Air Arms Utah Airguns Pyramyd FX Airguns Daystate Airmaks Airguns Diana Airgun Depot Edgun West Palm Beach Airguns DonnyFL
Saber Tactical Optisan Side-Shot Scope Cam NE Airguns Baker Airguns AGS Topgun Airguns Predator International The Pellet Shop Huben Airguns Huma-Air Shooting Supplies Hurricane Luftvapen AEA Precision Airguns H&N Impulse Air ZAN Projectiles Hawke Optics Kraford and Lypt Airforce Protect Your Nuts Stud Mag Loader RX Target Systems Sports Match Scope Mount Specialists Altaros Slugs Banner CTA Thomas Air Performance Air Rifles Hatsan USA Georgia Air Guns SPAW Minor Skout Airguns RAW - Rapid Air Works Nielsen Specialty Ammo Patch Worm Weihrauch Sport Talon Tunes Airgun-Revisions JTS PARD ST7 PPP RTI

SOLD Daystate Grand Prix .177

This is an amazing rifle and in excellent condition - I just placed 2nd at the Can Nationals.
Fully adjustable velocity, from 500fps to 1,200fps.
The battery was recently replaced, charges to the full 12.6v. I'm the 2nd owner.
The original owner was a Daystate collector and this rifle has been serviced three times to ensure it's functioning as designed. Works flawlessly.
Scope not included. $2,500 Including Shipping in it's original box. More Pictures available upon reqluest.
From Daystate:
The heart of the Grand Prix’s electronic action is based on the latest Capacitor Discharge Technology (CDT), which uses a digital microprocessor to control a solenoid-powered, highly-advanced air valve. Courtesy of Daystate’s Mapped Compensation Technology program (MCT), the rifle’s computer calculates precisely the amount of time and distance the valve needs to open to ensure identical air releases.
This continually regulates the rifle’s power output, from the first shot to the last, eliminating any power curve and ensuring very consistent pellet velocities. An additional MVT program (Mapped Velocity Technology) then analyses the data recorded by the integral chronograph (velocity sensor), making further, infinitesimally small adjustments for even greater consistency and, therefore, accuracy.
An LCD window on the breech provides the shooter with feedback of the rifle’s status, including air pressure, velocity, shot-count and battery voltage - and MVT can easily be user-programmed on the Grand Prix to set it to the exact velocity preferred. The Grand Prix’s technologically-advanced action is backed-up by a stock that’s every bit as state-of-the-art. Made from laminate to eliminate stresses being transferred to the metalwork it cradles, the thumbhole stock has been beautifully crafted with both form and function in mind.
Its ergonomic shape and array of multi-adjustable features bring every conceivable benefit to the Grand Prix shooter, whether faced with a sitting, prone, kneeling or standing shot. Quick adjustments to the cheekpiece and fore-end can be made ‘on the fly’, while a more tailored gun fit can be achieved by way of precise adjustments to the cheek, butt pad and palm rest. A full-length accessory rail under the vented fore-stock also allows further fittings, for a totally bespoke setup and maximum control.
Manufactured in the UK on state-of-the-art, computer-controlled machinery and then hand-assembled and individually tested by skilled airgun technicians at Daystate’s factory in Staffordshire, the Grand Prix is built to the tightest tolerances achievable.
Throughout, every component has been carefully selected to harness the rifle’s awesome potential. Its specially re-enforced bolt-action breech houses a special match-grade Lothar Walther barrel, the accuracy from which is further guaranteed by the Grand Prix’s custom-developed muzzle brake. This deflects turbulent air away from the pellet as it emerges from the choked muzzle to ensure its precise flight to the target. And as you would expect on a rifle capable of such phenomenal accuracy, the Grand Prix boasts a seriously sophisticated match trigger to give the shooter full control over the shot release.
Totally electronic, it offers finely tunable weight and travel adjustments to both stages and is complemented by a multi-position, match-style blade. Computer controlled - electronic firing system. New patented MVT digital regulator for super consistency.
On-board built-in Chronograph to adjust power for optimum performance.
Single shot reinforced breech.
Gary Cane manufactured laminated stock.

