Yesterday Donald Southerland passed away. I really liked his acting. He was Great in "Kelly's Heros" and Many More. He will be Missed!

Been waiting for the right conditions to try the H&N 36gr out to 500yds.... this evening was it ....complete lack of wind going on dusk.

Plate is 10" dia...one mag of 28 shots... They perform very well .They really like being pushed 1060-1070 seems to be the sweet spot. just on 137moa of drop

......and again......this is with the Standard FX Liner ..

Hey guys

I'm a brand new owner of a Delta Wolf rifle and I love it. It shoots great. But I seem to be having some issues...

I've purchased a Huma moderator (0.22) for the Wolf (0.22= and I've noticed that it's not straight when screwed on (see the picture). Hence I get clipping and teribad accuracy. Then I've tried the FX moderator (0.22) and same results. Crooked mod and clipping.

I have even tried a 3d printed moderator (0.22) from my Flashpup. It works on the Pup but it also goes all over the place on the Wolf. I tried the 3d printed one to see if I would hear the pellet hitting the plastic but I can't. It doesn't rule out clipping though as the pellets go all over the place.

All the moderators work fine on all other rifles I've tried (Crown and Flashpup).
What can I do to remedy this? So far I'm 0 for 3.

The notion of only O-rings sealing your entire gun couldn't be farther from the truth. As an airgunsmith and Brand Ambassador for Benjamin Airguns this truly baffled me as to why customers were not offered the proper components to do the complete job all in one package. Transfer port seals and overmolded valve stems are exclusive to Crosman Corp and not found in most if not all kits on the internet. The addition of a complete NEW foster fitting also aids in worn out surfaces made by the ball detents and included sealant on threads. To make sure the customer does not accidently cut o-rings a gauge hole plug is also provided in every kit. The hole plug design was offered by Steven Archer some years ago and was a key component to performing the job flawlessly. All o-rings are in the kit including shroud, regulator equipped and all gun calibers. They are also MADE IN USA to be true - dash number rings and not metric cord sized to dash diameter. Marauder, Marauder pistol, Akela, Kratos and Cayden sets available now. Bulldog and others available soon @ airgunrevisions.com

All the best, AR

Hey All!

Parting with one of my Royale .22 with wood stock. Huma regulated set at 125 bar shooting both Hades (870) and 18.13 (835) laser accurate. Includes 2 magazines and Donny FL adapter. If you want a deadly silent squirrel thumper this is it!

Stock is in great shape as well as blueing on barrel.

Looking to trade for other high end PCP and will include cash on my end.

Pics to come.

Comes with new WestHunter 4-16x44 FFP scope w/ fast focus handle and Hajimoto Production 17rd mag. Leaks and I have too many other rifles to work on this one. $200 shipped PP F&F. Thanks!

So it was like 930 pm just not and wife took out daisy and whiskers to go to bathroom and a coyote ran up on them , I heard dogs bark and her yell , they came in and I grabbed thermal and saw 2 yotes litterly 20 feet from where puppies were , I yelled and threw a blaa at one they took off , However wife said one charged to get daisy the girl puppy , this is war , Latley we been being woken up by yotes in packs howling threw nites , I did not bother them but when they cross line to attack wife or dogs they crossed line , I snalled a few pics look here , tomarrow I mount thermal and will be ready if they want to battle ,
here is the puppies daisy and whiskers



Here is what attacked them

I am just coming back to airguns after being away for about 15 years, and I see that PCPs are evolved. Right before I left, I think FX Independence was all the rage. So where are we on pumpers? Anything FX-level quality? You think we'd have a 4-stage underbarrel pumps on some of those guns by now.

I am so happy to post this. I concieved of this when I saw the Edgun Lelya 2 and could literally feel myself holding it by just looking at pictures. Lelya 2 is the most beautiful of all the guns, imho.

I researched and researched til I landed on the Jet 1 in .25 as a simple enough donor gun, because God knows I'm not shelling out 1800 for a new Lelya. Ever. Bought 1 Jet, loved it, and bought a second instantly via Midway's sale on them in January for only 130 bucks new. Worth it.

The Jet stripped down lacks length so its not a full proper Leyla, thus I'm calling it the Lilya. Eat your hearts out. I f-ing love this thing more than most of you love your children, even without being able to shoot it yet. About that, he trigger relay rod will be utterly simple to install. Its all simple. I just couldn't wait anymore and grabbed a piece of junk wood and a chisel and went at it. Some cuts were initially made with a saw but I put maybe 8 hours of chisel carving into this. I'm not pro at that so it was learning. Started last night, woke up and finished today.

Holding it is a dream. I mean, I cut it to really fit my hand perfectly and it has lots of sanding yet, but the feel is precisely how I imagined. I will be finishing it and adding pics to this thread. Its far from complete but the Lilya has been born. Happy bday Lilya.

Prolly adding a butt extension, which will coincide with a rear install of a linear servo (tiny piston rod) that will cock then load the gun as a semi-auto. Battery powered semi auto, not blowback based. Yay, full power shots.

