I have an Evanix hunting master AR PCP pistol in .25.
after not using it for a while I can no longer get it to fill due to a leak at the filling site ( both hand pump and compressor) I do set in in the cocked position but no difference.Any useful tips without having to send it in for repairs? I’ve heard that spraying the seals with a bunch of silicone oil may help but I don’t have any sitting around

I'm trying to choose between the hammers or the bsa. Which one gave you guys had the best luck with? Thanks in advance

I got a carbon fiber 14 cubic foot tank 4500psi and was tethering my pbba .457 today and I took 3 shots and the tank was reading 0psi (the 2nd gauge on the tank that shows how much air went into your gun) it was at like 3000psi.. is that normal it doesn't do that with my .401 and .257 I can just keep shooting and shooting is the .457 using so much air the guppy tank can't keep up?

How do the private messages work? Cant find that button...

So the subject says it. ( lol ) I "need" another gun like a need another hole in my head but . . . I finally pulled the trigger and ordered one up from Tony @Talontunes. Keeping it simple I just grabbed one of the black synthetic stock ones. For those of you who have one - straight out of the box - am I going to be able to chuck at least 30g slugs at speed. Speed being 950+. My RTI P1 w/the latest RPB barrel is chucking 25g H&N HP II's at 965'ish quite well and that's "only" a 600mm barrel. Curious to hear from any of you who have one / had one how your experiences were with yours right out of the box. Thanks guys.

I have a new Benjamin Prowler, any pellet recomendations?

Crosman Piranha .177 pellets are to tight to clear the muzzle in my air pistol, can you reomend a good pistol pellet?

Because I felt I needed a wider stance bipod than the UTG Recon I have, I purchased the Accu-Tac FC4-G2 bipod. Currently using this bipod on a FX Maverick and a Daystate Red Wolf. But I found I don't like it as it's a too wide and not very portable for me. Yup, too many RMAC and EBR videos made me think this was the bipod for me...not. I'd like some input on a bipod that is more foldable to transport, but wider than the UTG bipod. I've been looking at the Scandinavian Arms Benchmark Bipod. Anyone using it? Thoughts? Any bipod suggestions would be greatly appreciated. And I'll be putting the Accu-tac on the classifieds as soon as I can find something that will work better for my needs. TIA Dave

Is it okay to use a Regman external regulator with my RAW 30 cal.? As is I am maxed out at 35 shots per tank fill.

I'm quite sure I am not alone in having an almost addictive need to purchase new, different air guns. Despite having a ridiculous collection, especially after factoring in all the scopes, ammo, targets, cases, slings, & upgrades/mods Ive done, etc., I STILL want MORE!! So my question is: do we really NEED more airguns; & if the answer is no, then follow up questions are why not & then why do you think we keep buying them, and if yes, why the need. Different hunting approaches, compactness for carrying, ammo size/cost, I mean I could go on & on? Hence my asking the greatest online forum of airgunners! Do we (or I) actually NEED more airguns? (Help me convince my wife, fellas!)

So, I have: Umarex.510cal Hammer, FX Wildcat MKIII .30cal, Hatsan Blitz .30cal, Hatsan Barrage .25cal, Hatsan Jet I .22cal & Jet II .25cal, Umarex Origin .22cal, Umarex HDR .50cal, two Umarex HDS68 double-barrel shotguns, Sig Sauer Virtus .22cal, Umarex HDX .68cal pump shotgun, Seneca .50cal Double Shot shotgun & .50cal Dragonclaw II, Umarex .50cal HDS pistol, Umarex Air Javelin & Air Saber air rifles, not to mention 7 BB guns/rifles.

So, ladies & gents- what's the verdict? When are enough air guns enough? Or are there ever "enough" airguns?? I have my eye on the Umarex Primal shotgun....

Not new to pcps, new to fx guns and regulators.
Today I received an FX Maverick, I aired it up to 250 bar and started watching tuning videos and reading tuning threads here. Problem is these regs don't seem to be doing much. Followed a thread on here from AEAC. With a full tank(250 bar) I can't get my first regulator over 100 bar. So I've made it to step 8 in this thread. Like a fool I didn't record the factory settings before hand. Any pointers or ideas?

Anyone owned/experiences with any of the heroic airguns products?

