have 6 sealed tins of .25 jsb kings.

these were $118.24 shipped from pyramyd.
and will ship in pyramyds packaging for safety.

$95 shipped in the us
paypal only please.

would also trade for a 500mm .25 stx superior heavy liner for fx impact.

Long winded, but full disclosure on rifle… For sale is a REPR Leshiy 2 450mm LW Barrel in 30 Cal with a new Tishina 450 mm 200 kit in Red with Black handguard. Also has the new Valkyrie grip with tools inside, comes with three red magazines, three black OEM magazine holders and one J. Kwan magnetic magazine rail holder. Also has the Leshiy 2 300-Bar 350-CC bottle.

Selling at a large discount for $2360 PayPal G&S, fees covered by me, shipped, and insured to lower 48 for amount paid. Discount to $2250 PayPal FF, shipped and insured for well-known members and friends I have relationships with on the Forum. My Edgun story is no secret, I am not selling a “perfect new rifle”, but everything in this advertisement, the good and bad, is worth much more than the price I am selling.

Before I removed and rebuilt the REPR on this gun, it was tuned by Sean at .3/.4 jets and 170 bar reg pressure, pushing the 44.75 hades at about 920 with a spread of about 10 in 8 shots. However, I wanted it a little more accuracy and to shoot the pellets a little slower. Degassed the gun and lowered regulator pressure to about 140. Then started working regulator back up to 3-5 bar at a time, clearing the plenum slowly with a few shots till I reached 165 bar (looking for speed of 910) and then at 150 bar the 0-ring blew on the end of the piston (no reason why this would happen as I was doing everything correctly, but it did). I think this was the point I decided to no longer own Edgun products, especially after my Edgun West issues. Here is that post for those that are curious. https://www.airgunnation.com/thread...n-west-and-the-l2.1255979/page-3#post-1263928.

Decided since I had to take the REPR apart I would replace the Delrin cup, ceramic ball, spring, clean and re-oil the washers and replace all the 0-rings. Other than the outer shell, the REPR is new however with that it does some reg creep after this rebuild, but this will happen till the ceramic ball is seated into the cup after a few hundred rounds. I did very lightly tap the ceramic ball with a punch inside the cup to help seat the ball a little bit and quicken the break in period. This is only slightly as any more pressure could damage the ball. I Leaned this trick from a friend on the forum. It’s not going to fix new regulator creep fully but will help break in happen faster. According to Brian at Edgun west “ALL REPR regs creep till about 200-500 rounds”. Exact quote, FYI.

I am the second owner of this gun. Bought it from CTShooter when I was having issues with my .25 Cal and Edgun West. CTShooter built the gun to sell on AGN and offered it to me, most of the rifle was new. Here is the link to the original sale – https://www.airgunnation.com/threads/spf-leshiy-2-30-custom-build-450mm-lw-barrel.1255422/

I have added many options since buying from Sean. I have shot about 200 rounds with CTShooter’s tune, even took it hunting in the Sierras last week and got a few chipmunks at 40 yards. Never any issue, gun worked perfectly, till I wanted to change the jets and reg pressure as stated above when I got home. The regulator issue on the rifle has been fixed with new rebuild.

List of extras…

Extra complete REPR regulator (Full rebuild, never installed – All new internal parts / set at 120 Bar before degas and stored)
Comes with REPR tool
Eagle Vision Moderator Adaptor
Full jet power kit, plus extra two .2 jets and extra .3 and .4 jet
About 8 red breech discs – one inside grip, one in gun (never have too many of these)
2 new 15mm pins to replace the 16mm pin that is currently in the gun for use with CF handguard. (Should be replaced as it is a little loose)
O-Rings
Current REPR on gun has been completely rebuilt and installed and set at 140-bar (never shot)
Full power train kit bought through Edgun West still in the bag
Valkyrie Moderator remove tool
2 extra magazine magnets
Magazine magnetic disc removal tool
Full CF mount with brand new hardware for CF handguard (special made so it’s perfectly plum with the gun base).
2 30 Cal red speed loaders
Fill probe
Miscellaneous new parts, pins, different sized springs, indexing arms, two new metal indexing rollers, one Delrin roller, regulator bottom cup, ceramic reg ball, etc. (see pictures for level of extras) – pretty much everything you would need to fix any issue you would have on the gun.

