FX Impact Saber Tactical ARCA Rail Gen 2 Compact - New, not a scratch or blemish on it!! No box (Wife threw it away). $115 Shipped CONUS
PP F&F or G&S if you cover the fees. Venmo & Zelle also accepted but not preferred.

i got this from aoa few mouths ago had a bout 10 pellets down it it has ldc on it 22 cal 350$ plus shiping no scope

Pulled from an Rti prophet
22 caliber
23-1/2” long lothar Walter barrel
Barrel probe..
Shroud and barrel removal tool..
1/2x20 threads
Asking 235 shipped

ACCU-TAC LR-10 G2 Quick Detach Bipod, ($385 retail) some wear only on the picatinny attachment area
Selling for a shorter model

Features of ACCU-TAC LR-10 G2 Quick Detach Bipod​

• Materials: 6061 T6 Aluminum alloy / High strength steel hard ware
• Min. Height (Legs at 45degrees): 7.0in / 177.8 mm
• Min. Height (Legs at 90degrees): 8.75in / 222.25 mm
• Max. Height (Legs at 90degrees): 12in / 304.8 mm
• Min. Stance (Legs at 45degrees): 10in / 254 mm
• Max. Stance (Legs at 90degrees): 17in / 431.8 mm
• Closed Position Width: 3.25in / 82.5 mm
• Closed Position Length: 10in / 254.0 mm
• Weight: 27 oz
• Color: Flat Black
• Coating: Type III ( MIL-SPEC ): Hard Anodize
• This is a taller Accu-Tac models that are used of AR15 and similar like the Crown with the Saber chassis, please do your homework on the purchase for your needs

$350 PP FF Lower 48

***SOLD***

***THIS IS A PERSONAL SALE BY DONNIE REED AND IS NOT ASSOCIATED WITH BAKER AIRGUNS!***

I'm selling my used Sightron SIII 10-50x60 FTIRMH.

Comes with original box and all accessories to include 6" sidewheel, neoprene scope cover, scope caps, and rubber eyepiece.

In perfect condition except for marks left on the tube from scope rings. See attached pictures.

Retail price is $1579.99. Asking $800 including shipping in the CONUS.

No paypal. Prefer Facebook Pay.

I already have Kalibrgun Cricket 2Tact in .22 long but looking for another pcp rifle. (I might have the pcp bug). What’s out there that is quiet to shoot in small backyard (30 yards) and range shoot out to 100+. I only paper shoot but plain on getting KYL steel targets for range. I’d also like to stay with .22 and under $2000. And thoughts or suggestions welcome!

Purchased this Taipan Veteran .25 new. It has never been fired. Sent original barrel off to be modified and never got it back. I'm just cutting my losses at this point. Rifle is complete MINUS barrel. Has new Huma regulator and Czech plenum installed. Comes with (2) mags, fill probe, and OEM gauge. A sehkmet digital gauge is installed but my cat chewed the charging cord. As such, I am including original gauge, still has plastic on face. This rifle is in pristine condition. Coffee stock is perfect. Just needs a barrel. Asking $500 shipped. PayPal F&F. Thanks for looking!

Selling a lightly used Diablo dry air system with 3d printer holders so you can hang it next to your compressor. I used zip ties to hang it above my compressor. Great for a shoebox / Yong heng type compressor. Comes with everything in the photo. Asking 100 shipped conus. Ppff obo

Messing around with my 360° Camera awhile back while loading some magazines.

It's hard to keep the PCP airguns fed when the tank allows so many shots per fill! Haha

Started with a Gamo Break Barrel a few years back and man I would shoot around 1/4 a tin during a session. Now shooting the Impact I'm lucky if I don't shoot a whole tin within a few hours!

It would hard to go back to a break barrel after shooting a PCP though. My wife also agrees as she is 4'11" and could barely break the barrel to load another shot

Like new Hawke 17271 SR Pro II 8-32x56 scope w/ parallax wheel, sunshade and EagleVision 30mm rings. Perfect condition! No box. $400 shipped. PayPal F &F. Thanks for looking!

