Hi. I have a new FX M3 25 cal. I have shot approximately 140 pellets since new. This morning it suddenly got loud and has an air leak. The leak is coming from what the parts diagram calls the pellet probe. It’s the part that pushes the pellet into the barrel. I loaded a pellet then pulled the side lever back to remove the magazine then closed again. I fired a pellet to see exactly where the leak is. It’s not sealing between the pellet probe and the barrel or power block. I plan to call Donny FL , however, its the weekend and I’ll have to wait. I was hoping someone here could give me an idea of what could have gone wrong. Should I assume that i will be sending it back for warranty or something I should probably just fix ? Thanks

I need a male adapter for my Omega 9L bottle I bought at AOA. I need it to thread to the regulator assembly and then another male thread to a SCBA compressor can someone help please?

I’m new to air rifles but not new to shooting/hunting however raccoons are giving me a hell of a problem. I got the Benjamin trail np xl in 25 cal at the suggestion of air gun depot and am shooting jsb exact king heavy pellets at 33gr. I’ve cleanly dropped 2 possums with vital shots but raccoons are giving me some trouble. The first coon I took a clean shot to its lungs from about 20 yds and it dropped instantly, after about 5 seconds it got life back in it and scooted away faster than I could reload and take a follow on shot. I’m confident it’s dead but I’d prefer a clean kill… so I decided head shots only from now on. I had a coon tonight inside of 20 yds, put a clean shot at the top of its head (shooting down on it) and it didn’t even drop, just grunted and scurried into a bamboo thicket. Is there a sweet spot to hit on raccoons OR should I look to swap out pellets or to a different rifle?

what would you say is an average time you spend on a full tune ? new parts, spring at a specified FPE , polishing all parts , adj. trigger , do everything for the smoothest cycle .?
I realize it has a lot of variables as to what gun .

Is this model suppose to be so weak? I can easily see the bb fly through the air and it doesnt really ping anything. It doesnt even really dent aluminum cans. I got this rifle a while back but never really used it.

anyone know if you have a Fx dynamic is any good?

Hello all first post random question…

I have an Impact M3 compact and I shoot pellets only in .177 and .30 in 500mm with superior stx barrels.

I have first regulator at 155 factory and my second at 110 which I have heard is basically as high as you want to go with the stock hammer. This is my starting point for .30.

Here is the question. I shoot a lot from in my house out to about 25 yards in .177 in my backyard from my kitchen table and have been keeping my second regulator set at 110. I then close the valve to somewhat above the velocity I want for the pellet I’m shooting and then lower hammer tension to dial in the speed. I understand this is prob very lazy however I can literally pound a nail in a board from 25 yards. I am wondering what the disadvantage is to tuning the gun this way?

I just picked up an old Weihrauch HW77K .177. It is shooting around 800 fps with 8.44 grain pellets. Is this about normal for this rifle?

I'm wondering if anyone has had these upgrades done to their mk2 .35 cal 800 mm. And what to expect. Thanks

Max recently broke valve seat, JTS replaced under warranty, new one broke after a dozen shots. No response from JTS for purchasing another so looking for suggestions. Does anyone make these out of stronger material? Thanks, WM

Has anyone seen this on any Weihrauch before? I just bought this .177 HW30S in Canada. It’s S/N suggests 2017 year manufactured. The gun was pirchased as new. It is shooting incredibly well out of the box. I just have no idea what that inscription might mean. see pic of the inscription, and 5 shot groups 2nd time out at 25 yards. I mounted a Hawke 2-7x32mm Vantage AO, Sportsmatch 2 piece 1” 11mm dovetail. Thanks for any comments!

I found the article very informative about replacing the seals on my Crosman 760. I also found out it was made in July 1970. Thank you. After replacing 3 of the 4 seals and reassembling the BB gun, it still will not pump up and hold air. The 4th seal in the replacement kit just did not look compatible. I noticed when I took the brass valve apart the spring was corroded a little and only one plug came out. It looked like another piece was still up inside. Any suggestions?

