If you want a inexpensive setup to shoot .22 in your Delta Wolf here ya go. It is a 600mm impact kit that has had the rear oring groove filled and the whole thing turned to fit the Delta. The pellet probe is a Huma wildcat that has been cut down and drilled and tapped. I have been using this same conversion process on a RTI barrel for a long time. The brass sleeve will slide up in the front barrel support if you want. Price is $400 shipped. Its $360 in parts alone. I have a few magazines in Carm and Daystate at additional price.

Another safe queen…LIKE NEW!!!!! Adjustable power variant. Yup holds air. Switch adjustable for higher or lower muzzle velocity. Did I mention…LIKE NEW. $150 plus 20 bucks for shipping.

Lovely stock no longer made in Thumbhole configuration in Blue Laminate. Has pic rail add and has no issues (scratches, cracks, dents) it does have wear from handling but was babied and shot indoors out. Asking $400 OBO shipped. PayPal. Getting pics now and will upload when I can until then message me. No trades. I also have a RAW HM1000x .30 Chassis I’d sell or maybe trade. I’ll be deciding which HW90/RX custom stock I’m going to sell/trade also if interested. For those near central VA I have 2 accurate gasram breakbarrels to sell but shipping will cost as much as the selling price probably so available for pickup or I’ll meet you if close…$100 each (Benj NP camo 22/ Hatsan .25) great accurate cheap shooters where my guest guns that just sit now PCPs take the shows. Thank you for looking and stay safe.



Keahi Lum Ho

I am selling my Challenger Bullpup .22 24" barrel Its a good rifle very accurate and powerful.

Selling cause I dont really shoot this one much and need the money for my filming business.

This rifle is setup right now to shoot 24.9gr NSA hp slugs at an average of 1060fps across 12 shots. Can get 24 shots per fill at this power level ranging from 1085fps – 1040fps. You can also adjust the power level to shoot lighter pellet's like 14.3gr at 880fps and get around 40 shots per fill.

I have installed a few small mods to the rifle. as you can see in the pictures I have added lower picatinny rails for either by pod or flash light, and sling studs . I have also installed a depinger and new baffles and barrel sleeve over the rear two parts of the barrel of my own design and 3d printed them. Baffles lower report 12db from stock baffles. The baffles have held up through over 1000 shots with zero issue. I also have 5 mags that sell for $25 each, however one has a busted spring. I have also polished and crowned the barrel.

There are a few scratches on the gun and the end of the moderator cap has a bit of a tear in it from a accidental double loading when I first got it. Still in very good shape. I have shot it to 120 yards and can hit the bottom of a soda can on the bench and taken Jacks out to 87 yards with head shots standing off hand.



Rifle: $459.00 https://www.thepelletshop.com/collections/aea-airguns/products/aea-challenger-series-bullpup-24-air-rifle

Magazines: $75 https://www.precisionairgunssupplies.com/collections/aea-accessories-and-parts/products/aea-challenger-22-cal-magazine

Sling studs: $10 https://www.amazon.com/dp/B07DC3K9R4/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B07DC3K9R4&pd_rd_w=OauEU&pf_rd_p=54ed5474-54a8-4c7f-a88a-45f748d18166&pd_rd_wg=bZ3vu&pf_rd_r=DA53JVAZ3HNV1ER2J7ZR&pd_rd_r=e9e1494c-b7d9-4365-9c69-48746ca4740c&s=sporting-goods&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExRUJSVkxYVzI1MTBRJmVuY3J5cHRlZElkPUEwNjM3MDE1VFE4TUVWUk1KRkdKJmVuY3J5cHRlZEFkSWQ9QTAwMzA2NjQyWEg0RTJFNVUzMldVJndpZGdldE5hbWU9c3BfZGV0YWlsX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Picatinny Rails: $6 https://www.amazon.com/FANGOSS-Picatinny-Aluminum-Section-Adapter/dp/B08RJ4LLJX/ref=sr_1_19_sspa?crid=1AKJWM5EI8JRM&keywords=screw+down+6+slot+picatinny+rail&qid=1643911166&sprefix=screw+down+6+slot+picatinny+rail%2Caps%2C95&sr=8-19-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFXRDJSODY3WEY3UEEmZW5jcnlwdGVkSWQ9QTEwNDEwODUyQTBNU0s3UjFVMlJOJmVuY3J5cHRlZEFkSWQ9QTA1Mjg0MzQyRzNKRTNJVEVYMlM4JndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Asking $450 gets you the rifle, shipping to lower 48, mags, and rifle only. No sling, scope or bipod.

Prices include shipping to lower 48 paypal friends and family. buyer pays Paypal fees if they dont want to do F&F. I have sold a rifle on here before and got good reviews for delivering exactly what was stated. 

Gun shipped in a hard case,is as described, would do business with again. Rick 

The famous and sought after Russian .177 target pistol…I’ve had it for years sittin' in safe. Just shot it 20 times with JSB 8.4's at 20 yards so incredibly accurate! Set up for red dot sight, no front or rear sight. $375 and 20 bucks for shipping. 

Time to move this one along, Arken SH4 Gen2 6-24x50 34mm tube MIL and will include Arken Flip Caps ($35 accessory purchased separately)

Only has two small cosmetic imperfections, pictures below. The scope functions perfectly. This is an excellent scope for the money and the turrets are unreal.