Daystate111.jpg
daystate222.jpg
  • Love
Reactions: madmunki

SOLD SPF - Daystate Huntsman Classic .22 - $675 shipped

Cant believe I'm selling this... but up for sale is my Daystate Huntsman Classic in .22, right hand stock. One of the best looking air rifles to date in my opinion. Super accurate, very consistent with an amazing trigger. I would consider this to be in really good condition with only one mark on the stock as shown in one of the photos. Holds air forever too.

$675 shipped. Paypal accepted.

The "blemishes" on the receiver in some of the photos is just Balistol smudges, I wiped it off half way through taking photos as you can see below. Message if you have any questions, thanks for looking.

IMG_3576.jpeg


IMG_3577.jpeg


IMG_3578.jpeg


IMG_3579.jpeg


IMG_3580.jpeg


IMG_3581.jpeg


IMG_3582.jpeg


IMG_3583.jpeg


IMG_3584.jpeg


IMG_3585.jpeg


IMG_3586.jpeg

Got my Caiman today :)

So first off , this rifle is LOUD haha my huggett atom moderators do absolutely nothing for it. It is backyard friendly for the 30 acres im on but not for mosts backyards.

It is ergonomically more pleasing than my Taipans just simply when it comes down to how it shoulders off hand. The left side cocking is nice as well for the right handed shooter. This rifle will see no rests except bags to sight in and zero. It is currently tuned from Utah Airguns shooting 15.89 at 890 fps. My 5 shot chrono confirmed this. The trigger is not nearly as nice as the Taipan but I wasn't expecting it to be, and I can play with it and make it better, its not a bad trigger, its just hard to contest with a Taipans trigger, I do not know if any mass produced air rifle can IMO.

I went with a UTG bug buster 3-12x32 for this rifle and it is PERFECT FOR IT!! it focuses down to 3 yards and the reticle is great for the type of pesting/shooting I want to do with this. It also has the rifle in at under 6 pounds with air, a loaded mag, and the scope. It is also 21 inches from where the shoulder for the moderator mount is to the dimple in the buttstuck.

Only things it needs now is a sling , a moderator , and I am contemplating mounting a UIT to Pic adapter in the UIT rail on the foregrip so I can mount a magpul angled foregrip but still up in the air on that.

I will have some groupings and chrono readings Saturday evening for everyone and some more thoughts as well, thus far I am very pleased.

Airmaks Caiman.jpeg


Airmaks Caiman 2.jpeg


Airmaks Caiman 3.jpeg


Airmaks Caiman 4.jpeg


Airmaks Caiman 5.jpeg

New guy, may be a dumb question

I have a new to me .22 R5M that I am sighting in. It is pretty much hole on hole with JSB 25‘s at 10 yards. If I shoot NSA .217, slugs of the same weight the poi moves to the right 2” with no elevation change. Is this to be expected? The NSA 17’s and 20’s are all over the place. Is this just because they are not going fast enough? Would it even matter at 10 yards? Thank you for your time.

30 cal crush all other calibers???

I got into airgun watching Ted video 10 plus years ago. Ted have always said, the best caliber in terms of weight, size, accuracy, buffing the wind, etc, was the .25 cal. How much he talks so highly of the .25 cal. That is why most of my guns are .25 cals. I own a few .22 too. But never 30 or 35 cal. And now I see Ted ditching the .25 cal and going toward the .30 cal. He shoot 10 shot groups at 75 yards and 100 yards and they are literally hole in hole. WoW. I have never seen a gun so accurate. He is doing group size at 100 yards as most ppl are doing at 30-50 yards. And that isn't picking the best like most ppl do. He is doing it over and over and over again with his .30 cal. And no other caliber can beat it. Not even his best .25 cal impact. So did I went with the wrong caliber .25??? Damn none of my .22 and .25 cal can do what Teds 30 cal is doing. So makes me think, is the .30 cal the ultimate beast or what? Making me want to toss my .25 cal barrel away and go get a new .30 cal.

