Hi,
Just finished EBR and headed to AoA to pickup a .30 caliber Ghost, first one sold retail i think and launching this week. Basically its interchangable with the Delta Wold, but all mechanical, no electronics. Will post first impressions this weekend, flying back to FL today. Jerry and Linda McGee are driving it back to Tampa along with their new .30 Delta Wolf. This was one of the guns used during EBR and Chris (from AoA) made it to final round with one. More to come.
Steve

I recently got a brand new RAW Chassis Rifle in .22. I’m shooting the JSB 25.39 grain pellets at an average of 940fps. I’m just setting at a solid table with the rifle on an Atlas Bipod. I’m not a competition shooter by any stretch. I plink and shoot birds. This is my best 10 shot group at 40 yards. I’m happy with it

1.- Recrown on the barrel of my Daystate Woverine HP HR. 25 Cal.

I decided to recrown the barrel of this rifle and the accuracy became insane at 100 yards.

2.- Made wider the entrance of the projectile to the barrel of my Bantam sniper.

I change the barrel to my Bantam Sniper HR. 25 Cal about two years ago.

When I tried the NSA Slugs on it, I notice that the last part of the travel to close the bolt was difficult and needed a little push.

I took off the barrel and with a drill, after removing the inside o'ring of the barrel, I made a wider entrance of the pellet/slug in order to get inside loose completly beyond the hole that receives the air at shooting. Then reinserted the o'ring.

Now the closing of the bolt with the pellet is butter smooth.

What is interesting is that the feeling at the shoot changed completly, now the shot feels to flow instead of the típical bang and recoil vibrating.

Accuracy remains perfect.

The talent at EBR this year was through the roof, and the competition was unbelievably stiff. Plus the conditions were typical Rio Salado, winds that never stayed the same direction or speed for more than a couple seconds.

With only a few exceptions, every previous EBR or RMAC winner and top five finishers over the past 5 years was at EBR competing! There was more talent at this match than any previous 100Y BR match in Airgun history….

Selling a 22 brocock commander XR .22
WTS/WTT for a bull pup..
Got in a trade.. shoots nicely and accurately
Shooting the 18th grain jsb @905fps on highest power setting
Shoots the 18 grain at about 780 fps on 2nd power setting
Shoots the 17.5 grain Nielsen slugs well too on hi power..
Comes with 3- magazines
Has folding stock
Has 580cc bottle for lots of shots..
Comes with original paperwork and box..
Asking 950 shipped lower 48 states
PayPal ff
Or trade for a nice bullpup..

600mm with 480cc carbon bottle with ergo tac grip and custom butt for monopod attachment. Come with 1 CARM mag, modified to hold 15 pellets. And some 150ish NSA slugs and 100ish Knockout pellets

also with:
Huma high(dual) flow transfer port
Huma tuning spring
Huma High flow probe and
Human 14.5g hammer.

This gun will shot moa at 100y with nsa 24.8 / .217 flying at 945ish fps. Barrel is standard superior. It also shoot 18.1 very accurate as well.
post: https://www.airgunnation.com/threads/my-first-100y.1259734/

First reg @ 165, 2nd reg @ 135.
PW 7 for nsa @945
PW 3 for 18.1 @930

Gun is in good condition.

For faster response: will be ship out from San Diego, welcome local pick up.
8fi8/876-tutu64

$1150 shipped
Paypal ff or +3.5%

Scope is NOT included. But I do have the below a open options:
Swfa 12x42 $200
Falcon menace ffp 4-14x44 $200

Been watching them as soon as they air. I'm assuming that repeated access not permitted. Right more wrong?
One of the reasons I ask..... new" Cricket semi . With adjustable reg, that should be a terror. Only in 22 now.

Hello everyone...im selling alot of airgun stuff ...it was all prepped to hopefully do real well at EBR ....unfortunately I drove from Ohio and when I got there I got bad news on my wife's grandma and went in and Saw Darren and Lauren...I explained I could not stay family comes first ..and the big hearts they have understood....I also wanted to make sure someone else on the waiting list could get a chance in this great event ....but there is always next year....I hope!!!!