Built a folding bench top so I could shoot out my basement window during the winter. My wife tried to make fun of me so I would take it down.... not a chance it's here to stay! Haha

I dont use it much but when winter comes and the bird feeders go up its nice to stay warm inside, have a cup of coffee, watch the birds, and pick off the "bad ones".

Anyone else come up with a clever idea to shoot during the non optimal months for being outdoors?

---

I have 3 barrels. 22 25 and 30. You choose the barrel. This came with the origional regulator, I bought a repr afterwords. Just the gun and 1 barrel with both regulators is 1800.00. The barrels are all alphas. The 25 has 2 magazines, the other 2 only come with one magazine. Barrels will be only be sold separately after the gun sells. Also have extra indexing kit and parts that commonly wear out. If your interested message me and I will provide my cell phone number. I will cover half of shipping. Will include a full tin of Jsb to fit the caliber you choose. Gun functioning perfectly. I am a shooter and not a collector, looking to try something else for a while. Warning, you will burn thru pellets very quickly! I placed a carbon fiber wrap around the shroud and glued a picatinny rail for a light, it comes off easily if you dont want it, but it protects the shroud from dings. I have good standing on the board if it's still there after this upgrade. I prefer a conversation on the phone rather than texts from those interested, I'm old.

---

I'm really enjoying the pcp air gunning and have definitely got the bug. I visit this sight every morning with a cup of espresso as part of my daily routine. I've had a Prod for a while now I bought used from a fellow member. I've done plenty of research on tuning and moding the gun. Currently it has the Bstaley oring mod and does well, good numbers, and the gun shoots exactly where I point it I know I can (Why the auto italics?) sink a ton of money into this gun and the consensus I've found is at the end of the day it is still a Prod. Don't get me wrong I do love my Crosman/Benjamin guns. I still use my 1377 and 2240; the Prod has become my go to gun.

What's up fellow airgun nuts. I am known over on Archerytalk and T4R, and now I finally get the privilege to become a member and show off my new PCP here!

Picked up a beastly Brocock Bantam HR Sniper in .22 cal from my cousin over my trusty Daisy Powerline 901 that has been my past control choice for almost 10 years. I probably have eliminated over 1000 house sparrows, starlings, etc. with that trusty little multi-pump but consistency and power were its two main limitations.

Bring on the Brocock. My second 10 shot group ever with it produced a hole in the target so large, my last couple pellets didn't even bother leaving their mark on the paper. (see upper right target, picture below). At 900fps with the ~25gr JSB jumbo, it ripped the pellet good - but the ability to externally adjust power output was a deal maker.


Fast forward to today, after about 2 weeks with the gun:

- I have a Silent Thunder Ordnance Falx in standard flow coming in to tame the bark - really appreciate the extensive testing and physics based R&D with Tesla valves on how he crested his LDC guts.
- I have the Optisan EVX 6-24 turrets figured out to punch holes at 70 and 100yds - just took my first starling st 105yds last night!
- I am looking at picking up a spare mag - anyone using Carm for replacements?
- Also trying to figure out what bipod system to run - I see some guys running an extended picatinny rail to get the bipod further towards the end of the barrel? Concerned about weight over max stability as it's already a beast and I do enjoy hunting with this well constructed lead slinging machine.

SStoked to be here on the forums and looking forward to contributing as well as learning from thr many minds present here!

I'm looking for a scope with side focus and a Mil-Dot or MOA reticle for my Daystate Huntsman Revere. I would like to put the smallest scope on it that I can in keeping with the sveltness of the Huntsman.
I currently have a Leupold 4X rimfire scope on it, but I'm not satisfied with the lack of adjustable focus and I believe I'm going to need some mil-dots to help with trajectory at different yardages.
Does anyone have any recommendations?

