new hawke scope 2x7x32 sun shade and utg rings weaver base

Hi everyone, I am looking for a Wildcat MK3 Sniper or something similar (the bottle version is fine, Maverick, etc.)
Ultimately I am wanting a .22 caliber, but I understand that the barrels can be swapped out, so if you have one in a different caliber, or you are willing to sell one without a barrel, those are valid also options for me.
The main thing that I am looking for is something in .22, with a longer barrel being a big plus, because I am looking for a higher shot count and efficiency ( I use a hand pump to fill up).
If you have something that seems to check all of the boxes I mentioned, but is not something I listed, then feel free to send me a message, because I might be interested.

Thanks - Josh

west hunter 4x16x44 85$ shiped center point 4x16x50 75$ shiped

Scope has been in a safe for 20 years. Focuses down to 10 yards, and can be mounted on any springer/gas ram airgun. Optics are clear and scratch free. I never personally used it. Comes with spacer pins and red filter. Take off the filter, and the reticle turns white. Cover the port with a cover or tape, and it will turn black. Will ship in a USPS medium flat rate box insured for $22.50 ($16.10 + $6.40) CONUS. Buyer pays shipping charges. Paypal FF or Good and Services + 3.3%. Asking $325 + shipping.

new reg 3000 psi out put can be shimed to a difrent out put i bought it for my guanlet 2 30 cal reg presure is 2800 this one was 3000 next is a reg tester i payed 43$ just for the reg its self so 40$ shiped on both 40mm hawke sun shade 20$ shiped and set hawke 11mm base 1 inch tube rings sell with sun shade 30$ shiped

SHOOTS GREAT NSA 93, COMES WITH FILL PROBE EXTRA BRUST DISC EXTRA SLUGS, HOLDS AIR NICE TRIGGER POSTAL MO . CHECK . PP EXTRA 50$ $375.00 SHIPPED. I WILL NOT SHIP TO NO FLY ZONES USA ONLY THANKS FOR LOOKIN PAPERP PLEASE PM FOR EXTRA INFO or photos

COMES WITH 2 STOCKS 1 FILL PROBE.FACTORY BOX AND O RINGS . 2X7 BSA SCOPE & TACTICAL BAG?CASE !HOLDS AIR SHOOTS GREAT 275.00$ SHIPPED USA ONLY. POSTAL MO. CHECK PP ADD50$ I WILL NOT SHIP TO NO FLY STATES THANKS FOR LOOKIN PAPERP PLEASE P FOR EXTRA INFO

Looking for the above scope. Possibly another type of Athlon product. Prefer to stay in the FFP. thanks
JPW

WTB: Rapid Air Weapons.22 caliber magazine. I am needing 1-2 magazines for an older model HM1000 .22 caliber. I have had another ad that have resulted in 5) scammers trying to get my $.
P/M me with pictures and what you are asking for them. I will do PayPal and pay the extra 4.5% to send them as goods and services. I know I can buy new but trying to save a few $. If you have good feedback or have dealt with me before we can work something else out.

Selling my Vixen long 177. Gun is in excellent condition and super accurate. Has custom carbon shroud with a Tatsu moderator. I didn't do the work myself but looks factory and they did an excellent job. Only selling because I just received another one and don't need 2. Comes with 2 mags, Sekhmet gauge, fill probe in hard case $875 Shipped CONUS. PP FF or you pay fees. Call, text or PM if you need more info. Ed 520-965-7362View attachment 20220703_120938[1].jpgView attachment 20220703_121301[1].jpgView attachment 20220703_120948[1].jpg

$150 shipped.
Only comes with .25/.30 air stripper.
End cap is 1/2 UNF.

DonnyFL will sell a set of air strippers for $15 plus shipping if you need those.

Looking for a stock for my Crown MK2, what’s out there?

Selling one of a small production run of the steel version of the Whiscombe cocking linkage that was originally made as a cast part and subject to a catastrophic cracking failure. If it cracks the gun is no longer able to be cocked/fired. Original cast versions are no longer produced or available so a permanent steel version (much stronger) was designed and produced by one of our Whiscombe family of owners in a small quantity. Don’t miss out on this opportunity to protect your $5,000 gun and investment. This linkage fits all Whiscombe under lever cocking models. The part must be drilled to match your specific rifle’s measurement as each gun was hand built. Pricec $130 and includes shipping to lower 48. Don’t miss out as no more will be made. I accept USPS money orders.

