Sold as a set. $75 shipped, PayPal gift or + 3.5%

Comes with bubble level and case. Case is from 34mm rings but it does what it needs to do. $80 shipped PayPal gift or + 3.5%.

.25 - .177 cal DonnyFL Shogun (gen1). 1/2 UNF thread. $155 shipped PayPal gift or +3.5% for goods/services

used but like new weaver base 30mm tube 

seamless transaction 

 

SOLD I have four complete tins (500 pellet tins) of .22 CPHP. I will also include a tin that is about 1/3 full.

Three of the four complete tins are still in the original wrapping.

36.00 shipped to lower 48 or trade for equivalent value in JSB 18.1 gr.

Text me at 405-664-4695 if you are interested or want pictures. I have several transactions on this forum.

Bought this for the wife to try out, but she still likes her bipod better. Leofoto LS223C bipod with a 52mm metal Artcise ball, Picatinny rail to ARCA swiss, plus an additional quick disconnect set up. It will be shipped in original boxes with original nylon cases.

Everything for $180.00 shipped paypal F&F

After much debate I decided I need to thin the herd a little. I haven’t shot the PP700 much, as much as I love the little gun I still prefer my OG crosman guns but I have way too much overlap anyways. 


PP700 177 cal with donnyFL moderator adapter, folding carbine stock, upgraded stainless 4 oring fill probe and 3D printed moderator. It needs a retune right now since it’s dialed way down to around 500fps. Can’t find the rear open sight, I took it off because it was interfering with scopes. I dremeled the regulator adjustment hole a little bit still better to take out the reg and adjust…..SOLD!





Stained wood carbine stock for the pp700, has a very small hairline crack by the grip and trigger but doesn’t affect it in anyway I can tell and probably there when I bought it. It won’t show up on camer/picture, stock works just fine and no one can tell unless I show it to you…….60 shipped. 



$250 for the lot, paypal FF or add 3%

2 un opened tin one tin 3/4 full then the slugs 55$ buyer pays shiping 

I had the pleasure to deal with this member and it was easy as all things should be, thank you for leaving feedback for me, until next time. Jim 

Mint condition with three magazines, bag rider/rear support, blue laminated wood grip and cheek rest, KeyMod Pic rail for bipod, all OEM bits including degasser, IB, probe, etc. Works perfectly, no leaks, very consistent and accurate. No cosmetic issues other than slight marks on Pic rail from scope. Summer 2021 new purchase from Utah Airguns. Updated v.2 tight folding stock with magazine storage, adjustable LOP and cheek riser. 30" open, 20.5" fits in Eberlestock Cherry Bomb. Baffled shroud with threaded end cap ready for standard moderator. Beautiful lightweight hunting gun, see video reviews on this site. Extensive feedback here and Yellow (ebay and other places too) and cash in person welcome, I am near Rochester, NY. Please no trades, lowballers blocked. Thanks

