Handguard for Western Mordax [email protected]

made from aircraft aluminum.

M Lok on 3 sides

weight 6.5 oz

$129.00 plus shipping

Ordered my first pcp last week,Day State Wolverine. Can not hardly wait. Just been shooting break barrels so I am excited to get it guess it is Christmas!

$950 shipped or will look at trade offers. Comes with moderator adapter pic butstock adapter original parts fill probe case. Great condition. A couple minor scratches on the back shown in pics

Hi guys

Gregory from Germany says hallo- great to be here..

I just purchased today online my first fx dreamline lite in 30 cal. I only have a springer Weihrauh 85 and old daisy pcp but its crappy.. So i got the 30 cal because here in germany we only have 2 options for dreamline- the .177 cal (4.5mm) and the 30 cal (7.62mm) that the state approved but ofcourse it is limited to 7.5j or 5.5 foot pounds so its a joke..

But ok, included are the original hammer and transfer port knob so within minutes i can have it up to full open version specs which are by 30 cal around 110j or 82 ft lbs... of course its not legal in germany but holland is 2 hour drive so i can do it there legally holland has no stupid limits..

i always wanted to have a .22 cal but as you already know- we can not get the fx dreamline in that caliber- only .177 or .30 cal.. so i got the bigger one..

Now i am terrified of the .30 cal or to be more precise of the air consumption on that beast and would love to convert to .22 cal

and i have no clue what to buy- some wrote that i need a conversion kit with .22 barrel and shroud, others that i need the new .22 push pin, others said i need a new transfer ports and so on.. i am totally confused! i want to convert but dont know how or what to buy.

i want to go the .22 route but i want to have the MOST power available for that dreamline platform in .22 cal with heavy slugs form H&N 36gr..
then i will not be scared of the huge air consumption that the .30cal has.. it will be a fun target shooter but also good hunting rifle with heavy slugs

can someone help me- someone who did such conversion from 30cal down to .22cal and maxed out the power with mods for fx platform?

thanks guys

32 yards with my 25 cal M3.
Plenty of energy but no meat left to eat.

Hey guys the net hasnt yielded any luck besides a shop 3hrs away. Looking for the closest shop to milford PA that has a selection i can go look at and hopefully buy.

Are there companies out there that are better quality than others? Or all o rings pretty much the same?

Nla

Admin, any chance you can wave the 10 day 10 post thing?
I been a member for years. I haven't been on in about a year and my email for my first account is full and can't empty it. Baby Sherman was my old account. I had to make a new account.
Trying to access the classified section.
Any help admin, is much appreciated.
Thanks

Selling my Impact mk2 Matt Dubber slug gun, as set up by Utah Airguns. Currently tuned for 34 gr. slugs @ 980 f/s, 73 ft/lbs energy at muzzle. Devastating on small game. Ships with case and all the spare parts it originally sold with. It is in near perfect condition, has two small marks on it, size of a grain of sand. I purchased this in 1/21 new for $2900.00, asking $1200.00 for it.

….

Daystate Wolverine Forester HP R .25 Cal. $1500

Comes with:

1. 2 Daystate Magazines
2. 1 Daystate Single Shot Tray
3. Convenient, soft, pull string felt pouch to conveniently store your mags and SST
4. DonnyFL Sumo

Bought from a fellow member last summer ( 2024 ). Beautiful rifle and extremely accurate. I prefer my 25cal bullpups so this rifle deserves a new home.
Scope and bipod not included.





The following images are from the previous owner.

How do I go about getting my new pressure gauge parallel with my gun while installing?

Turns out die making is hard! who would have thought. I think I finally have a die that makes half decent slugs. Definitely not going to give any of the really slugs out there a run for their money but a big win for me. I can get about a 1.5" group at 50yrds with my airarms Krait. Baby steps.






Couple of my takeaways:

• The diameter of the slug mattered more than the profile or general shape
• Deeper hollow points tended to do better
• Taking the time to harden the dies properly was well worth the time as it made them much easier to polish. (will likely help with longevity as well)
• The overflow extrusion hole should be no bigger than 3/32 to create enough pressure to fully fill out your die.
• Making a slug that shoots well for everyone is probably not possible. Barrel bore, and the tune need to be factored in when designing a die/slug.
• If you use swaging lube its worth the time to washing your slugs after.