I do not have a 22 pellet gun so no need to keep these pellets. Would like to sell as a bundle, not willing to separate at this time.

6 tins of JSB 25.4 redesigns
1 JSB 25.4 monster
1 JSB 33.9 Monster
1 FX 18s
1 JSB 18s
1 Hades
1 opened 1/2 tin of Barracuda extreme

$109 shipped lower 48, PayPal FF

- Greg.

looking for a used or extra donnyfl a77 adapter for my area hp

This is a new in box .22 cal semi auto carbine. Soon after I ordered it I received some health bad news and need to sell. I am asking $500. This is $100 less than it cost me ! I have original bill and box from Utah air guns. Please text me at +12817319528 , and I’ll call you back to discuss.

After months of thought, I have decided to sell my FX Impact MK2 30 Cal Sniper 700. Rifle was purchased from SPAW April 2021. I had plans to set the rifle up for large grain slugs for Coyote hunting but never got around to it and I am tired of the rifle just sitting around. Also, I have too many 30 Calibers, one that also shoot slugs but the hybrids only. As you can see the rifle is in fantastic new condition and has hardly been used. Maybe 1000 rounds fired through it total. Rifle hold air forever. I am a motivated seller, so I am listing for a great price in this market. Please be aware that the rifle is NOT tuned and will need to be by the buyer. Comes fully loaded, the list of extras is long.

2 barrel liners, one 1/18 heavy and one 1/22 (both new)

FX carbon sleeve in 700 (unbonded)

2 Huma regulators (one extra high pressure in rifle) and one brand new in package that is medium pressure.

Huma regulator rebuild kit

New design barrel clamp for rigidity from Airbuks (see pictures)

Two shroud clamps for more rigidity (one is black arts, which is brand new)

3 Huma Pin Probes

2 Huma Pellet Probes

K/L Probe carrier (stock carrier included)

910/Ernest Rowe burnt orange short cocking lever with Huma large handle

Saber Tactical Arca Rail with pic end Gen 2 with extended foster cap (stock rail included)

FX 580 CC bottle

Full Stainless-Steel Conversion (stock included)

Upgraded Wika 28mm gauges with covers

Huma Transfer Port (plus stock port that was reshaped by BigRagu)

2 Huma power spring kits (stock springs also included)

Extra barrel sleeve nut and TP housing

2 Neoprene bottle protectors

1 Huma foster fill

2 Huma 7.5-gram brass hammer weights

1 8.0-gram brass hammer weight

1 8.5-gram brass hammer weight (in rifle)

1 Red Ernest Rowe C1 Tool

2 Magazines with Orion red inserts

1 Red Speed Loader

1 Plano custom case.

Price is only $1425 shipped and insured to lower 48. PayPal FF for known members with at least 10 positive feedback and over 60 posts. If less than that, PayPal G&S at your expense. Sorry for the inconvenience this may cause.

Of course, I am willing to chat, please PM me for my number.

Looking for a lower-to-mid price range high-magnification field target scope (e.g. Falcon T50, Falcon X50, Big Nikko).

Thanks,

Antoni

Power tuned by Will Piatt. Comes with 8 custom machined mags to load NSA 55.5 slugs. Pic rail included. $400 shipped CONUS only. PP FF 1/2 shipping to Hi.

Chrony numbers:

NSA 55.5. Fill 200 bar

1 – 913 102.75 ft-lbs

2 – 913 102.75 ft-lbs

3 – 908 101.63 ft-lbs

4 – 913 102.75 ft-lbs

5 – 914 102.98 ft-lbs

I thought I would like the set up and upgrade from the simple Pard 007s, but I was wrong. Never used the scope, only took it out and played with the menu. Instantly realized the complexity isn’t for me. Decided to sell instead of storing it.

Scope comes with both the two piece and once piece mounts. Also comes with the Bluetooth ballistic range finders. Scope firmware is fully up to date.

Selling for the incredible value of $439 shipped/insured to lower 48, PayPal FF.

- Greg.

utg 4x16x50 mill dot i/r a/o 75$ next 3x12x42 mill dot side focus 75$

cleaning out some of the airgun items I am not using. Have a nice like new FX bottle for sale with valve. Date is 03/2020.