Would anybody have a list of all of the o-rings to the 177 caliber Akela ? Seems that Crosman does not list them and I didn't even see a PDF site like they had before for any of their guns. I also did a search on AGN and GTA. Would like to buy them in bulk and not in a kit before or when I have a problem with the gun. I know my last resort is to take it apart and measure them. Someone, anybody ? Thanks in advance Darell

Got my new stoeger xm1 bullshark aka snowpeak p35 the other day. First thing I noticed was this gun is very very inconsistent

Checked the hammer (factory oil was very sticky) cleaned off the factory oil still very inconsistent.
So I decided to take the whole thing apart which is very easy to do just a single bleed screw.
I found the regulator was cover with silicone grease. Cleaned those off the reg and lowered the regulator setting a bit.
This is what I am getting after. Had to lower the hammer spring as well to hit that 900fps magic number with JSB 18.13gr.

8 shots group at 25 yards

Has anyone tried the Notex piston seals (made in Germany)? Thinking of trying them out on an HW90 as I'm having trouble locating a replacement Vortek. Apparently they're CNC machined (not injection moulded) and
of course molly infused.

The regulator is set around 150 bar I noticed the Guage dropped pretty quick if it's colder outside and messed up my Fps and accuracy. Is That normal?

I took my son to shoot my FX Impact MK2 and he double loaded pellets which got stuck in the barrel. I have not been able to remove the lodged pellets and have a liner on order. FUN.

The bigger issue I’m seeing though is my rifle no longer is doing bolt hold open. What is the mechanism that does bolt hold open when their is no magazine and no pellets in the magazine? This seems to be not functioning as well.

So I bought an f4 177 for my daughter and a ruger 22 cal air rifles . I have turkey that come through every opening weekend and get one every year. I killed a Tom last year one shot in the head at about 20-25 yards. This was with my daughters 177 as I find it is way more accurate than the ruger. Of course only with certain type of pellets. I had tried many and the best for that gun is the flat tipped
Anyways I’m getting offf topic. I decided to clean them today and looking down the barrel of the f4. After you beak it open with a light from the other end the bore is no longer round. It looks like a football shape with the points up and down. Best I can see is the baffle is out of place and someone slid into the bore half way blocking the bore. I just sighted it in and it’s dead on. I’m guessing this happened on my last shot . Has anyone had this problem?

Im looking for advice,I'm new to fx ,Here is how it looks. Shoots pellets at 850 should anything be changed? , and do the adjustments look ok? They look turned up mostly so I expected more
View attachment 443527View attachment 443528View attachment 443529

Im looking for advice,I'm new to fx ,Here is how it looks. Shoots pellets at 850 should anything be changed? , and do the adjustments look ok?

Have old 1981 daisy 880 that I'm trying to restore. Didn't have a safety. Ordered daisy safety button kit with ball and spring but doesn't seem to work. If I put the spring in the trigger guard, the safety will slide but then the ball will push up into the hole in the safety and then just bend the spring when I try to move it back. I'm thinking this can't be original design. Also doesn't clear the firing piece that it is supposed to engage. Hope that all makes sense. Please let me know if anyone can tell me if design has changed and are old buttons out there. Thanks.

How much did your setup cost?
How often do you use it?
How often do you perform maintenance?
How reliable is it?

I purchased what was shown on the Great North Gun Site as a HW30s. It arrived today but I’m really wondering if it is. It came in a Weihrauch box with a SKU and description as a HW30s (see pics attached) but the gun has no checkering On the grip or forestock. The GNG site has good reviews. Are there any HW30 or HW30s users out there that can help clear up this mystery?

IS ANYONE HAVING A PROBLEM INSERTING PICTURES KEEPS SAYING OOPS ERROR TODAY ?
THANKS LOU

Let's see those targets and what distance, also what pcp. The 200 plus meter range, 1st at 70m ,2nd 100 m sight in, 3rd 140m ,4th 160m, 5th 200 m, Texan 308, NSA 120gr