I'm not experienced enough to state any of the above with confidence but they tend to be true with my limited experience.



These are all the dies that I made before I got one that makes half decent slugs

哪位朋友有 3D 绘图？？

Hello Crew, Needing to know which route to go as far as hand pumps for a PCP Airgun. I dont have one just yet but im looking at a few currently and would like some more information since i cannot afford a compressor in my budget.

Does anyone know if you can switch the spring in a Cometa Fenix/Fusion to a gas ram?

Why not buy one with a gas ram you ask? Well, there isn't a lot of choice here in Canada and the retailer I am looking at does not have any gas ram rifles in stock and if I were to order one it would take a long time to arrive and likely be significantly higher in price. They do however have laminate stocked rifles I am interested in with springs and the gas rams and rear support cups in stock so I was wondering if it was a simple switch or if multiple parts needed to be changed, or not possible at all.

Also, is there a difference in the transfer port size between the .177 and .22 versions? I was thinking it might be nice to pick up a barrel in the other caliber and switching between them for plinking and hunting.

Thank you for the help.

For those of you who eat the squirrels you shoot, check out this video.

Hello Crew, Im completely new to the airgun scene and would like some help looking for a good starter air rifle. I have a budget of around 400-500 for it and that would have to include most everything. Is there such a rifle that can be found in that range fully kitted out and wont make alot of noise to disturb my neighbors? Its main purpose will be for squirrels, possums, and racoons as they are a big problem on my property.

It seems that this time of year really brings out the vermin! I caught a squirrel and a very large Norweigen brown rat in my shed the other night - both foraging for food! I got the rat in the evening with the aid of my Hikmicro thermal scope and the squirrel videos were take with the Hikmicro 4k LRF NV. The scope is mounted on my EVOL 15 .22. I didn't touch the viedos and the viewing in real-time is as good as the videos. The second squirrel only jumped up and was dead about 1 yard away. The other 2 squirrels were a couple days apart... all in my back yard. The scope zooms from 3.5 to 28 so it has a great range to find and then zoom in for better shot placement. It does pixelate at the farthest range, but is still very usable. AGM sells the same scope (almost) over here as the Spectrum LRF 4K.

For sale is this .22 cal Condor. It has a 24" Lothar Walther barrel and is very accurate. The air tank on this gun has a specially designed valve system that achieves very high velocities. So, if power and accuracy is what you are looking for, this AirForce rifle will not disappoint.

I bought two Condors, this one and an SS because I was not sure which one best suited my needs, and so this is the extra one. I only shot it a few times to get a feel of it, so it's basically new. My loss, your gain, it's a great deal!





I am asking:
$575 $550 $500 or best reasonable offer for the Condor and 1/2x20 adapter, shipped.
$180 for the moderator.
$45 for the ring lock valve pin kit.

I will only sell the available accessories separately once the gun sells first.

Mark Hooper <--Click on my name to message me

NOTE: I (Felix) am posting this ad for member, markhooper, who did not feel comfortable to navigate through the forum to post it himself.
So if you can please message Mark with your interest or questions, that would be great.

Is the plural of "Sheridan", "sheridie?
Anyway,I have two Sheridans with some odd markings, and maybe folks could tell me if these were made by the manufacturer, or placed there by some long departed owner. I can't figure out head from tail on these. There is no other marking on either rifle except the Racine stamp. I am kind of trying to figure out the vintage of the guns

Good eve. I have a air venturi avenger. 25 and h&n baracuda hunter 27.47gr shoot well but still looking for the most effective pellet or hybrid slugs for squirrel hunting recommendations please? Also hammer spring tension and reg settings for start? Thanks and merry Christmas

I would appreciate some insights on the reasons why individuals might prefer the M3 or M4 over the Krait.
While I have reviewed separate videos discussing each option, I have yet to find a comprehensive analysis that explains whether the higher price for the M3 or M4 is justified.

What are the key advantages that make these models worth the additional cost compared to the Krait, and what specific features or capabilities does one offer that the other does not?

Adapted another stock for my classic dreamline, don't need this anymore. Bought on here, in great condition. $150 plus shipping from 39183

Thanks,