Screenshot from his video. 100 yards
Screenshot_20220922-131959_YouTube.jpg

Here are some 75 yards and all hole in hole. Not cheery picking like most ppl do.
Screenshot_20220922-131952_YouTube.jpg



Link to his video.

Scope vs Diopter/Irons

There seems to be a renewed interest in the diopter/factory irons, these days. I have always enjoyed the diopter. For many decades however, I seemed to scope every new springer or powder burner I would get. Like many I have spent a lot of time behind a scope to only to learn it comes with its share of disappointments. I still primarily shoot most of my powder burners scoped but have a good share wearing some type of irons only. I think the reason I enjoy a springer so much is the all the challenges that come with one. The main thing I do not enjoy about a quality springer is the size and weight. The diopter helps create a good balance to these issues. It adds to the challenge while keeping the gun trim and thin. Same applies to the factory irons. If you have never tried a diopter/peep sight I would highly encourage you to try one. Factory open sights are to difficult for me because these tired eyes just do not make a clear image on the rear sight. Also a very important thing with a peep is to get the iris as close to the eye as ”safely“ possible because it allows the smallest hole possible and forces consistent head placement. This “consistent head placement” is to me the biggest challenge with a scope. Something very satisfying to print a clover with diopter.

Quest of the .177 Caliber Benchrest PCP Rifle

Hello everyone,

I am looking for the most accurate .177 caliber PCP rifle for benchrest target shooting at 25 and 50 yards. My FX Crown MK II .177 shooting MRD 13.43gr will shoot MOA at both 25 and 50 yards. I am wondering if there is a rifle that will shoot a lighter pellet as well as the Crown.

Tell me what you have that meets these specifications:
1) You must now own the rifle
2) Shoots 10.5 gr pellets or lighter
3) Able to shoot 10 out of 10 shots MOA at either 25 yards or 50 yards ( see attached target )
4) The rifle must have a mechanical trigger and can be fired from the shoulder ( no electric triggers )
5) Is it factory stock with just regular adjustable tuning
6) If it has been modified please explain

If you have a rifle that meets all of the above I would appreciate you sharing the information and any photos.

ThomasT

View attachment MOA 25 and 50 Yard 10-Shot Target.pdf

The Weihrauch Diopter

This is a picture of the Weihrauch diopter sight. Discontinued decades ago. Still can be found occasionally on sights like eBay. I just got another from Australia. Weihrauch made this sight originally to fit their 13mm dovetail. They changed the dovetail to 11mm sometime in the 70’s I believe. All Weihrauch airguns for the past 5 decades have been the 11mm. Make certain you are getting the 11mm. Anschutz diopters are also 11mm. They have there advantages/disadvantages to to Weihrauch diopter. They don’t drop down over the thumb like the Weihrauch but don’t have a integrated stop pin like the Weihrauch. The Anschutz doesn’t seem to slide in the lower power sporters like the HW30,35,50. Even held on my 22 caliber HW95. I would be concerned on a 177 95 though. They are pricey and getting more so like everything else everyday. I think they add a good look to the gun, keep it light and small but most importantly make it fun to shoot.
A81D8E89-11DE-4768-B914-63A399AD4ED0.jpeg

  • Question
Help me choose the right rifle

Thank you to anyone who is giving me the time here with quality answers. I have had low end pellet and BB rifles for 40 years. My last gun that I purchased was 10 years ago and it was a Gammo 177 Single shot break barrel gun. I don’t mind this gun but I would like some thing possibly a little quieter one that Is possibly a little bit more powerful and accurate. I would like to move on to a BCP rifle now. I would like to move up to a 22/25 caliber as well. I have done some research and I am interested in the Umarex origin 25. I do have access to a scuba tank. The things that are important to me are: A dependable accurate gun that has few breakdowns, powerful enough to use for small game, and very quiet because I will be shooting a lot in my backyard as far as practicing and enjoying this with my kids.
Please direct me in the right way, I am looking to have this gun for a long time I am only an occasional user but want something that’s quality when I choose to use it.

