Jack.K +1 good seller!

HTO36C 11mm dovetail rings. Never opened. 
$25 shipped CONUS. Paypal only. Thanks

JWM8898 is a great seller, great info, prompt shipping. Would buy from him again !!!

1fastsnake was an excellent buyer, fast payment and good communication

Thank you sir

Easy to deal with. Item exactly as described. Thanks Randy.

Came into some hard times lately and need to sell off most of my collection. 
With much hesitation, I’m going to sell my wildcat .25 mk2. This was my first high end pcp, and I’ve looked after it meticulously since the day I got it. 
I had this rifle gone through by no other than Augie (bigragu) aka the wildcat guru, and it’s got some serious power for a wildcat. Between the huma reg at 165bar, the huma high power kit, the factory tp opened up, and a polished and carbon sleeved superior standard liner, it’s shooting 34 grain jsb’s at 960fps, or hades at 1030fps. It’s laser with both as well as the jsb knockouts. That’s all I’ve tried through it, but it’s not pellet picky at all. 


it’ll come in the factory hard case with fill probe, 4 mags, 4 mag holders mounted to scope rail, huma dual transfer port (not installled bc Augie’s ported tp worked better), and I’ll throw in the Ernest power plenum extension (it has the huma xl plenum already installed). 


Please pm me for pics or more info. I’m sure I’m missing something, but this has been my baby for the 2+ years I’ve owned it. There’s not a scratch on it, and it’s always had scba breathing quality air put in it. 

paypal only for payment, F&F or you add the PayPal fees



asking $1200 including scope and shipping to conus. $1000 without scope.

The scope is an Aztec optics 5.5-25 FFP

thanks for looking,

pm me for a full list of modifications done to rifle



Andy. 

I hate to do this, but funds are quickly needed, and I have to let go of most of my collection. This is a mk2 impact .30 with 700mm barrel and slug A liner with epoxied carbon fiber sleeve. It was gone through by Augie (bigragu) and all seals were replaced, the reg was rebuilt, and all fasteners were replaced with stainless. Some are torx to replace the Allen’s in places where they are often loosened or tightened for service or barrel removal. I then had the new 720pp kit from the M3 installed on it along with the slug power kit, a custom made brass hammer weight, and 16 position M3 power wheel. The barrel has a new dual transfer port and the barrel was thoroughly cleaned and polished. The Burt stock is a custom 3D printed version with a built in monopod, and it has the saber extended arca rail and smw engineering barrel clamp to help with ridgidity. 
the pellet probe (I shoot mainly pellets and hybrid slugs) is installed in a Kraford and Lypt probe holder, and the cocking arm has a custom handle installed. 
if you know Augie, you know what he’s capable of, and this gun shoots 44 grain jsbs at 960fps, and they’re basically hole in hole at 45yds. I haven’t gone farther than that, so I couldn’t tell you any more. The reg holds solid at pressure, and deviation between shots would make you think it has dual Regs!

now for the tough part. I’m asking $1800 for this rifle,and it will come with 2 Orion mags, 1 factory “small” mag, Donny fl ronin, hard case, and any extras that Augie sent it back with. I can include the scope for and additional $200. It’s an athlon midas tac 4-16 and it’s superior glass to any similarly priced scopes I’ve used. Not to mention their no questions asked warranty. Please know that a lot of love and attention went into this rifle, but I’m not the original owner, and while Augieworks magic on the internals, there are small blemishes on the outside that show it’s age. It in no way takes away from the operation of the rifle, but if you want a prestine looking impact, this isn’t for you. 


please contact me through messenger if you have any more questions, or want more pics. I’m 100% transparent, and I’m not the kind that will get annoyed with offers (how can I say no if you don’t offer?). 


thanks for looking,



Andy. 





p.s I will include 2 tins of .30 hades, and the large selection of slugs I was sent to test by various members on this forum. 

Executed a successful trade with him. Good communication. He shipped promptly. Items arrived as described. Bullet proof packaging. Deal with confidence. 

Just testing the waters....

If you want to sell your non-leaking .22 Maximus or Gen 2 Fortitude, shoot me a PM. I'll pay a good price for a good one. 

Mike

These 300bar valves available for all guns with m18x1.5 threads $85 shipped. 300 bar bottles are also available in 700cc for $220 shipped and 580cc for $190 shipped.

