Talon Tunes PCP Tank Adapter

1. Precision made
2. Black anodized, high quality
3. Pressure gauge on one side
4. One-way quick fill port on other side
5. M18x1.5 threads
6. Extends tank 2 inches

Asking $85.00 shipped
PayPal F&F

Selling a brand new in box Caldwell DeadShot FieldPod, $60 OBO

Located in Anaheim Hills CA

Looking to buy a notos that’s been bottle converted. Let me know what you have

Brand new Blackhound optics 6-24x50 first focal plane mil dot for sale or trade. Never mounted, brand new a comes with rings. Really great scope with amazing glass. Bought on impulse and realized later I don’t need a scope this powerful. Would consider trades for notos or similar, or 3x or 5x prism scope from immersive or others that have adjustable parallax. Or possibly a short lightweight 3-12 or 4-12 scope. Willing to add money on my end or yours for the right trade. Selling outright for $375 shipped

Hey All,

Anyone have a few tins of the DayState Howler .22 slugs they would part with?

Recently came into a Diana 45 that came without a stock. Looking for something to drop the action into. Thank you

Edit: I have been told there are a couple variations. I believe this is an older, non D34, variation. Im basing that on the trigger:

I have for sale an RTI Prophet Performance first version ,22 cal long range LW barrel . This barrel has the slow 30-1 twist rate and was designed to shoot pellets at very high velocities. I already have a 22 cal prophet and a bought a second one to converted to 25 cal so I don't need the barrel Price is $175 shipped

west hunter 4x16x50 1 inch tube mill dot a/o i/r 50$ shiped next is west hunter 3x12x44 ffp compact scope mill dot side focus 80$ shiped on it it cost 138$

Bought these molds for my Recluse/Challenger/Hercules airguns. This weight range runs the gamut for all 35 cal owners. This is the most economical avenue to see if your big bore prefers cast bullets. No wasted money with 90% full, dusty ammo boxes on the shelf. Good part is one of these slugs has to work! This sampler includes 10 different weights (20 each) and designs so you can determine what your gun likes best. L -> R in grains: 69, 91 (.356 only), 98, 114, 132, 137, 144, 145, 147, 184. No ammo shortages here, and no extra charge for Bee's wax lube either. I'd shoot two, three shot groups at 1/2 your zero distance, then three, three shot groups at your zero to confirm the winner. All the slugs I weighed were within .5 - 3 grains of each other. All slugs are lubed, sized, and slightly lubed again so they will fit in your magazines or breech. No trades, third party, or international sales. Will ship in a USPS small rate box @ $8.55. Each slug is approximately $0.49. Paypal FF/Good and Services (+3.3%)/Venmo. Asking $98 + shipping.

***FOUND*** I am looking for the following
1 or 2- Lelya .22 mag non aluminum

Buy or trade some .30 and .35 slugs and pellets pictured.

-----6/14/2024 : Sale Pending-----
LOWER PRICE. I'll accept $4500 in my pocket. Buyer to cover shipping, any insurance and payment fees.

---

Whiscombe JW80 MK2 with .177,.20,.22 barrels. $4500 plus any shipping/insurance

In nice condition. Please see all photos and judge for yourself. Stock has a few dings but hard to photograph. Still nice.
The .20 and ,22 barrels look good. The .177 barrel has numerous nicks in the outer shroud. Don't know why, that's how I got it.
The velocities are very uniform measured over my Competition Electronics chronograph. See notes last photo.
I am willing to ship and will package everything extra thoroughly.


Kris Rademacher
Monson, MA
(413)231-7455 text

I have a small stockpile of the original hand swaged NSA slugs in .30 that Nick Nielsen designed for the EDgun Matador and standard LW barrels. They were the absolute best slugs for the R5 that I owned so I bought a bunch of them. They also shoot well from FX slug and Heavy liners and they hit very hard in this original soft Corbin lead.

47gn - SOLD

50gn HP-CB - $90

• (5) full boxes 250ct
• (1) box ~15% full

60gn HP-CB -$145

• (4) full boxes 300ct
• (1) box ~90% full 300ct

66gn HP-DB - $125

• (4) full boxes 250ct
• (1) box ~50% full 250ct

Terms:

• If you want to buy everything, then I can do $350 if you use Zelle or $365 for PayPal (I'll also split the flat rate shipping)
• Zelle payment is preferred, add 3% for PayPal
• USPS flat rate shipping is about $14 CONUS for a Medium box and $20 for a Large box

47, 50, 60 grain..


66 grain (very similar to the 65.5, but the BC is higher and they just shoot better)

Im looking to purchase a Air Arms S410 or S510 preferably in .22
Thanks.

Good for compact setups with single or dual cylinders. $105 shipped CONUS

Bravo3d is making some aftermarket accessories for the Umarex Notos designed and made by Bravo3d. These are 3D printed with PETG making them strong and durable.
I will also be working on a larger capacity magazine.
Also if you have any ideas of accessories to make for the Notos please post here.

