60 ft lbs with 33 grain pellets. Ceramacote FDE paint job on stock and shroud. Gets 32 shots on 250 bar fill. Factory case and Huma regulator included. 4 mags--1 factory and three Carm.. 2 tins of MkII's. $1000 shipped CONUS. Bipod not included. Paypal friends/family to avoid fees accepted. 

 

5 tins JSB knock out slugs 25.39gr. .216 dia.$50.00 Conus, PayPal,plus $7.50 shipping 

Selling this hardly used ATN X-Sight HD that I purchased from a member here about a year ago. I just don't use it for racoons because a decent gun light works fine for me. Everything works fine with no issues. Includes everything in the photo: scope, IR illuminator, manual and soft bag.

$280 shipped in the lower 48.

Sweet gun here. Brand new and tuned ~ better than new!

In the Argus Kalibrgun has updated:
1) Shroud
2) Trigger
3) Hammer system
4) Magazine 
5) Non-choked barrel

Regulator is set to 102 bar and dialed it in for 33 FPE with the 18.13s. Very consistent and accurate. Fill to 300 bar and get 70 shots on a fill. Trigger is nice. Set for a light short first stage take-up to a crisp 12 ounce second stage break with zero creep. Comes with DonnyFL adapter to add 1/2-20 moderator. Very quite as is though. Comes with (2) 14 shot magazines, manual, fill probe and spare seals. Scope, mount, bipod and silencer not included. I will honor a full 1-year warranty for this PCP. 

$1,399.00 shipped. PayPal FF or add 3%. PM or email ~ [email protected]

Group pictured is 5-shots at 55 yards in some strongish winds. I

JSB Diabolo Exact Heavy .177 Cal, 10.34 Grains

Paid via PayPal bank transfer but never sent the shipping as agreed upon. That's not going to make or break me but plain & simple he didn't do what he agreed upon. 
One more reason I trust nobody until item is in hand. 

I acquired an FX barrel adapter for my taipan vet and it is doing fantastic. So I have no use for this CZ barrel currently and no plans to use it for anything else.

I shot hades out of it primarily and they did fantastic.

I will include the Taipan Vet Long shroud with it.

$225 shipped CONUS

Pay pal Only Friends and family only please.

PM Me if interested.

I had the pleasure of purchasing a rifle from and meeting with @Crusher (Bill) today. He was patient throughout the process, honest, and down to earth. He met me halfway and took time with me at the range to show me the gun’s functions and grouping. He even brought some pellets to allow me test the rifle and left me with some to hold me over until my order arrives. I had a good overall experience in our transaction. I believe that Bill is a trustworthy man and I would not hesitate to do business or shoot with him in the future. Buy with confidence. 

I've done a pellet swap with Larcat previously as well as another trade. Recently bought some pellets outright from him.

As per my previous experience with him everything was shipped quickly & packaged well. Deal with Larcat with confidence. 

I sold my .25 cal rifle so won't be needing these anymore. What you see is what you will get. The tins on the right are all full. The two tins on the left are opened and almost full. Packed in foam and bubble wrap. $100.00 shipped CONUS, PayPal friends and family or you pay the fees.

Selling my FX Bobcat 30 MK1 with Donny Ronin Moderator, This is a beast, but I love it for bench shooting, as it's rock solid and helps you get the one hole shots you like to see. I purchased this here on the forum, and a short time later had to send it in for a good going over by FX. There are NO Issues with this rifle. It does not come with a case, sorry, I'm good at packing and this would be double boxed. There are 2 magazines in the stock, and will include the rail mount for a bipod, does not include scope or rings. Pay Pal F&F or postal Money order, shipping is included lower 48 only. Asking $900.00 shipped. Thanks, please no trades. 

 

WTS: 2021 Huben K1 .22 Wood Stock Carbon Fiber Shroud Semi-Auto
Price: $1550 shipped CONUS.
Payment: PayPal F&F 
Email: [email protected]

Price includes everything below:

- (1) 2021 Huben K1 .22 Wood Stock Carbon Fiber Shroud Semi-Auto with Air Tube Gauge and bipod picatinny rail.
- (1) DonnyFL Huben K1 1/2 x 20 adapter for moderator
- (2) Quick Disconnect fill probes (newer grayish 2021 style).
- Original shroud endcap, hex keys and extra o-rings.
- Owner's Manual
- Original shipping carton and box.

Note: Scope and bipod not included, but could be purchased separately. 

I purchased this gorgeous 2021 Huben K1 .22 Wood Stock Carbon Fiber Shroud new in early May 2021 from Kelly Schmidt at Kraz Cool Airguns. I also had him install a bipod pic rail. The regulator, velocity, and trigger are externally adjustable, with the trigger set at 1 lbs 10 oz. 

The velocity adjuster is currently set to shoot FX/JSB Redesigned 25.4 and JSB 18.1 at around 930 fps. This semi-auto is very accurate and these settings are perfect for this gun.