Again, rifle and all accessories are $2360 PayPal G&S, fees covered by me, shipping and insurance covered by me to lower 48. Discount to $2250 PayPal FF if I know you or you have a healthy amount of positive feedback. The new website has corrected many of the feedback issues, so I don’t feel this is unreasonable.

**Scope, Scope Mount, Scope Level, Edgun Digital Gauge, Fore grip not included in sale.

Just an FYI for potential buyers. I am stuck at work till this coming Friday (7 days). I am hoping to ship before that but Friday could be the date. Beyond my control. Sorry.

Like new Zbroia Kozak .22 with 2 magazines
SOLD

Like New AEA HP Max .357 with two magazines
SOLD

Like new AEA HP SS .25 with two magazines
SOLD

Scopes bipods and moderators not included!

All three guns are in pristine condition and all come with 2 magazines and fill probe for each and includes shipping to CONUS address.

Thank you for looking!

Perfect gun. Has never had a scope mounted to it $1450 shipped.

FX - I applaud your continued product innovation. However, please stop releasing products that are not available until several months after the announcement date. In some cases, they never reach the market and get buried.

I understand you are likely trying to create "Apple-ish" marketing hype and that's fine before the product release. Be prepared to deliver your product a couple of weeks afterward though. I don't want to hear the COVID, hiring, or logistic excuses. We all have them and found solutions to workaround.

#dobetter

Last year after some 30 or so hours I seized the crank arm, replaced the whole piston + cylinder. But noticed a small crack on the aluminum housing (just above that upper rib) probably because of the stress when seized.
It was just a matter of time something to happen.
Here me go now shopping for a new. I think it will be YH again.

COMES WITH BUBBLE LEVEL 20 MOA ARKEN MOUNT 350 SHIPED BOX SUNSHADE LIKE NEW

Looking to trade IR Leupold and NF scopes for Edgun Leshiy (25/30/357) 1-2, RAW HM1000x laminate R stock in red, blue TH preferred and barrel kits (22/25/357), FX bottle guns, Sk-19 (25/30), RX2.25, SaberTact and K&L FX accessories, Evanix full autos (25/30/357), .30 Evol, Daystate Red Wolf HP RL 30 etc, working bu compressor etc….I’m fazed out of all but 1 .22 and have too many scopes but am open to considering all offers including NV. I have more to offer in trade also (preAF RAW, WAR Flex, etc). I have cash to add or buy the right item/s. God bless you all our Nation and AGN. Message for offers, info and pics.

-Keahi

Box has been opened but the unit is new. Won it in a raffle. $475 shipped.

RTI Prophet Compact Performance .22cal:
Plenum + Tuning + Power + Bottle


Do you know what to do when you bought a gun — but it hasn't been delivered yet?
➔ Yupp, you can shoot it in your mind, tune it in your mind, set up a new Strelok file, gather the ammo for the first day of testing, clear a spot to store it, order o-rings, aftermarket performance parts, accessories....
OR:
Pester your fellow forum members with questions!

➔ I've done the above. Stopped short of selling a kidney to pay for it all.
Now it's time to get on the forums....!



Before you answer any or all of my questions (simply refer to the number) — I want to make sure we're all on the same page:

● I only have a CF tank, and I can't drive clear across town to get it refilled (because my town is the size of a country, 10 million+).
Therefore, my average pressure I can put into the gun's airtube is mostly going to be less than 300bar.
➔ Average pressure available in my bottle I'd say is going to be 250bar.


● I'm looking for this tune in .22cal:
• 33-36FPE
• 18.13gr to 18.5gr pellets
• 900 to 950fps MV
• I'll play with slugs as well
• 5 to 100 yards
• I want to do pellet BC testing, which requires frequent power setting changes




Q1 • Extended plenum: By how much would I increase my shot count (ballpark figure)? (this is the Compact Performance version, and I assume 250bar in the bottle)



Q2 • Extended plenum: I am somewhat concerned for a quiet tune — i.e., rather shorter sips of air at higher pressure — than longer gulps of air at lower pressure.
Would the ext. plenum favor that kind of quiet tune — in the Compact Prophet — or does it move me into louder?



