title states, I'm looking for a couple .22cal Crown/Maverick/Dreamline/ Wildcat MK3 Magazines. Let me know what you've got and what you're asking for them.

Thanks!
Tom

Good condition don’t need. Asking $80 shipped.

Brand new never used, with extras listed below.
$225 OBO shipped.
200 OBO shipped.
$175 OBO shipped.

***EDIT- ALL ITEMS SOLD!!
Selling (2) Athlon ArGos BTR Gen2 10-40 x 56 Bench scope, which were sent back to me new under warranty. The two previous ones I had that I bought used here on the classifieds failed Athlons recoil test. They were the first Gen on these benchrest scopes as these new ones came back with a much larger parallax knob and are able to go as low as 10 yards on the parallax. I had to reorder new parallax knobs from MK to replace the smaller ones.

These scopes were mounted and lightly used, as one, I wanted to see if the change to new had fixed the problems I was having with the first Gen models(it did, as the parallax knobs are tighter and the groups were now very consistent) and two, I decided while awaiting for these to come back to slowly make the transition to 34mm scopes.

These scopes still have all the original packaging which includes the unused wrenches, instructions, zero stop bushing, an unused lens wipe, and unused scope covers.
See the specs here:

Here are pics-

The scopes will each come with the throw levers and parallax dial knobs for $400 each.

I also have two sets of 30mm picatinny FX no limits that are used a good percent as I had these on the two I sent back. They have stainless fasteners on them but if you desire the factory black screws I can switch them out. I use anti seize on my fasteners so even though I’ll clean them the best I can(if you wish), there will be small traces. These I’ll let go for $55 each.

The Wheeler anti cant levels if you buy them with the FX no limit rings I’ll sell them for $25 each, if you want them separately they are $30. These will come with stainless fasteners.
PayPal FF, or you pay the 3.5% fees for G&S.

Shipping is included in my prices, and will only ship to the USofA.
More pics-

Looking to buy a as close to perfect.. 177-22 .. TATZU .. from members with feedback only..thanks

[No trade offers on this listing please...]

Hello AGN,

I'm looking to sell a super nice FX Impact M3 Black Compact w/ 300cc bottle & 0.22 caliber 500mm barrel (Superior liner w/ carbon fiber barrel liner installed) w/ 1 high capacity magazine, FX stackable moderator, FX foster fitting, bottle clamp, stainless steel bolts, original sales receipt and factory FX hard case. I am the original owner of this Impact and bought it new from Baker Airguns; it has been one of the best shooters I've ever owned and my go-to rifle ever since I got it. It is insanely accurate and consistent and is currently set up to shoot the JSB 18.13g pellets through the 500mm Superior liner at ~880fps with the 2nd regulator only set at 85bar - so there's plenty of power to spare if you want more. At its current setting, the FX stackable mod is surprisingly effective and this rifle is already very, very quiet.

Rifle is in fantastic condition as shown in the photos; I mostly shoot from inside my home office and very occasionally walk around the backyard with it - meaning that it's never truly been in the field on any real hunt. It holds air and functions perfectly. I will include the original sales receipt from Baker Airguns and will be happy to assist in any warranty issues that might come up in the future (rifle has been perfect and had zero issues to date).

This beautiful M3 comes with the following upgrades / extras:

• FX factory stackable moderator
• Carbon fiber barrel liner
• Stainless steel bolt kit (already installed; original blacks screws will be included)
• 3D printed bottle clamp
• Carbon fiber vinyl wrap on shroud & cheek rest (easily removeable if you don't want it)
• Original Baker Airguns sales receipt

Price is $1850 + 1/2 actual shipping

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here and dating back to the Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.

I have 5 sealed tins, and one opened tin of H&N Grizzly slugs in .356 cal/9MM. 85 slugs per tin, and very close to that amount on the opened tin.

CONUS $30 + 8 S&H.

View attachment 20221218_164226.jpg
View attachment 20221218_164254.jpg

.25 armada and .25 marauder leakers/project guns. 550$ plus shipping. 2 new in package magazines. #118 o rings and some breech o rings. Armada has a bipod. I swapped the barrel on the armada with an older marauder barrel and the marauder is an older model both with green mtn barrels I believe but havent checked it to make sure.i think the marauder needs a gauge too. I took them out of the safe after they sat for a long while and they were empty so I'm selling them. Firm on the price.

SOLD..............