NLA Scam warning

Mods, feel free to place this on another location if it would be better, I forgot there was no comments in the classified section

Be careful out there guys, a recent member sent me an offer for a wtb I had, but he is a scammer. Wanted me to send funds only F&F to his "wifes" account then also sent me an invoice from another name (the third email below). I wasn't able to get a phone number nor address

He sent me the first picture then when I asked for my name on a piece of paper he sent me the second picture. The scammers are getting better and better at fake writing on pictures. Pretty soon I will request a video chat to prove the seller as the item.

His forum name is

Henryhudson​

His emails are [email protected]
[email protected]
[email protected]
image3.jpg
IMG-20220921-WA0028.jpg

Slug A or superior heavy??? For slug only

Hey guys. Have a .25 cal impact. I want to shoot only slugs. Been shooting pellets for the past 20 years but after seeing Matt dubbers videos on how well slugs handle in wind over pellets, I dont think I will go back to pellets. The days of pellets is over. The time for slug is now. Should I get the slug A liner or superior heavy? Both these are slug liners if I'm not mistaken. But I do not want to get both just to test and have 1 sit and collect dust. So just want to get the best liner for slugs. Can yall who shot slugs tell me what liner to get. Will be shooting mostly nsa cause they are cheapest slugs I can fine. Thinking of the 36gr nsa and 38 gr nsa.

New HW77K Special Edition

Finally got a HW77K Special Edition today. Bought it from Mundilar, and of course they went on vacation so it took a few weeks to get it shipped. Once it did, it arrived in three days. They boxed it much better then Krale and it arrived umblemmished.

She's a beauty. I cleaned the barrel and shot it about 50 times tonight open sights. Groups were poor at first, but then it seemed to start grouping well with FTT's. I'll put a scope on it and give it a better test in a day or so.

So far I am in awe of the overall feel of the gun. It just feels so well balanced. Crisp shoot cycle and minimal twang.

Cheers
Z

HW77K.jpg


HW77K Butt Stock.jpg


HW77K Forearm.jpg

Just finished machining .30cal TJ's for FX Impact.

I had a gentleman contact me for a .30cal TJ'S barrel for his impact. He had a bit of a twist for this one though. He wants 2 ports. One for pellets and another for slugs. He wants to rotate the barrel 180 deg and change projectiles. Sounds interesting, so I turned it and set it up in the 4axis CNC. Slug port is 100% of bore area and pellet port is 75%. I do believe that It will breath. I'll try and post some pics.

SOLD (REDUCED).25 500mm STX Barrel Kit/Caliber Change with Superior Liner and Integrated Harmonic Barrel Tuner and more Price dropped $100now $275

Includes .25 STX Barrel Kit (Or Caliber Change) with Superior Liner , Carbon Fiber Sleeve, FX Moderator, Talon Tunes High Flow Dual Hole Transfer Port, .25 Pellet Probe. The Tuner, Moderator and Pellet Probe are Brand New. The Barrel , Transfer Port and Barrel Housing are used. Over $550 if purchased all new. Priority Mail Shipping included ! Price Dropped $100 now $275 save almost $300 if purchased separate.

IMG_3342.jpg


IMG_3345.jpg


IMG_3332.jpg


IMG_3336.jpg
  • Like
Reactions: buckhunter75

SOLD RWS Diana 46 T05 Stutzen Luxus Springer in .177

Something for the Diana connoisseur who likes classics, a Diana Model 46 Luxus in .177 cal, underlever springer with a nice looking stutzen stock. Very, very few of these seen nowadays. Rifle innards in virginal state, a bit of twang and a bit rough firing cycle, as can be expected of the "old" Dianas, literally screaming for a Vortek PG-2 kit For a rifle with a manufacturing date of 01-88 it's in very good condition. One minor issue which can be easily corrected, the front stock screws receptacles were plugged by the original owner (I'm the second). Other than that, metal and wood are in is exceptionally good condition. Original iron sights are included. Price is firm at $400 plus shipping (USPS-Priority preferred but purchaser decides), less scope and mount. Payment through Pay-Pal F&F or else +3%. If purchaser wants the the RWS lock-down mount and RWS 3-9X40 AO scope seen in the pic, I'll include those for an extra $50.00. I’m on the “old” Yellow a bunch of times and few here. Any question please call/text 787-463-3476 or e-mail at [email protected] Shipping only to any area permitted by state regulations. Thanks for looking.
Stutzen5.jpg
Stutzen6.jpg


