Selling these as a complete package- Marauder 22 cal. in a Craftmans vit stock and a Marauder 25 cal. in a Mad dog stock for $600 shipped in conus. Postal Money Order only, will ship UPS when check clears with tracking #.

Extra o-rings for both guns besides the ones in the pictures


25cal. Marauder in a Mad dog stock - 4 mags - single shot tray- degassing tool - assorted o-rings from crosman and caption o-ring - 25cal. sumo, drilled out a little oversized due to clipping. If I find the DFL 1/2x20 moderator adapter I'll send it also . Spare adjustment clip also but hard to see in the plastic bag.


22cal. marauder in craftmans vit stock-5 mags, the two with blue tape needs the internal spring adjusted up one hole, the other ones cycle good - degassing tool - printed check piece - oem shroud cap - DFL moderator adapture1/2 x 20. (Scope not included but will leave rings on) I took the fiber carbon wrap off of the air tube in which it took off some bluing on the air tube so it has been painted black fyi. This gun has NO SAFETY AGAIN NO SAFETY with this stock configuration -- see picture of action, it is on the gun but no linkage was supplied by stock producer

REAR Rest SOLD …
Front SOLD pending payment ...

HEAVY (steel) Randolph Machine front rest. I’m the original owner, all in GREAT condition, easily 9.5/10 condition. The great feature of these rests are the top cradle swivels so there is no torque or binding on your rifle as you index from side to side. The front rest has Randolph’s optional MK1 top which retails for $150 and front rest (without the top) retails for $900. Asking $900 for front with the MKI top. This includes shipping In the lower 48 states. Forms of payment accepted are PayPal (+3.5%) or USPS money order or personal check (after it clears).

Complete action less trigger group.

.45 Caliber Bushbuck Big Bore Air Rifle with ammo!
Fun Rifle! It's big and it's got a bang to it!
I picked this one up used a year or two ago and Immediately sent it to AoA to have a once over done on it. Just to make sure all was well with it. It got a clean bill of health and was sent back.
I used it once at the event in Utah. Otherwise, I only took it out a few times.
Comes with 4 bags of 365 grain (it's most accurate), a bag of 230 grain, box of Nelson, a box of Air Venturi Slugs, and a soft case!

$1345 shipped conus
Paypal F&F preferred.
Bipod not included

Anyone have one for a lowly aesthetics modder such as myself?

Sold...

AirMaks Caiman 25cal. No mags or fill probe. The safety is messed up and need to be fixed. $250 shipped with tracking, paypal Friends and family. It's need work, fires fine but safety is not working correctly and fires as you push safety in or out. Project toy

Air Venturi Avenger, 25cal. No mags. Can't find them... $160 shipped with tracking. Paypal friends and family​

Sold​

​

GRS top rail bi-pod, $280 shipped usps priority with tracking number, paypal friends and family​

Sold......

Zans 25cal 41gr slugs. 13 full boxes and one 1/2 box. $180 shipped usps priority with tracking. Paypal friends and family

Is magazine height an issue? Big Air 12 shot Notos mags are shorter than Carm and easier to insert and remove due to extended cantilever!
Look how these Gen ll BA mags compare!

PINK!? Yes, there are other colors too! I have 4 of these babies left for those that want a softer look.

Almost new Innorel Tripod and Fanaue Adjustable saddle. (SOLD)

Innorel PW70 Mini Tripod. The tripod is adjustable from 5.5 in to 10.2 inches in height and the legs spread to a 17 inche circle at the lowest setting. Has both 3/8 and ¼ inch screws for mounting a variety of equipment.

Fanaue GS-01 Arca Swiss Rifle Saddle, T6061 Aluminum CNC machined with Class III hard annodized finish. The saddle is large enough to grip a 580cc bottle as well as most rifle stocks.

These are near new and I am asking $60 for the combination TYD. PayPal FF preferred.


Saber Tactical Monopod Bench Version with adapter for your rifle. (Sold - Awaiting funds)

• Stainless Steel Precision lead screw for smooth micro adjustments
• Other metals are aluminum 6061 T6
• Rubber bottom for extra grip
• No need to loosen knobs for adjusting
• Detach and attach mono-pod to adapter by sliding the mono-pod in.
• Strong magnets help keep it secure
• Ball joint near the base allows you to cant

Asking $130 TYD. PayPal FF preferred.

Don’t wait until you lose yours.
$20 PP USPS Priority Mail.


Q

CAP tuned Seneca Recluse .357. Shoots great, no leaks. Shoots come cast NOE 84gr hollow points great as well as FX hybrid slugs. Was told it shoots heavy NSA slugs as well. The rifle will come with an ATN 4K pro 3-14x scope, eagle vision adjustable scope rings, IR light, DonnyFL ronin with QD setup, 11 full boxes of FX hybrid slugs and 1 partial, and the NOE slug mold. $1200 shipped to the lower 48. Not interested in trades

Looking for a factory Maverick Chassis, with the top rail.

Hoping to find someone who's upgraded to a K&L Chassis and no longer needs the stock/top railcomponents.

I'd like to keep it around $150, as the last one listed on here was sold at $170 with the K&L top rail AND the factory top rail in good condition so I'd be hard pressed to pay more than that + shipping.

I'm looking for a FX Panthera/Dynamic 500mm barrel kit, or pieces to make it work.
So I recently bought 30 cal Panthera Hunter , and it is amazing.. Shot fx 44.8 pellets absolutely spot on.. So I wanted to see if what I could get for power out of it in 700mm so I sourced the xl plenum and a 700mm barrel kit.. It's a power house and I love the power.. But!! !!!! I absolutely hate the length. This thing is loud and proud without the moderator on it and it makes it that much longer and I hate it. so I want to knock it down to a 500mm.. I want more power then I can get from my 395 barrel . I think a 500mm setup is the way to go for me as I want it to shoot RMR slugs.
If any of u can help that would be Amazing. Couple before and after photos from turning it to 700mm
Thanks in a advance. TonyP

looking for a HW80/R1 piston For some testing. Any extra parts I’m interested. Old barrels don’t care if rusted

As stated. I need a new style cocking shoe for a HW 80/R1.

Sirs.

I’m looking to buy a .20cal pcp, max budget $800 shipped if you have one for sale please let me know.

Thanks for watching.

Everything you need to transform your Leshiy 2 to bloodthirsty!!! 200.00 takes it all!

Looking for a Delta Wolf in 22 or 25. Would be great to have the newer Ultra Valve, but not required.

All sold. Thx.

$75 EACH shipped in lower 48. PayPal or MO. That’s oil on the first mag and It’s NOT scratched up. All in great condition.

SOLD - $25 shipped in lower 48.

I've sold all of my .25 stuff but have some projectiles left over.

1 overstuffed tin of JSB King heavy 33.95gr pellets

1 overstuffed tin of JSB Hades 26.54 gr pellets

1 pretty full tin of H&N Barracuda 30.86gr pellets

1 bag (300) of flanigans 47gr slugs

1 full box of Zan 35gr slugs

1 small random bag of 39grn slugs

Well over 1100 total

Looking for $75 shipped

33O-6I2-II8O is my number to text with any questions

200.00 shipped comes with box, sunshade, factory wheel.

Very rare Webley Mk1 rifle. Webley’s first rifle.
I’m offering it here first. It shoots with a weak spring. More of a collector piece than a shooter. Small cracks in the stock behind the trigger guard and toe of stock. Stilll solid. Stock is tight.
$700
Shipped from 17011 about 9 lbs
3 1/2 x 9 x 36”
Thank you