Hello,
New here and have a question.
Wanted to get back to air rifle shooting, so just recently I purchased an Air Arms 510s extra from an online vendor. The rifle was discounted as a rebuilt version.
It included a limited warranty and short return window. I also paid for them to shoot a 10 round test that looked fine.
It arrived and it looks like new, no marks of any kind that I can tell.
The issue is that it had about 100 bar of air when received, and now a week later it is almost empty, it seems to have a slow leak.
My air tank is getting hydroed so I can't fill it up yet.
Should I get it repaired under warranty, get it returned and get the refund and by a different gun ?
I feel I paid good money for it, so it shroud work without any hassle especially since it was "refurbished"
Long time ago I used to have an Air Arms TX200 spring gun, and it was an awesome airgun.

Did I make a mistake , What would you do?

Help, does anyone know the reason why my quick tune system keep coming out spring and all,it's the third time this happens, i can shoot 2 or 3 mags and then boom, the spring and plonger fly out on my table,
Thanks

I might be doing something wrong, but I can not get my ballistics table and holdover marks to match.

The blue line is where it should be

I have made sure
- I have the correct table uploaded
- I have the latest updates
- the gyro has been calibrated
- the range was taken from level
- all of my input data is correct.

Got a brand new fx dreamline classic in .22 and can’t get it to shoot over 350 fps. I have set the reg to about 125, played with the hammer spring tension and power wheel. But can only get a drop in velocity no increase.

Hey everyone,

I'm having a problem with my new 700 mm Panthera air rifle and could use some advice.

Basically, when I removed the air bottle for the first time, all the air pressure from the gun's plenum released through the back air tank port. It's weird because my rifle is still pretty new - I've only shot about 50 rounds.

I wanted to check the barrel for a carbon sleeve, as some folks online said their Pantheras were missing it. So, I started the degassing process by dry-firing, and that's when I noticed the air leak.

I followed a tutorial on YouTube to check the barrel, and I did find the carbon sleeve, but it seemed shorter than it should be.

When I put everything back together, all the air left in the tank leaked from the barrel.

I haven't had a chance to refill the air tank or research the leaks further, but I'm worried because this rifle wasn't cheap.

Has anyone else had this happen? Any ideas on how to fix it?

Thanks for any help you can offer!

Hi! If someone can help me. I was disassembly my M25 7,62 to clean and lubricate, when was time to take off the regulator valve of the cylinder It wont came out. It get stuck in It. I did want to force It. Anyone knows How to disassembly this parte?

Hey guys - subject asks it - anyone know what the size is? Mine broke and I'd like to replace it. I've just wrapped a bit of electrical tape around the tube for the time being but I'd just assume have the o-ring back in place if I can find the one. Thanks . . .

I am a little confused as to AoA labeling. Are the names Atomic and the Atomic XR interchangeable? Is it a different gun with less features in the " We the plinker package"?

Thanks

There are some YouTube videos on pcp maintenance, but not a complete tear down. I am looking to replace the o rings on a Taipan Veteran. Do you know of any videos, they do not have to be Taipan specific.

Is There a way to watch the replies and not get the entire thread responses?

Thank you

I'm planning to get a Crosman 1077 which I want to convert to HPA. I could get a standard 13/3000 paintball tank but they generally come with regulator pressures ranging from 800-850 which would decrease the power compared to co2. The alternative would be the Air Venturi which has an output pressure of 1100 psi. My problem is the difference in price. I can buy a standard tank for $45 and the AV would be $80. Now I'm wondering if it is easy to modify a regulator to have a higher output pressure. I'm not really experienced but if it's simple then I'd consider trying.

Hi. I have a new FX M3 25 cal. I have shot approximately 140 pellets since new. This morning it suddenly got loud and has an air leak. The leak is coming from what the parts diagram calls the pellet probe. It’s the part that pushes the pellet into the barrel. I loaded a pellet then pulled the side lever back to remove the magazine then closed again. I fired a pellet to see exactly where the leak is. It’s not sealing between the pellet probe and the barrel or power block. I plan to call Donny FL , however, its the weekend and I’ll have to wait. I was hoping someone here could give me an idea of what could have gone wrong. Should I assume that i will be sending it back for warranty or something I should probably just fix ? Thanks

I need a male adapter for my Omega 9L bottle I bought at AOA. I need it to thread to the regulator assembly and then another male thread to a SCBA compressor can someone help please?