Anyone knows if Benjamin Marauder magazines work for WAR rifles? I was told that they should work fine, but before I go and order a bunch of them, I wanted to confirm this. I know that this is a very rare rifle and the company which made them went out of business, unfortunately, but I saw several AGN members still have and happily use them. Please advise folks, your help is very much appreciated!

In order for me to complete my profile, can someone direct me how to complete the last step ?
TIA

i never herd back from him?it was about 8 or 9 days ago? i don't no if he got it fixed or not.I mailed it for free"i caint find his add. eather?

I don't no if these were for Migets or what? i never seen any Migets diving in sea hunt? it says 3000 psi?

I have a problem with my LCS SK19 after following the Airguns of Arizona seal replacement video:-
1. The gun fires once only after it is re-powered .
2. Upon re-powering the mag lever gets stiff and locks the rotation of the magazine ( as it suppose to be).
3. After first shot , the trigger stops working, the mag lever loses power and the magazine can rotate without opening the lever.

I suspect the problem must be some type of alignment with the mag lever , rotation of the magazine and power/air being driven to rotate the magazine .

You can see a short video I did below.

Can anyone assist ?

Thanks in advance

I have a new to me T05 .22 Diana 48. I got it in a trade with a friend that had it sitting around with a broken cocking rod (first side lever I have ever shot).

My question is on your guy's Diana 48 do your have that much of resistance when closing the lever after cocking (@ 7:48)?

I have my rod adjusted and buy turning it out 1/2 a revolution my lever will pop like in the video, but I do see the rod bend/warp.

I think someone had one on here?

I need help i got a orange spritech compressor that i lost the air holes in need of a holes and body got a link so i can order one please help squirrel hunting is around the corner

Hello; recently bought the King Arms 11 inch Buntline. Never had an Airsoft. Load the Green Gas in the grip. Diagram shows loading gas not at 90 degree angle but slightly “ flexing” the green gas can. Reminds me a bit of filling a lighter. Have successfully loaded a couple times- unsuccessfully a few times.
Gas sometimes flows out from side which would seem to indicate full but doesn’t necessarily mean it is.

Any thoughts and/ or help.

Thanks

Any help would be appreciated thank you

请告诉我那里的问题

Thanks Willy,i wonder where they went?

Been poking around, and found this - Bottle, any reason that won't work for an Umarex Gauntlet or Umarex Notos for field refills? Capacity is about 122 CI for the bottle. Any warning flags about the mfg?

NOT DOT approved - so nobody is going to fill it - I've got my own compressor so shouldn't be an issue. Looking for 2-3 bottle refills for either of the rifles - seems like this would work for that - correct?

Hi, new and need of help I'm trying to get a valve spring washer for a Benjamin 347,but they seem as rare as rocking horse sh** does anyone know the dimensions please

Gimana cara nya untuk belanja sperpart senapan angin fx impact mk2

I have filled my bottle to 220 bar and attached it to the gun, I then try a dry fire and there is no air release.
The rifle was taken apart to the main components recently this is removing trigger mechanism, barrel, stock and reassembled.
Can anyone guide me as to what might be the issue and how I can rectify the situation.
Thanks

i knew there had to be more than one! staying up late manning the tripod in the window paid off .. we're clearing the threats lol .. this one was textbook, dropped like a sack of potatoes .. i did the humane thing and made it quicker for him .. dumped the whole mag in him ..

I recently bought a used WC mk3 22 cal. Trying to shoot fx atomic 15.9grn. I can’t get the WC to shoot past 800fps. I’ve increased the reg from 80 to 150 and adj hammer accordingly. Also swapped from 500 to 600mm…no change. Also put a power plenum on and still no change. I switch the 600mm from pellet to slug and still no change. Any suggestions what it could be? Thanks

I wonder...
If I'd drill a set of sling studs into my brand new Gamo Replay Magnum stock void the warranty? Or only if I interfere with the mechanics?
Anybody has any experience with this?

So I ordered a few boxes of NSA .22 20 grain .216 through .218. I’ve found my m3 compact likes the .218 in the heavy and pellet barrels most. Or at least I had the best accuracy in .218. Anyway when I increase the weight of the slug the length will increase also. So should I lock in on the .218 for all weights or try other diameters in different weights too? Not sure if the length of the projectile may affect how much the barrel will like to “hug the slug” if you will.

I have come into possession of what looks to be a carbiine style air rifle. There are no markings any where, other than near the muzzle end of the stock I see "Normal - HOP". Normal as an arrow above it pointing towards the muzzle and HOP has an arrow pointing back towards the action.

Thank you for any/all help

I have some photos -

I have an AEA HP SS .30 with the 165cc air tube. I was thinking about adding a Huma internal regulator. I'm thinking that if I do this, I can fill the air tube to 3600 psi but have the regulator set for about 2800 psi for proper semi-auto cycling. That should give me a good shot count and better reliability. The main thing I am hoping for in this is to get 2 magazines (18 shots) at 2800 psi. Is that possible?

Also, I love the look of my AEA just the way it is. I don't want a larger air tube or bottle. I got this because of how compact it is.

I can't find any information on this idea. I have not found any posts or videos of anyone regulating a 165cc air tube. Is what I am thinking feasible? Has anyone out there tried this?

What's the best springer for pests at 50yards? Probably spent 12hrs over the past couple days researching PCP's and just seems like I'm gonna dump 1k before I even get going. Probably spent 4 hrs researching springers today and I'm so lost in the sauce. One minute I was looking at Hatsan 135 QE Vortex in .25/.30, Then various Gamo's in .22, and almost pulled the trigger on a Beeman R9 but then starting reconsidering cause we do have some racoons and plenty of armadillos that destroy my 2 arces.

I would like to buy a filling station for SCBA tanks with a quick bleed valve –– or a bleed screw that goes EASY IN and OUT.


I have one filling station that has a "button" on it, the quick blead valve. I give it a push with my thumb, and in one violent Pfffft all the air in the line is gone. EASY!

The other filling station I have is a (China-)pain: It has a bleed screw. I need to unscrew it hard, it hurts, I don't like it at all. And that despite the fact that the screw is large-ish and has 3 blades to apply the force of my fingers better. And as people with whom I shake hands at times confirm: My fingers aren't weak.
That filling station model is pictured below.


QUESTION:
What filling station can you recommend me, where bleeding the hose isn't a chore?



Another QUESTION:
Excuse my ignorance:
I use a 500cc alu bottle taken from an FX Royale,
and
I use a standard SCBA 9L tank.
The filling station that I would like to buy: Will it fit into either of these tanks? Or do they have different threads?



Thanks.
Matthias

Hellow everyone! Need some help with fx panthera and how to degas the riffle after I've shot it around 6 times and the air still doesn't want to flow out of the plenum? Don't want to keep shooting it it's under 90. Don't want to damege valve pin again.