Asking $365 OBO shipped/PayPal'd, FF only, no trades at this time. 

Great transaction and fast payment. Great communication. 

Awesome Seller! Excellent Transaction! Excellent Item! Super Fast Shipping! Excellent Communication! Highly Recommend!

I am looking for trigger parts or broken evanix rex 357

To repair one cooking rod is broke will and cover shipping let me know what you have 804-543-8713 text me or message me thanks

I want to sell my ATN equipment. It's all brand new in original packaging. I've never used it and think it would be better off with someone who will. It was a gift and I've discounted it as low as I'm willing to go. The Bundle is worth around $1400 and I'm asking $895 for everything Shipped. PM me if you have questions or think

You might be interested.



. 



Thanks For Looking!

**Found! Thanks everyone for being so helpful!




Hello!

Im looking to buy a good condition Taipan Veteran Shorty .22 (preferably CZ barrel)

I keep missing the opportunities for the ones being posted lately.

Thanks in advance!

Simon

Milehigh is awesome to deal with. He was great at communication and he made sure that everything was wrapped perfectly! If he says what he has for sale is in good shape, it really means that it is immaculate! My new Hawk Scope looks brand new!

I hope to do business with milehigh again!



PG

RTI Priest 2 Performance in excellent in as close to new condition as a used gun can get. 0.177 caliber, has adjustable regulator, extended butt plate assembly with hammer spring adjustment, factory magazine and an aftermarket magazine (sorry, can't remember the make and the case is tucked away in the attic!), RTI hard plastic foam lined case, and paperwork that came with it.

Scope, rings and moderator are not included, but the moderator can be for an additional $100 bucks. It's a Donny FL Koi and it works great.

I also replaced the standard Magpul AR grip that came in the gun with a Houge grip that is a bit wider and more grippy.

The picatinny rail shows some light marks from scope mounting, and there is one spot in the anodizing where the cocking level comes into contact (see picture).

I currently have the reg set to around 90bar and the hammer spring screw flush with the butt plate. Have no idea what the velocity is because my chrony is broken, but it's nice and quiet and hits hard at 20 yards ony backyard range. Adjustments are as easy as turning exposed Allen screws - on on the reg and one for the hammer spring.

Only selling because I want to fund something else and this just never gets shot. Asking $1350 and I will split the cost of shipping and insurance within the CONUS. Add $100 if you want the moderator as well. PayPal friends and family or add 3.5% to cover fees. Will also take a USPS money order.

Please, please email directly if you are interested. tobinwebster at yahoo dot com

Black anodized aluminum side plate for FX Impact MKII or M3. laser engraved with signature "Powered by Huma-Air". You can replace the original FX side plate by just unscrewing the two small allen bolts. Listing price $20 shipped conus. I accept PayPal F&F or add 3.5%. Thank you！

Excellent Transaction! Excellent Communication! Super Fast Shipping!! Hope to do business with him again.

Daystate Huntsman Revere Walnut Minelli Stock taken off a late/current model Revere Regulated 177 rifle. This is the standard grade wood, it has mild signs of use (look at photos) without any dents, serious scratches, or any other rough stuff. I've photographed the worst below, it is not bad at all. Bolt, gauge and trigger holes all line up perfectly with my action and there is zero wobble and no issues, I am only selling because I bought a really nice one with superior wood. But this "standard" stock will still get compliments, it ain't bad at all. Please do your homework to make sure this will fit your version of the gun (I do not know whether they have changed over the years) as I do not want returns because "It doesn't fit". 

Will be carefully packaged and insured.

$175 net to me after shipping and PP fees

Leupold VX®-Freedom® 3-9x33mm EFR New in Box

Bought this then changed my mind and bought a longer scope. But I already have one on another gun and know they are great especially for springers and anytime you want clear quality glass, made in USA, high build quality and a simple, classic design. 

Still shrink wrapped and new. If you are truly buying it I can open it to confirm all is 100% but otherwise please don't ask me to open it if you're just another tire kicker mugwumper. Thanks

$320 shipped and PP'd

I have a R9 .22 barrel for sale, it have about 2 tins though it and in perfect condition. It'll come with open site front and rear.

$80 shipped.



Send text for pictures

Please pm me with offers. Dvor had great deal on them but i forgot to order one. 

Hi All,

Literally just took delivery of this RAW a couple days ago.

Thinking I had a .30 and .25 purchased a .22 well, I have a .25 AND .22 already so now have two .22 RAW that are EXACTLY the same so selling this one at a deep discount.

Factory fresh with new style moderator (Very backyard friendly) and one magazine, also have the DonnyFL adapter that will be included so you can run any moderator with 1/2 endcap. Installed a pic rail adapter as well on the lower MLok rail.

Gun has no signs of use etc.

1500 and will split the shipping and include a Plano hardcase as well.

Would trade for .30 PCP only 

I have a left handed TX200 in.22 that I would like to trade for a .177 either left or right will work for me. Action only I have a custom stock that I will be using on the .177

Please pm me if you have one or lnow where i can find one thanks

i got way too many......

$40 shipped to CONUS/ lower 48

paypal friends or add 4% for the fees.

thanks for look'n.....

SOLD----FX pellet liner 600mm .25 Caliber , Will include shroud but does NOT have end caps.

$75.00 SHIPPED.