60.00 shipped 

In excellent condition with an extra end cap. I can remove the para cord wrap if need. Not hiding anything it’s just for camo. The end caps are 1/2x20 and the M20x1 for the Impact.

$150.00 with end cap of your choice….shipped 

Angel…

5 full tins

$90.00 shipped 

Angel..

727-692-2577

Hi All,

Like new Athlon Argos 6-24x50 Gen 2 FFP scope. MIL reticle.

In great shape and came with a gun I purchased but going more compact.

Ships in original box with sun shade.

285.00 shipped 

Hi All,

As the title states....Saber Tactical 60mm bottle clamp pic rail...

50.00 shipped.

Barracudas 18. I have 17 new tins

$115.00 shipped 

Angel..

727-692-2577

Great buyer, quick pay, great communication throughout the process

Beautiful FX Boss in walnut stock....Stock and gun show as new and had a complete reseal etc. from AoA.

Bought for my son but a bit long for him. Shoits lights out and would be hard pressed to find a nicer example.

1 mag/DonnyFL adapter included.

900 shipped. PayPal only for pmt.

DonnyFL Sumo. Great condition. Opening in the end measures 0.37. I’m assuming it’s for a .30 cal. $125 or trade for JSB .30/.25/.22 pellets.

For sale - BNIB Tenebraex flip covers (UAC015-FCR Ocular, and 56NFCC-FCR Objective) and MK Machining Parallax Wheel for Athlon Cronus BTR GEN2 UHD 4.5-29×56

Purchased these new, and I never had a chance to use them. Reason for selling is I was forced into returning the scope, and I will not be receiving a replacement. The covers might fit other scopes (and most likely fit the GEN1 Cronus, as there is no distinction made on Tenebraex's description on their website) but, the parallax adjuster will not fit anything but the GEN2 Cronus, according to an email response I received from MK Machining.

The flip covers list new at $57.99 each, plus shipping. The parallax adjuster lists new at $19.99 each, plus shipping. Asking $120 for everything together, shipped (shipped to lower 48 US states only). Paypal goods and services. Not interested in trades. Not interested in separating, unless I get individual buyers for each. Payment by Paypal goods and services is preferred. However, I will also accept a US postal money order, or a check, but these will have to clear before I ship.

This is listed on AGN only. If you see it anywhere else, it's a scam. Please PM me here with any questions. If you prefer, I will provide you with my cell phone number if you request it. I do have email notification set up for when I receive PM's (hopefully it's working).

Unfortunately, I have no feedback here that I am aware of (as I have not bought anything on here, and I've only sold a few items: a Gamo rifle, a barrel band, and an air stripper). For the sake of establishing some credibility....the screen name I use on here (for 2.5+ years now) is my screen name on GTA, The AirGun Guild, Dootalk, and ebay.

Thanks for the space, AGN.

Looking for Kral fill valve with gauge in it. The puncher breaker uses this valve, I’m sure some of their other models do as well. Looks like this. Thank you

Beau

(918)508-9192

Figured put it won’t work for what I’m trying to do. Thanks SteveKralsAround saved me some money.

No more worrying about snapping magazine holder O-ring on your Leshiy 2 magazine holder. This magazine holder stores your extra Leshiy 2 magazine right under the scope rail with a strong N52 grade magnet. The magnet has over 3 lbs of pull force. The magazine holder can be installed in under 5 minutes.

See video for details.

$20 each. Shipping to USA included 

PayPal F&F or add 3.5% for fees

PM or email me if interested

[email protected]


https://youtu.be/uUknCZOsDI8

This barrel band will stop the LDC from resting on your tank. Fits any length ZEUS .72 caliber. This barrel band is precision! Fits tight and stays put. This will give you the perfect amount of clearance for your Donny FL Great Kami LDC and gives you a concentric gap from one end of your barrel to the other. This holds your barrel firmly in place, secured to your tank. Made of high strength PLA. 

Price: $29.00 free shipping. Ships the same day you order via 2-3 day USPS First Class Mail. Paypal OK, or check/Money Order. You can PM me here, email me at [email protected] or call or text me at 360-844-0962 Thanks -Nate 

Selling a fx factory.22 magazine. Sell for $35 shipped PayPal message me 828-455-4459

Bought an optics package from Mike, he’s an excellent communicator, packaged the delicate items very well, and communicated the shipment to me superbly. Thanks Mike and thanks AGN.