OK now for goodies
1. .30 caliber RAW shoots lights out ...asking $1300 or reasonable offer.
2. Sold.... Pappas one piece benchrest asking $700 or reasonable offer.
3. Sold .... Sightron 10x50x60 PLR (PAID 1499 Right before EBR) asking $800 or reasonable offer.
4. SOLD PENDING FUNDS Sightron 8x32 bought also tight before EBR asking $600 or reasonable offer.
All reasonable offers will be excepted.
Paypal works for me
text me 513-748-7777 with any questions
again thank you

A big congratulations to Mike Bricker and Team Centercut on a great finish in the benchrest at EBR 2022!
Great shooting Mike.

Looking for a deal on a gently used NOTA. Text me if you have one available.
Joe P. (513)348-0014

I’ve been lamenting the lack of rats at the former dairy to my wife. She is currently illustrating a book on woodland rats. Joker that she is, she sent me this via a text.

I have a question for the Crosman CO2 pistol owners out there. I have a 2300S that I've shot 1300 pellets, a couple of weeks ago I noticed a very slight ticking/dripping noise coming from the tube there is no issues with the operation of the pistol it shoots very well. To hear the noise you must put the pistols tube up to your ear its that slight. I contacted Crosman and spoke to a tech and he said that's not normal and stated it might be too much oil. I put a drop of Pellgunoil on every cartridge as instructed per the instructions. The tech advised putting oil on every third cartridge. I've done as he recommended and I'm still hearing the sound . I don't understand what's causing the sound the pistol works fine. I asked the tech what would cause this sound since there is no pressure and he said either too much oil or the spring??. Is there still pressure inside the valve after you remove the cartridge? I wouldn't think so.. He said to send it in and they would check it, I really don't what to go through all that especially since the pistol is working fine. So for all you Crosman CO2 pistol especially the 2300S owners out there have you notice this slight sound coming from the tube after removing the cartridge?? You most likely would have to put the tube near your ear to hear it.

When you first remove the cartridge the tick/drip is about every 2 seconds. The crazy part is I would check it hours later and its still doing it however I would say its every 10 seconds and would progressively get longer between the tick/drip noise until it finally stops but can take up to 24 hours and then you don't hear it anymore. I know I'm being anal about it but inquiring minds what to know???

NightForce Br np-r2 8-32x56 scope in excellent condition, complete with screw-on lens covers, turret caps, sunshade and NF pic rings in worn box.
SFP, 30mm tube, IR Brenchrest scope made in Japan. $875 PayPal FnF or add fees. USPS tracked double boxed

**QD rings in pics NLA- will come with NF pic rings**
Thank you,
Keahi

Sub 12 fpe Air Arms MPR-FT in excellent condition. Bluing looks nearly new with some scuffs/scratches under the muzzle brake which is to be expected. Stock is 100%. No dings or scratches I can find.

Rifle has a Rowan Engineering polished cooking bolt and barrel band. The muzzle brake is an aluminum ldc made by Anthon Storey. Works great and is super slim. Also included I. The original AA muzzle brake and a couple of extra stock butt pad spacers.

This rifle has the standard S4xx/5xx AA trigger blade, and the trigger can be adjusted for travel, weight, etc.

Asking $700 plus 1/2 shipping costs. PayPal friends and family or USPS money order. Or, add 3.5% to total to cover fees.

Please email me if you are interested:
Tobinwebster at yahoo dot com

Hey I just wanted to share this with new airgunners that are considering power vs accuracy in hunting.
I give an overview of rifles, firearms, and power in suggesting a different approach.


Thanks Jaydog.

I have two and selling one. This is an original Wilkins pellet pouch with an upscale nylon rope "fat" strap that's super comfortable. Pouch holds about 200 177 pellets, 100 25s, etc. All good condition

$50 PP'd and shipped USA thanks

I bought a .22 FX DreamTact Compact here at AGN several months ago. Just got around to mess with it a couple weeks ago. The gun came without any mods. I added a Dreamline plenum and changed the tube to CF bottle. My first effort at tuning it got close to 800 FPS for JSB 15.89gr and the 18 gr lower. The reg pressure is at over 100 but maybe less than 110 bar. TP at "med" and hammer spring at 3 with the fine adjustment bottoming out at MAX. Tried a few higher settings without significant improvement. I didn't write them down but I believe I got as high as 160 bar and the velocity was not over 850 FPS. I think 800 FPS at 110 bar is a good balance but keep wondering whether the gun can reach 870-880 FPS with the 18 gr pellet. Of course, I'm saying this with the stock 320mm barrel. It would not be a "compact" anymore if a longer barrel is installed.