Q3 • Extended plenum: Any other advantages or disadvantages of using the ext. plenum?



Q4 • Regulator adjusting: What are the proper steps to change the regulator setting — not to mess things up? (This is my first gun with external adjustment.)



Q5 • Larger bottle: What options are out there to use a larger bottle on the Compact? (price, link?) (The bottle must not hinder the use of a large DFL silencer.)



Q6 • Other advice: Do you have any other recommendations for me?



Thank you all!

Matthias

Made a post yesterday about short stroking my TX200 and today I got the chance to actually test it out without unpredictable wind wreaking havoc. Well, I think I'm going to leave well enough alone here. There was only one questionable shot out of 30 (AND IT WAS #30 OF COURSE!) and even that one was only barely touching the line. I got excited and aimed my crosshairs over the pellet hole instead of the bullseye so that is on me. Anyway, I am super excited to keep seeing what this "new" girl can really do!



#30, The drunk pellet of the bunch kissing the line:



EDIT: Decided to try again. Missed one high. I'll get this stupid game eventually!

brand new take off stock thumb hole lam to fit regular version of hw 110

Selling my like new DAR Gen 3. Less than 700 pellets through it.

30 shots per fill on the reg, very consistent. Doing 890 fps with 18.13s, and 960 fps with crosman 14.3 HPs.

Stacking both those pellets at 50 yards.

Comes in original box with one mag, which is all they send with them.

Great gun, just moving it on for the funds for next project.

PayPal preferred but will take Postal MO as well.

Ships to CONUS only!

As of this moment, Utah has some FX pellets available. I just noticed my pre-order has shipped. Good luck!

First time at the indoor range with my brand new Impact 25 cal 700mm barrel. My set up is as follows for my question. STX barrel set with the slug port open. DonnyFL moderator.
1. 250 bar fill
2. Reg 1 @160 bar
3. Reg 2 @100 bar
Macro 15
Micro 4
29 gr NSA slugs. Slugs were lightly lubed with WD40 silicone spray the day prior. The chronograph string is as follows after 26 shots at 50 yards.
High-974 fps
Low-935 fps
Average-956
Spread-39
Std Dev-14.9
The group started on the bottom and steadily climbed and basically settled at the top with the raged hole happening at about 940 fps. I’m very new with the impact and very much aware that it’s basically infinitely adjustable and I’m very welcoming of ideas.
I’m very curious as to why the POI changed steadily in a vertical direction while making zero adjustment to the aim point, shooting off an accutac bipod, using a rear bag for support. Is it simply a matter of the gun breaking in? Did the silicone lube potentially cause this?

LCS SK19 in .22 caliber. I bought it from AOA 2 years ago and recently had it sent in and had some internal upgrades done. It's in great condition and have never had a issue with it leaking. It has the 580cc bottle. I installed a barrel band, bought from another member on AGN, that makes installing the barrel back on after cleaning and getting the spacing off the magazine , every time, no problem.I made a bag support so it can be shot off a back bag. It's accurate and fun to shoot, I just am parting with it to buy another air rifle. 1500 and buyer pays shipping to wherever you live on which carrier you choose. My location is Missouri. Money order or cash...I have many videos of me shooting it on You tube if you want to see how it shoots. It will be in the original plastic case in the picture. My ATN scope currently mounted is not included.

Benjamin kratos in very good condition. Changed from 25 caliber to 177 to improve shot count. Gets 120+ shots on a fill from 3000 psi down to 2000 psi. Around 950 fps with cphp pellets on half power adjuster, does 900 or so with 10.65 pellets with the power adjuster open fully.
Comes in original box with accessories and 3 14 shot magazines.

$350 shipped PAYPAL to CONUS only

Howdy felluhs!

So I'm trying to learn to tune my wildcat bt by myself but I'm afraid I may have caused damage.