If you would like to stay updated on the accessories please post on here as I will be posting my designs on this this thread.

These handguards will fit any 32mm tube. I can also customize the handguard for any other tubes I would just change the diameter for the tube.

If you would like to pick on of these Foreamrs please check out www.bravo3d.com

Upgrade your AEA HP SS airgun with the new Handguard Made by Bravo3d. Add all your accessories with 7 Mlok rails. With its one-piece design, installation is effortless—simply slide it over the tank. Elevate your shooting experience by adding a flashlight or other accessories. Experience the perfect blend of strength, aesthetics, and functionality with Bravo3d products.

$39 + shipping.

3D printed and made of PETG Matte. This material is strong and has better heat resistance than PLA.

Made in the USA
www.bravo3d.com

41mm tube
6.5 inches long
2.1 inches wide
3.3. inches tall
5 oz weight

Like new. Works on at least the AGT Vulcan 1-2 regulators and Uragan 1. I think I used it to set an EVOL regulator, but I don't remember for sure if it was the Huma and / or factory EVOL reg.

$105 shipped CONUS

Geared towards the Texan/Hammer/Piledriver .510 owners. I own the Hammer/Piledriver and many other big bores, and decided to make my own. Since no one I know makes a pellet/slug sampler anymore, I decided to compile samplers without breaking your bank. .358/.401/.456/.580 will be coming next since I have guns in these calibers. This sampler includes five different weights and designs so you can determine what your gun likes best. In grains: 230/280/345/400/460. I'd shoot two, three shot groups at 1/2 your zero distance, then three, three shot groups at your zero to confirm the winner. All the slugs I weighed were within 5 - 6 grains of each other. All are lubed, sized, and slightly lubed again so they will fit in your magazines or breech. No extra cost for lubing either! No trades, third party, or international sales. Will ship in a USPS small rate box. Each slug is approximately $0.82. Paypal FF/Good and Services (+3.3%)/Venmo. Asking $70 shipped CONUS.

Hey guys I an testing the water on this to see what happens. I am looking at getting another rifle and that means one would have to go. So I am looking at letting go the Anschutz 8002 S2 that I had upgraded too shoot 12ftlb. I was able to find a higher powered regulator from Anschutz USA, and then talked with Tyler Pratner to do the work.

I took the stock while Tyler had the rifle and hydrodipped it myself. The stock under the graphics is the standard black and blue if I remember correctly. I shortened the bloop tube, as I didn't intend on using the sights. I made a carbon shroud that is ended in a 1/2×20 threads for anything you want on the end.

The rifle shoots like a dream, and with an addition to the muzzle the rifle is damn near silent.

The rifle will come with the rifle, a spare air cylinder, original centra sights, fill adapter and anschutz hard case.

Looking at another rifle so would like to see $1500 and can discuss shipping. Ok with PayPal or other methods that can be discussed. Any payment will have to clear before rifle gets shipped out.

Any questions just ask guys.

Hi All,

For sale is a loved FX Royale 500 .25…..

In my haste I purchased two of these, one wood and one synthetic and the synthetic fits the weather up here in the Pacific Northwest better so this one is in need of a new home.

Wood stock is in good shape, shroud has some love marks and barrel blueing has faded but gun holds air and functions as it should!

Includes 4 magazines

I am thinking 900 shipped…..Would consider a partial trade for a 700cc bottle for an FX Crown.

PayPal only for pmt.

Do let me know if you have any questions.

$1500.00 shipped, Huben K1 plus bug Buster 3-9 red and green Scope, partial tin of Baracuda 18 pellets. Purchased from KrazyCool in 2021 Gun is like new only shot a few times. Great gun very accurate will also include 10 cans (200) JSB Exact 25.39gr $15.00 value/can and 2 cans if H&N Barracuda 18 (200) a $160.00 value

Nice air bottle fits FX threads therefore fits FX bottle guns. Has valve installed. Includes fill adapter so you can fill tank when not on gun. See pictures for info on age, fill pressure etc. Asking 250 OBO Make it 150.00 and it's yours shipped to CONUS PP/FF preferred Call/text Ron 714-296-7489

New K&L Gigarail for the FX Maverick. Lots of rail space for NV and accessories, but it's a must have IME for optics that have a tight eye relief as it brings rail space further back.

Terms:

• $160 shipped CONUS only. Zelle (preferred) or $170 for discrete PayPal

If you have one that is just sitting there and don't know what to do with it I would be interested,
but bare in mind I am really not prepared to spend to much on it,.......I know, I know what a weird thing to say but I really do not need one it's just a rifle that I would like to have but if none come up I'll be alright not a big deal

Thanks

$400 shipped to maimi
Buy pcp let me see