Does any of you have a DreamTact Compact (320mm barrel) tuned to run over 850 FPS with JSB 18 gr or 16 gr?

Thank you!

Up for sale is like new in a box element nexus 5-20x50 apr-2d.

$1100 TYD. PP FF or Pay fees.

I'm just finishing up a project and I thought I'd share with the team.

This is my M3 impact it started off much like any other FXM3 impact.





And this is what my impact looked like after about 20 hours of air brushing
















Here is the rifle in the backyard about 20 ft away, this should look pretty good in the desert






And just in case you are curious, here's the paint that was used for the project , it was a mixture of Dura coat

and house of Kolor paint.






Thank you for your time team.

Regards

Tdc

Due to my reasons, I must ONLY use pointed, alloy, light-weight .177 pellets for shooting rats in my backyard. This has caused an issue. With normal lead pellets, i had no issues before.

With these fast, hard pointed alloy pellets, there is no deformation. It just zips right through a rat. And the rat drops dead after about 5 to 10 seconds of running. The fact that I have a small backyard in a populated metropolitan city, this is not good. They and hide in a place where i can’t reach and die.

Given that i do not want to, and cant change my ammo. Where would be the most optimal shot placement on a rat, with a pointy, piercing, non-hard hitting, non-deforming, tiny alloy pellet?

I purchased this scope a week ago. Never mounted it. All I did was check the turrets for nice positive clicks, yes. Clear glass, yes. Nice reticle, yes. Can I see the reticle in the woods on 4-5X, no. I have to take my glasses off to see the reticle below 6X. I wanted to return it but am getting jacked around by the place I bought it from so I’ll just take a nice hit and be done with it. Comes with throw lever, 30mm high rings and caps. It’s made by Westhunter. $160 shipped. If this scope came in SFP, I’d buy another one.

Jeffrey Hernández, of Panama, wins EBR 100y Benchrest Finals!

A big congratulations goes out to EBR Pro class winner Jeffrey Hernández. Jeffrey shot an all time EBR 100y high with a 229 7x in crazy wind. Jeffrey is also the first ever competitor to win both Sportsman and Pro…. plus he did it back to back! You’re the man, Jeffrey! It couldn’t have happened to a nicer guy.

Lou

Is afterwards considered air gun talk? (Hope so).

For you old "Poots" like me out there, what is your favorite adult anti-depressant for after the guns have been put away for the day. Probably the Royal Hat for the northerners but what about you southern Gents that have access to the "good stuff"?

I have an FX Maverick 30 cal sniper. I'm using the original FX regulators, but I need more power. The FX regulators are limited to holding 170 bar. That's fine for the 2nd reg at 160 - 165 bar, but I need the first reg to hold at more than 170 bar and FX doesn't make a regulator for that kind of power. So my only option, it seems, is to go with an extra high pressure Huma reg for the 1st reg.

My problem is that I don't understand how the heck I'm supposed to degas the gun. I've been told that in order to degas my Maverick with Huma regs in it (or even one Huma reg as the 1st reg) I have to dry fire the gun until there's no air in it. I'm pretty sure my valve will get trashed that way from being slammed by the hammer with next to no pressure in the gun as the pressure drops.

I did read where some guys degas by loosening their 2nd air gauge. That sounds like a great way to wear out the seal under the gauge.

Does anybody know of a "safe" way to degas a Maverick with Huma regs in it -- a way that doesn't trash the valve or the regulators or the air gauge seal?

grungy

Bunch of pellets I have no use for. Down to one 177 rifle and it prefers cphp.

3 full tins of rws super domes
1 full tin of air arms falcons
1 full tin of FTTs in 4.52mm HS

The rest are open tins, look at the pics to see how many are left of each kind.

Don't want to separate just need them gone.

$75 shipped CONUS only

Usps priority insured

PayPal preferred