So I was setting my second reg pressure to 150, but was being an idiot and wasn't paying attention to my bottle pressure. So when I refilled the bottle it turns out my 2nd reg was maxed out to atleast 200 bar. I immediately shot out all the air and properly set the second reg. Do you guys think I caused any damage? My gun seems to be working OK right now. Just shooting alittle weak bit I assume that's because I haven't set my hammer tension yet. What do you guys think? I certainly won't be doing that again, lesson learned

Daystate Huntsman Revere in .177, excellent condition. Very accurate, see photos below of groups shot at 50 yards indoors with JSB 10.34. Have 6 tins through it, completely reliable & no leaks. Have a bunch of close up photos of different areas I can send on request
One magazine, single shot tray, Carm single shot loader, two fill probes. Original box & all Daystate & AOA paperwork.
Scope & rings shown in pictures are not included.

$1150 shipped (CONUS only) for the rifle & accessories noted above. Not interested in trades at this time.
Paypal or USPS money order.

7 tins (500 per) JSB 10.34 grain .177 pellets, all unopened.

7 tins for $90 shipped(CONUS only). Would consider working a trade for JSB .22 in 15.89 grain only.

PayPal or USPS money order.

Selling a .22 Dreamline laminate. Comes with one magazine and fill probe. $1000 shipped

This was the first of many RMAC’s that I plan on attending, and I have to say it truly was an experience one would have to see for themselves. I finally decided to quit talking about going and committed myself to being there!
We all throw out tidbits on the forums about this airgun community being awesome, but let me tell you all, I’ve witnessed it first hand. All the people I met, from the movers and shakers in our industry to the famous youtuber’s, and lastly to the newbies like myself, it was an unbelievable experience. Way better than going to Disneyland as a kid, no lie.

In this thread I wanted to give a big shout out to Utah Airguns and the staff that ran it. I was able to catch a few names- Travis, Alex, Jayden, Tanner, all did a great job from being a range master all the way to shuttling people around in golf carts to making sure there was plenty of air for the guns and water to keep the shooters hydrated. They literally made me feel like I was a Frederick Axxelson, Steve from AEAC, or a Cecil from Hatsan.

The registration process was totally well organized, and the way everyone was given ample range time for sight in was great.

I got to meet DonnyFL, the fx staff, the Hatsan team, AEAC Steve, AGN Michael, Cyclops Joe Reah, and famous team shooters like CENTERCUT Mike, Dereck Wall, The Daystate crew, yeah I had a blast.

I didn’t place as high as I would’ve liked but for a first timer I didn’t do bad, especially when just a few months ago I had never shot past 50 yards.

If any of you are the ones that keep saying “someday I’d like to attend”, like I did for years, well, put it in your calendar and start saving up. You won’t regret it!

Oh, and for sure practice! This is not something you want to go into and you just shot a few targets the week before, lol

Next Stop- EBR!

Nice fx impact m3 .22 caliber. Has 600mm standard superior liner and 480cc bottle. Has huma digital gauge for 2nd regulator and wika gauges for the other 2. Has saber tactical cheek piece and bag rider. Has Ernest Rowe large transfer port and carbon fiber sleeve. Also has a oring kit.Comes with 1 magazine and owners manual. And ergo grip.No paperwork, I bought it from a fellow member back in February this year. Shoots amazing, I just don’t use it. Currently shooting jsb 15.9 at around 1000 fps. Sell for $2000 PayPal. I will pay the fees and the buyer will pay for shipping. Text is faster 828-455-4459

Selling my Leshiy Classic with the following:

.177 250mm, .25 250mm and .357 350mm Barrel's (Will include a small amount of .357 pellets that I have left)

Extension with original baffles, DonnyFL baffles and a 3d printed set of baffles for the .357 barrel.

Huma regulator installed and original regulator included.

Additional external air reservoir with a 3d printed bracket. Aligns great, no leaks, adds nicely to the shot count of the gun.

Includes significant about of o-rings to fix any leak, though I have not had any leaks since I've own the rifle. (see pics)

Also has a 3d Printed grip, along with an OEM walnut and synthetic grips as well.

Scope is a UTG 3-12 SWAT scope.

Leshiy was also modified to have a "two stage" trigger - works great, breaks clean.

Looking to sell to get into a rifle more appropriate for Hunter Field Target.

Asking 1450.00 - Would prefer not to split up. I'd be willing to split shipping, you cover PP fees or send FF.

I am open to a phone call to discuss any questions.

Trades: Pulsar, Wolverine, other HFT ready gun.

thanks,
eric

Omaga tank with valve,9 L,new hydro 350.00 shipped