This beautiful Huben K1 Wood semi-auto is in excellent condition. I don't hunt, and only backyard target shoot in good weather. As much as I appreciate the semi-auto action, it's really not necessary for target shooting. I never need a quick follow-up shot.

Full disclosure: The only issue I've noticed is a possible intermittent very slow leak. Meaning, I can go weeks without shooting, and the air gauge remains the same. Then, I can shoot and fill, and notice a 1-2 bar drop after 5-6 days. It could be temperature related or not, but I need to mention this.

If interested, email me at: [email protected]

any one wount to buy a 40 inch wide fx wild cat compact case i runing 600mm in stead of 500mm and i got to habe a longer case 

i looking for a 22 cal dream line probe to buy or even trade i got a 25 cal dream line probe and i got a maverick 22 probe 

I bought a scope from Daniel. He shipped right away and kept me up to speed.

Thanks!

CRAZY QUADRANT TARGET (2 Bullseyes) 

1/4 inch steel plates. The target measures 26 inches tall by 18 inches wide. Stand is 18 inches wide by 19 inches long

The large white panels are 6 inches square, The red zone is 3 inches square, The kill zone bullseye is 5/8th of an inch (by 1.5 inches long)

You can also shoot at the 12 bottom circles which are also 5/8th of an inch across. $199 + shipping. More info below: —->













This is one of the first things I ever welded together. Pretty crazy huh? I works as good as it looks. One of a kind and I don't plan to make any more of these. The shipping will likely be close to $50. The target comes off the base for easy storage or transport. Weighs probably 50 pounds. Best for 22LR powder burners, .25 magnum PCPs and .30 cal or higher air rifles. Can you hit a 1/2 inch target with your .30? Actually, that is about a 1 inch hole in the red zone, so a pellet going through there at all will give the top bullseye a good spin…even in .22. The red zone will also spin if you miss your MOA shot. …and all four 6 inch panels spin independently. Everything returns to it's original position due to gravity…100% of the time. Tons of fun and great for sighting in rifles. This is made, painted and ready to ship. This is that actual target for sale pictured here. 

Paypal OK, You can call or text me at 360-844-0962 or email me at [email protected] or PM me here. Thanks! -Nate 

Factory Parallax, sunshade, screw on covers. 

4" Sanders sidewheel goes on easily using a #8 Torx to remove the screw in the factory parallax knob & replacing it with the Sanders wheel.

The mildot reticle is NOT a true mildot but extremely useful for wind hold off in Field Target.

$1000 net to seller, shipped within CONUS. Outside CONUS will need to provide an address for which I can get a FEDEX quote.

Postal MO's of this size are difficult to cash at my rural PO. Will accept other forms of payment if the terms are reasonable. Paypal users must add the fees to the price if they want the Paypal coverage.

[email protected]

Please don't send a PM as I seldom check them.

Knobs

Looking to buy a small 4500 psi carbon fiber fill tank

Been wanting to try different pellets in my Feinwerkbau 124D and the JSB 7.87gr is next on my list. If anyone has some that they are willing to part with send me a PM.

Pays fast and honest.

Tatsu sold...........

1 .25cal DFL/FX in good condition, was $100...now--- $90 shipped conus

paypal friends or add 4% for the fees

listed on other sites so time stamp rules.

thanks for look'n.

dfl/fx on the right, tatsu on left has been sold.

10 like new but appears as new
I'll pay shipping and cover fees

If you need to video your shooting and need a filler light, this is a great bang for the bucks

Had 2 successful transaction here on AN so far

RHWilliams63, marlonlayton

VL-162T CRI95 + Movo VXR10 Video Microphone
Like new with boxes, never used. contact [email protected]

$65

Recently bought an Impact M3 compact, wanted a .22 but they only had a .25 in stock--- and since you can't be too picky if you want an M3 in a reasonable timeframe right now, I bought the .25 compact and am converting it to .22 rather than backordering a .22 compact and waiting who knows how long.

Included are all the factory M3 .25 500mm pieces: .25 500mm superior liner, dual port transfer port, muzzle and breech liner locks, pellet probe, and 28 round .25 magazine. Everything is brand new out of the box.

Willing to ship to HI or AK, but since it will be more expensive I'll have to get a shipping quote and figure out the difference. Payment via Paypal, USPS MO, or check (will ship when it clears.) Thanks!

Asking $225 shipped and insured for everything to the lower 48.

Liner and liner locks sold 10/30. Magazine and .25 probe still available.

Asking $70 shipped for 28 round .25 magazine and pellet probe

Asking $55 shipped for .25 magazine only

Asking $20 shipped for .25 pellet probe only

Looking to buy an FX impact M3 in .30 cal that is black. Looking to get into the slug liners but if it is stock set up for pellets that will work as well.