Can anyone give instructions or links on how to de-gas AEA Terminator .357? Thank you

Hey everyone. So I have the umarex hammer and I love the thing but it’s just soooo loud. What’s my best option to moderate the sound. I’m seeing silencers but they only go to .50 will those work on the hammer even thought it’s technically a .51 cal air rifle ? I found these online. On the Donny fl site it shows all his silencers as discontinued.

Is there a best way/place to sell... MOD EDIT: removed a list of selling items.

Any advice is appreciated.

New Umarex Gauntlet V1 depressurizing in a week.

Is this normal? Filled to 3000psi, and a week later, back to 0 psi

Hey all,

New to the pcp game here. So I noticed last time I was pumping, I would pump up to 3000psi like normal and when I bleed the hose on my pump I would lose around 1kpsi. Now, when I bleed the hose on my pump, all of the air just comes out and it goes down to 0psi.. not sure what is causing this problem. Any help would be greatly appreciated. Thanks!

Does anyone know how to remove the moderator from a Notos ?

Hello, everyone,

Has anyone ordered Immersive Optics 14 X 50 from Sports And outdoors - Enrils? They claim that they have stock on the webpage, and they will ship within two weeks. My order has not been executed for more than two weeks. I have written several emails to check the order execution status and have not received any reply. It seems that this company does not exist. Has anyone encountered this situation? Please share your experience, thanks!

ola a todos, tenho pouca experiência com PCPs e venho pedir ajuda. Comprei um RTI Prophet l .22 de segunda mão com um cano RPB-1, o regulador estava em 170 bar disparando balas HN 23gr .218 a 990 fps mas o gatilho era muito pesado, então ajustei atirando com um cano vazio , de repente notei que perdeu força, colocou uma bala e atirou e a bala não saiu do cano. Desmontei uma arma para procurar o problema que não consegui encontrar. Remontei tudo e quando dei o primeiro tiro a bala saiu, coloquei outra bala e ela atirou com mais energia mas não a 990 fps. Em seguida, tentei várias voltas para frente e para trás no tensor da mola do martelo e ainda não consegui mais de 850 fps. Eu removi o regulador e relubrifiquei sem sucesso, a velocidade permanece em aproximadamente 850 fps, então pensei que o manômetro do regulador poderia não estar lendo corretamente, disparei balas até que a pressão da garrafa igualasse a pressão do regulador e, quando a pressão da garrafa caiu de 170 bar, as balas pediram a viajar mais devagar. Neste momento não sei o que pode estar a correr mal e por isso peço a vossa ajuda. Agradeço qualquer ajuda e desde já agradeço.

I'm attempting to repair an old BSA Supersport air rifle. It's been a while since I took it apart and I'm having trouble reassembling the trigger mechanism.

Hi. When adjusting (lowering, my goal is to start at 1400 psi) the regulator pressure setting, I understand the air tank needs to be emptied. When filling, the product manual indicates filling to 4500 psi, however I don’t have that level of air pressure currently available. Is close to 3000 psi sufficient? Is the key to fill above the regulator set pressure? Thank you.

New to slugs.whats a good lubricant

Anyone know if this site is legit?

Hey guys,
Hope everyone is doing well. Calling all Hoosiers to please chime in
So wife and I recently moved to Indiana (Marion county, Carmel/Zionsville/Fishers area) and as a new (excited) resident I'm kinda lost and I have no clue as to where to go to enjoy my hard earned Redwolf that has been locked in its case for months. I'm hoping for some friendly advice from fellow Indiana airgunners please: can anyone here guide/recommend any state forests, FWA's, open fields, shooting ranges/clubs literally anything/anywhere that is airgun friendly?? I realize that I'm centrally located and would need to travel and so I WILL, just please tell me where lol..
Any and every advise, tip, guidance, recommendation helps and is truly appreciated! Thanks guys for your help and support and have a beautiful weekend.

Ari

First pic is my valve body. The slit keeps huma air spacer from sealing. I tried the option a and left gauge block in with front oring off. Leaked like a siv. With front oring on gauge block it seals fine but im guessing the reglator isnt working correctly.

Second pic is the smooth gauge block I need. Anyone have one to sell me. Or swap. This is a high flow valve body.
Hope this makes some sense. Thank you.