Like the title says I’m new to the springer game . What should I be looking for mainly looking to shoot target and varmints around the house

I have this bipod I will sale for 300. Sold

Had some time to go to that range, so i brought out my RAW and Epoch in .22 to test out AEA pellets at 50 yards
The epoch was set to shoot @ 885 fps and the RAW was set @ 930 fps using AEA 25.3g
Pellets are straight from the tin, no sorting.
I am not a professional, just an enthusiast with delussions of grandeur
On the Epoch, i have a 35" barrel. The RAW has a 24" cut-rifle barrel from Martin Rutterford( a custom order)
The Epoch was shot using a bipod and rear adjustable rest. The RAW used shooting bags.
Martin did the tune for the RAW, and i am fiddling with the Epoch(hits and misses-lots of misses- on the tune, and still working on it) A digital pressure gauge for the HP is highly recommended to dial in your tune.
It was close, but the Epoch won out this round. Slight advantage with the bench stability going to the Epoch
The triggers on these rifles are just ridiculously light...such a wonderful feeling when it starts to come together. I still have more work to do, but this was fun
Mike

Hello All!

Looking to do some trading….Letting go one of my MK2 Crowns.

.30 600mm barrel .25 700mm barrel, 580cc bottle, Kraford&Lypt KLS-M butt stock, 2 .30 magazines, 2 .25 magazines and .25 pellet probe….

Looking for:
RTI Prophet .22
Daystate Safari .25
RAW HM1000x .25
Skout .30
Kalibr Cricket Tactical .30
FX Boss/Bobcat MK2 .30
Or whatever else may tickle my fancy!

Five shots at 50 yards, Daystate Renegade .177 JSB’s 10.34 grain (No wind). Aiming at the upper tip of the cross.

PP700 in 20cal I had Brian Thurman build me from veradium air. Regulated gets about 12 good shoots per fill. Very accurate with 13.73s. It is EFT legal. 275 plus split shipping.

***TRADED***

Looking to trade my FX Wildcat MK3 .25 Compact. Comes with two magazines and 2 fill probes, has slings studs and small pic rail installed on the foregrip. Excellent condition. Scope not included.

Interested in :
Kalibrgun Cricket 2 Bullpup either .25 or .30
RTI Prophet 2 or P3 either .25 or .30
AGT Uragan 1 or 2 either .25 or .30

I was recently (very generously) gifted a bunch of targets, mostly steel. I got em all laid out to spray paint this morning and then the wind came up, a lot! So the painting is on hold but I'm super excited to get them spread out in the back pasture

But also in the milk crate was one of these.....


The semi-self healing type.

From those that have shot at this type before.....is there a certain fpe I need to stay over to prevent pellets from coming back at me and my boys? Or are these healing targets strictly rimfire?

Thanks in advance.

RTI Prophet 1 with their 22LR barrel. 1 rti mag,2 Orion mags, Rti bottom, JB3D3-d butthook and bag rider. Missing small screw for one of the face plates but I have a longer one that fits it just needs cut down. Love jsb RD 25.39
750 shipped. I have the RTI plastic case as well to ship it in

Title pretty much says it all.

I've never owned or used a scope over a few hundred bucks. I've bought a few of the cheapo CVlife FFPs on amazon recently with no obvious problems. What's the deal?

Edit: not really talking about nightvision scopes... for that the price makes a bit more sense.

Selling my FX pocket. Chronograph V1 in very good condition no box or accessories just what you see in the pictures 130 shipped

I was wondering if it is a problem if a airgun is send to Europe?
There are some nice second hand airguns that have my interrest and i was wondering if someone did send these to Europe.
In my case I live in Holland and we have no restrictions regarding airguns, so no caliber or power restrictions.

I did send some vintage airguns to the USA mostly HW55's and they did arrive fine.

my interrest goes to RAW, War type air rifles, they are nog common in Europe or the second hand marked is not large.

Hope someone has some advice.

After conducting a brief AGN search, I found that these rifles are mostly mentioned in the "Traditional Airguns" forum (though I'm not sure they're posting about the same guns as seen here Crosman Mendoza Springer Video ). I stumbled across a hunting video on YouTube of a hunter using a Mendoza .22 PCP to hunt what appears to have been javelina. Interesting looking rifles. Seems like the company has been around for a while. I don’t know where these rifles are made, but I suspect they're made in China, which is like many airguns on today's market. Anyhow, who is shooting a Mendoza PCP? Where did you buy it? Are there any Mexican or Central American AGN members using these rifles? I was specifically wondering if @Betohunter or @Emu are familiar with this company or these guns. If so, let us know about your experience with them. I wonder if this company ships to the United States. I also want to know how to convert their prices to USD. I assume these prices are in Mexican pesos.

Here is a lInk to their site

This one has a few scratches on it only the part that goes on the barrel, not the part that attaches to the moderator so 45 shipped to your door
now the moderator in the picture is a 22cal sumo if you have any questions just ask

Just talked to the local dive shop here in Michigan. He had two omega scba 45 min tanks that had been dropped off for hydro. He said that he found out no one in the state of Michigan can test them. For some reason they can’t be hydro tested. He said they had to be rolled and ultrasonic tested. I’m not positive but I believe he referred to them as ISO cylinders. He thought maybe it would be the case with all the China cylinders. Has anyone heard this before??

Filled the gun to 240 BAR, PW on minimum, regulator at 100 BAR sending CPHPs. Lots of plinking along with some targets over two days. Over 100 shots. Am three shots into the tenth magazine loaded… Just sent two this morning to confirm POI at 25 yards, then a piece of chalk the size of a chipmunks head at 64 yards…! Now off to work…