$150 shipped lower 48. PayPal FF

Thanks - Greg

I thank and each and everyone of you for your time in contacting me for the sale of my Airguns, most of them were sold for almost the original purchase price.

I know and understand everyone is always looking for a good deal, I did not feel like parting from them for less forty % offers, I am grateful there are individuals out there that value, the time and effort individuals like me put into buying and maintaining their Ariguns like new.

Until next time, good luck and good shooting!!!


I have to leave the US and will not be able to bring my Airguns with me, so I must sell them all. I have a nice variety of brands and mostly .177 and .22 Calibers.
A few are .25 Cal. I apologize for not replying to some of the previous messages, as I have had too many things going on plus all the packing and selling other house goods.
But I am here and ready to message back.

KalibrGun Kricket Mini Carabine .22 Cal. $1295.00
KalibrGun Kricket Bullpup, Custom But plate in .22 caliber. $1295.00 Ea.

KalibrGun Kricket Long Carabine .22 Cal. $1300.00
Vulcan Tactical .22 wood stock super accurate with upgraded sidelever. $1250.00. Includes thread adaptor.

Taipan Mutant Gen 1 .22 Caliber CZ Barrel, with a custom South African Zebra-wood stock, original stock will be shipped also. $1350.00

I have Two Redwolf Daystate .177 and .22 in Red Laminate wood, in box like new.
1st Gen. High-power both Rifles. $2250.00 Ea. Accessories shown in pictures are extra.

FX Impact MK I, super accurate and powerful, with different barrels, $2250.00 I will include the different caliber barrels probes and some ammo. .22 - .25 and also the custom long bottom rail.
All of my Ariguns guns are super accurate as I have been lucky with them, I had an issue with the FX Impact when I first got it, but they exchanged it and it is now a beast, it was recently re-sealed by an expert Airgun Smith.

FX Crown Blue Laminate Gen II, with probes barrels and magazines for two calibers like new. .22 - .25 $2195.00.
FX Royale 400 in Walnut Stock Gen 1 .22 also like new. $1350.00.

FX Royale 500 1st Gen. .25 Cal. Black Polymer $1050.00.

Two Brocock Compatto Gen 1 .177 rifle $775.00 and also a great little Brocock ELITE pistol also in .177. $395.00

FX Wildcats MK I, .22 & .25 $1250.00 EA. and an
FX Streamline Mk I, .177 in Grey Laminate. $1190.00

JK-Hann .22 like new only used once and it was stored. $625.00.
Hatsan BT65 .22 Caliber Polymer stock like new, only used once. $465.00.

Benjamin Marauder .177 . $395.00. in Original stock.

I also have several Scopes that I need to sell as well as, other Airgun-suppressors, mounts, and other shooting accessories.

All are rated for PCP Airgun use don't know about Springer-Airgun use.

Only serious offers please.
Best Offers please be considerate as these are like new Airguns that have very little to NO signs of wear.

Please contact me for more images and pricing.

Scope rings, carrying cases and other accessories are not included unless specified, or if you are interested please ask me and we can come to an arrangement.

PayPal + only friends/family, Money Order, or VENMO. Shipping and insurance extra (estimate can be given with zipcode).
I will reply ASAP.
Thanks for your time!

Looking for .20 cal ammo

New in box Air Venturi Rail Mount Spring compressor
Item # AV-A00012
Air Venturi Rail Lock Spring Compressor

Weighing in at only 1.5 lbs this spring compressor allows airgun smiths and tinkerers to disassemble their spring, or gas piston rifles anywhere they choose. The spring compressor mounts on any piston gun's scope rail, whether Dovetail, Weaver or Picatinny, and allows for the safe disassembly (relief of pre-load) of the gun, with no workbench setup needed. Never before has replacing broken springs, burned out piston seals or leaking gas rams been this simple! The Rail Lock Compressor is just one more example of Air Venturi's commitment to designing tools that reward airgunners who know their guns.

• Attaches to Dovetail/Weaver/Picatinny Rails
• Allows user to disassemble spring and gas piston guns for maintenance/repair
• Lightweight
• Works with just about any spring piston powered rifle or pistol
• Portable and compact - Just 9" long
• Precision Machined

$75.00 including shipping in the USA
shipped by USPS Priority mail ANYWHERE IN THE USA
Payment by MO, Check or PayPal.
Please PM me with any questions.