Made the drive to Bakers to pick it up today. Met the guys and gal that was working on a Saturday. Very kind and helpful. I had a great time. Checked out some airrifles and equipment . I got to handle a evol 22 mini... I shouldn't have... man that is one fine rifle!! Super light... looks fantastic.. felt great! I gotta have one someday. I got the compressor wired up and run in. I topped off my tank... wow!! Just WOW!! this thing rocks...

Hello,

A few months ago I bought the Gamo Replay 10x IGT springer airgun.
Very powerful and accurate, but this airgun ate 3 different scopes! :-(
The recoil is brutal.

Looking for a solution, I found the Diana Bullseye ZR mount.
Praised by many and quite expensive, but I bought it to see if it really works.
It looked like it worked, but now and then I got some fliers that I could not explain.
I filmed the mount at 240fps and saw that while it protects the riffle from the initial recoil,
the scope returned back and smashed its initial position. Not a very effective design...

So I started a small Arduino project to build a standalone battery powered
high-G recoil meter to measure the actual forces that were exerted on the scopes.
It was not easy because the available accelerometers have a very slow sampling rate
of 1khz and high-G versions were not easy to find. Anyway, the results showed that
the scope felt way more than 400 G! when attached directly on the rail but when put
on the Diana mount, the recoil was indeed less but still considerable.

Many times it reached 400 G. That was when the scope was loosing zero again.

Apart from that, the mount had play and it was centered only on the front with
a conical pin. The accuracy was not bad, but the Gamo without this mount was
more accurate.

Frustrated and after all the money I've spent, I decided to build my own mount from scratch
correcting all the errors that the Diana mount had. The result was not bad!
Maximum g-force exerted was 125 g.
Why they did not build something like that, its beyond me.

Below is a small demonstration.

I hope you like it.
Thanks.

WTB Delta Stryker HD

********** I will answer emails in the order I receive them. I'll mail as soon as I can, but may be a day or two so I can ship everything at once....

Prices are firm. PayPal Friends and Family. NOT INTERESTED IN TRADES ********

1. Optisan Viper 3-12 x 44 w/ SBC reticle side focus 10 yds illuminated

Used but great condition. Made in Japan. Illuminated reticle. Works perfectly. Side focus parallax down to 10 yards. See pics for condition.

Ships in original box.

Price is $250 shipped.








2. Aimsport Alpha 6 2.5-15 X 50 30 mm w/ MRAD reticle illuminated. [SOLD]

This is barely used and works perfectly. Focuses to 10 yards. Full disclosure -- there is a small spec near the top of the reticle -- I tried to show what it looks like in the reticle pic (in green). It's barely noticeable and doesn't affect the performance at all . The scope came that way and I didn't notice it the first couple times I used it, but it's there. Reflected in the price.

Alpha 6 2.5 15 50

$105 total shipped.



3. Weihrauch 4x scope AO focus down to less than 7.5 yeards. Metal caps. Barely used.

Weihrauch 4x Scope

$110 shipped.




4. Neil Claugue Moderators

I have 2 of these. Threaded 1/2 unf and made for my .22. Carbon fiber.

Prices is $105 each shipped.



5 Altaros Regulator – new – BSA Ultra, Bsa Lonestar, BSA Scorpion

This is brand new. I bought this for my BSA Ultra SE, but couldn't use it because it was the wrong size.

I bought this from the ebay link below – make sure to check it out to confirm it fits your gun before buying. What you see in the pic is what you get – no extra spare o-rings.

Bought for $98 -- selling for $50 shipped.






MODERATOR EDIT - Outside link removed

so a while ago i asked all you guys about a first pcp around 300 dol and got alot of good advice and sugestions and considered them all and have gone with the barra 1100z in 22 cal so far i think i made a good move the barra pumps up to 3000 with hand pump very easy am shooting it at 900 fps and getting 40 shots from 3000 down to 1900 then 40 50 pumps and its back to 3000 the veil camo is nicely done came with two 10 rd clips two shot trays one clip was defective and got ahold of barra they are sending me new one customer service is top notch gun hits hard scoped it with a discovery optics scope and has been very accurate after zero in in my opinion i think its an awesome first pcp rifle