$1150 net to me after fees and shipping



~~~

This is a hard to find Dot Four not to be confused with the Dot 2 all over the internet including ebay. This is lightly used and includes a set of dovetail rings and a set of picatinny rings. Original box, polarizing filters for bright days, lens covers, allen wrench and instructions are included.

 Designed for competition shooting by Camp Perry champions, the Matchdot has become legendary in the bullseye community for it's accuracy, durability and quality construction. It features 4 dot sizes: 2, 4, 6 and 8 MOA and a click adjustable brightness control. At only 4.8 oz it is light enough for handgun use.

Specifications and Features:
Tube diameter: 30mm
Field of view: unlimited
Reticle: 2, 4, 6, and 8 MOA dot
Click adjustment: 1 MOA
Dot brightness adjustment: 11 levels
Eye relief: unlimited
Parallax free at 50 meters
Battery: 3V lithium CR2032
Battery life: 20 to 4000 hours
Overall length: 5.1"
Weight: 4.8 oz
Matte black and silver

I paid over $300 for this unit. The cheapest place I could find one yesterday on the internet was $299 at Cheaper Than Dirt.

My price is $165 including shipping to conus. Prefer paypal +3% but will discuss other forms of payment. No trades at this time. I have over 12 pages of feedback on the old yellow boi so buy with confidence. Kevin klentz4 “AT” comcast.net

I’ve never been a huge fan of the Leapers/UTG scopes but was greatly impressed by this scope. Bought it new and paid over $300. It sat on my pcp pesting gun all of its life.

Here’s some additional info for those not familiar:

Leapers has announced a new scope that’s suitable for use on air rifles, including high power spring/piston and gas ram models. This new Leapers product is the UTG T8 2-16X44 CQB/MRC IE Scope. “T8” represents an 8X zoom ratio which is cutting edge technology in optics.

The UTG T8 2-16X44 CQB/MRC IE scope is claimed to maximize optical performance at any range. You can use low power for close range shooting, medium power for intermediate distances, and high power for extended long range shots. The side parallax adjustment knob allows you to eliminate parallax down to as close as 10 yards – another benefit for use for use on air rifles.

Leapers’ True Strength (TS) Platform provides bracing against forward recoil – this is what makes the UTG T8 2-16X44 CQB/MRC IE scope suitable for use on break barrel air rifles. It is also completely sealed and 100% nitrogen filled, making it shock, fog, and rain proof.

The UTG T8 2-16X44 CQB/MRC IE scope is built with what Leapers describes as a Smart Spherical Structure (TS Platform) to control inner/outer tube interaction. This structure adds durability to the scope allowing for precise and consistent windage/elevation adjustment throughout its lifespan.

This T8 scope also has premium lockable and resettable turrets for fast and intuitive zero adjustment and retention. Its 30mm main tube offers a bright view and maximum turret adjustment range. There’s an etched glass reticle and emerald coated lenses.

As a bonus, this scope also includes an integral angled sunshade, flip-open lens cap, and Max Strength QD Weaver/Picatinny rings. Most air rifles will require “traditional” airgun/22 scope rings to use this scope on their guns, this would be an additional cost purchase.

The UTG T8 2-16X44 CQB/MRC IE scope carries the Leapers Item Number SCP3-216AOIEW and has a MSRP of $299.97.

Included are a set of dovetail rings, front flip-open lens cap and a UTG sidewheel. My price is $150 which includes shipping costs to conus. Prefer paypal + 3% but will consider other forms of payment. Kevin- klentz4 “AT” comcast.net

***SOLD***Factory FX stackable moderator / LDC that will work up to 30 caliber.

It has 1/2" X20 threads and a 5" total length,1 3/8" diameter.

Price: $70.00 shipped.

Pay pal Friends & Family preferred, otherwise please cover the fees. I'll cover shipping to CONUS.

Great deal on a Taipan Veteran Long (with extras!). No nonsense transaction and clear communication.

Good seller and easy to deal with. Well packaged and fair pricing. Thank you.

Good seller and easy to deal with. Went above by holding off shipment for a week. Was gone and he did it no issues. Well packaged, just like he was the one getting it. Great job and thank you.

Good seller and easy to work with. Packaging was like he was the one receiving it. Well done and thank you.

Looking for a RONIN or SHOGUN but will look at others.

For sales is an absolute mint condition Talon Tunes Airforce Condor SS in .25 caliber. Purchased directly from Tony in September 2018. This gun shoots lights out and packs a hard punch.

Shooting JSB Match Diablo EXACT KING .25 (25.39 grains) it averages about 876lbs for about 50 shots.

Tony performed the following on the gun:

1. Two set screws are installed and adjusted for the trigger to precisely control the first stage of Travel, and the amount of overtravel. This takes the trigger from the Factory’s stiff pull to a crisp and consistent pull for improved accuracy, control and feel.
2. The breech slide O-Rings are replaced with 90 Durometer o-rings and the breech slide and barrel are mated for smooth operation and a tight seal.
3. Barrel is polished where the breech o-rings ride.
4. Valve is disassembled, polished and ported for improved operation and air flow.
   [/LIST=1]
   
   
   
   Also Included:
   
   1.  AEON Scope: 6-24-50 SF
   2. TalonTunes Quad Rail
   3. TalonTunes Tank Adapter
   4. TalonTunes Custom Grip
   5. TalonTunes Gen.6 SOS Shroud/Sound Moderator 9 (never used!)
   6. Airforce Ring-Loc Valve Kit
      [/LIST=1]
      
      
      
      $1,100.00 via Paypal – 3% you pay the fee. Split shipping 50/50.
      
      
      
      

Dovetail mount. No spacer pins. Only mounts were sanded down. All original. No issues. Glass is clean. I never used it. Duplex reticle. Just another vintage scope that has been sitting in a safe for 20 years. No trades, third party, or international sales. Buyer pays actual shipping charges via insured UPS ground. 2lbs. 10”x5”x4”. Paypal FF or Good and Services + 3%. Asking $225 + shipping.

Pains me to sell this and Really love the looks of this stock however my hands are not big enough for the grip. This stock would be much better suited for someone with large hands.

The stock is in perfect condition with the exception of the holes drilled for pic rail. Holes have been filled with JB qwikwood. I have considered this into the price.

The stock would normally set you back nearly $700. I would like to sell it for $500 shipped CONUS.

Please PM me if interested.

Pay pal Friends and family please.

Thanks AGN.

Looking for 30cal molds , let me know what you have. Thanks 

6 new tins & 1 partial - Stoeger 200 count precision lead free 5.56 gr pellets. Shipped within the continental US. $90 via PayPal - net after fees.