Stutzen7.jpg
Stutzen8.jpg

SOLD SPF. Edgun Leshiy 2 REPR 450mm .25 Shelest pics added and edited

SPF
Up for sale is an Edgun Leshiy 2 REPR reg .25 450mm barrel Shelest kit.
Includes gun, aluminum handguard, probe, Shelest moderator, paperwork, two mags, pucks with o rings, and a 300bar carbon fiber bottle and a Edgun regulator gauge. She shoots both the 25.39’s and the 34 grain heavies equally well ant anbout 886 annd 860 and it’s in excellent condition. No leaks. REPR is set at about 136bar right now
Asking $1900 shipped.
PayPal friend and family please.
Shipped CONUS
Please check my feedback and feel to reach out to me with questions.
No trades please
2F723F2F-4BD1-4E72-948A-DA1548EBF156.jpeg
DA1F2277-2F7D-4DAB-A1EB-213162E862A9.jpeg
AB030D38-AB3C-4097-89C4-BABF5BD4E839.jpeg

SOLD Taipan Veteran Long .25 pics added and edited

Up for sale is a Chech Taipan Veteran Long in .25. CZ barrel.
Includes the gun, green laminate stock with picatinny rail installed, power plenum, fill probe, 1/2 UNF adapter which will allow you to mount any 1.22” diameter moderator and a DonnyFL speed dialer. Also has a Huma reg installed at 135 bar and comes with stock reg.
She’s shooting the 25.39 Hades right now at 865 hole in hole.
Scope and rings not included.
No trade’s please
$1000 shipped CONUS
PayPal friends and family.
Please check my feedback and feel free to contact me with any questions.

B59FD2B6-7506-4F78-89FB-E6D1B4E9DA3D.jpeg
C820FE95-ABF6-4665-85E2-959B09C711A3.jpeg
8511ADF5-41D9-4728-ABD0-214703746F60.jpeg
33429C98-9E99-4405-B25B-53CFD7EC10D2.jpeg
01289FBD-B576-48B8-83E5-58D282CE80D6.jpeg
331465C8-09B5-420A-9381-352F8E8F45A3.jpeg
D2C9AE9E-C77D-4D48-8B30-AD48D1FB89BD.jpeg
4053C65D-FD8E-4189-99CF-8945E47F0575.jpeg
1F208437-4364-478F-9BF5-FFD184F9AF28.jpeg

SOLD REDUCED. Taipan Veteran Long .22

Up for sale is a Ukrainian made Taipan Veteran Long in .22.
Includes the gun with a new coffee laminate stock with a picatinny rail installed, Power plenum and two mags, and single shot tray. 20MOA rail. A 1/2 UNF adapter kit which allows any 1.22” diameter moderator to be used and a DonnyFL speed dialer. Also has a Huma reg set at 135 bar and includes stock reg. She is shooting the 15.89 JSB Hades at 880 hole in hole right now. Needs nothing.
She is used, not a new gun. You wish for like new condition please feel free to purchase a new gun.
Moderator is not included but there to show the clearance of another 1.22” diameter moderator is used.
REDUCED $950 shipped CONUS
No trades please.
Please check my feedback and feel free to contact me with any questions.
9DF2DD11-2A24-411E-8D5C-AEC6ABF3E19A.jpeg
E6514DBD-8EAA-4586-A3F0-2D630F960915.jpeg
229C1B9D-C6B1-4A5B-BFF8-D091D9B8BC4F.jpeg
F50B3AB4-DC1A-4561-A1F5-983FB6D89731.jpeg
ABF1FBFE-4CA3-45C2-ADA1-4A1E488D8DC8.jpeg
EFBBA801-BEFD-48D7-9E7D-04133F9AA632.jpeg
2F1C7AA0-45DE-4B49-A0CF-284D7074BE10.jpeg

Filter