Will be replacing the stock 14" barrel on a Crossman 2289 Backpacker with a 24" barrel increase the velocity (fps)? And if so, by how much? Only mod so far is a steel breech, and brass barrel bands. I've asked in all of the Crossman Facebook groups, and haven't gotten an answer.

Had a CS3 which I've just returned. Ran 4-5 times. Filled a Gauntlet from 0 to 3000psi. Supposed to get to 4500psi, no matter what, auto shutoff at 3000psi. Could not fill Akela from 2500 to 3000psi. Contacted mfg (no support from Amazon seller), and they wanted me to disassemble (brand new unit) and take a shutoff wire from the gauge to test the gauge. Filled out return info 5 min after that.

So I need something that will handle up to 4500psi (future "growth"). Light use, these are target/plinking/small varmint use - I'm not filling bottles, and not shooting hundreds of shots when I shoot. Shooting once or twice a month.

What can be recommended in the $400-500 range (or less), that will last a few years for this purpose? And, if possible, post links to your suggestion(s)

Hi, does anyone know where I can get a complete rear sight for the Daisy 717.
I've tried most gunsmiths and none have them. I may also be interested in one that is defective.

Thanks
Arvid

I’m an experienced powder burner shooter, but have a few “very basic “ questions about my HW30.
1. Is there a safe way to uncock the rifle or is loading a pellet and discharging it the only/best way?
2. Is cocking the rifle the easiest way to get access to clean the barrel from the breach? This is why I’m asking question #1. I’m using a Patchworm and Ballistol.
3. What and where are the lubrication points? Use oil, light grease, or Ballistol?
I love the gun, it’s lived up to everything everyone on this forum‘s has said, e.g., easy to cock, very accurate, outstanding build quality. Thanks in advance for your comments, Tom

Hi guys I have a daystate mk3 just wondered how they are regulated? Meaning are they mechanical or electronic. Also has anyone fitted a heliboard on their mk3?

Thanks

Hi guys anyone know where I can purchase a daystate programmer?

EDIT: For anyone who comes across this thread and would like more detailed information on all of the answers below, here in another great thread on the subject:
https://www.airgunnation.com/threads/tuxing-filter-which-one-for-yong-heng.1271604/

ORGINAL POST:

The answers to these questions might be very simple:
"Use a large desiccant filter when filling tanks." (like this?: https://www.amazon.com/dp/B08LKYXBYS)
and
"Depressurize the tanks, remove valves, poor out water, let dry."

But I'm curious if there are other methods, and what specific products/methods other people use. I want to learn how take good care of all my equipment.

SPECIFICS:
I have a compressor from Amazon called the GX CS3 https://www.amazon.com/dp/B0819ZH85H
It has been working well for over a year. I use it to fill a 100cc Air Venturi tank.
Recently the humidity on the Southern California coast jumped much higher than normal for a few days - to around 80-90%. It's usually very dry. I used the compressor a lot on these humid days. I noticed that it was getting much more difficult to twist open/close the valve on the AirVenturi tank. I was also noticing a little water dripping from the fill ports after filling the gun. And when I bleed the line there's a very visible spray of fine mist condensing in the air and/or being released from the line.

Thanks for any info/suggestions.

My M3 leaks out the barrel from about 230 down to 200 or so. It shoots well and at a certain point it will usually stop by itself. More recently this past Saturday while shooting a 100 yd match, it would make a light pop sound,like a little burp and be leaking out the barrel. Accuracy doesn't seem to suffer as I had two groups of 5 shots in the ten ring and nothing worse than 8, even missed one shot and scored 447\500.
Now, if I close the valve adjustment to zero, the leak will stop. Sometimes this tops it even after I open the valve to almost 4 open, other times, it just starts leaking again. I have replaced all the O rings and the valve rod and seat as well with no improvment. I did recently add oil thru filling air plus a couple small drops into the breach. I even removed second reg gauge and put in a couple small drops of oil just to see if it would solve the problem. I can't say for sure this helped or not. If it did, it was short lived. Any ideas?

NEWB here. Great looking website.
I picked up a Barra Cowboy 1866. It doesn't hold air. During each pump I can hear the hiss of leaking air near the "bolt".
I have the "bolt" as far back as it will go and the safety on.
Any advice what might be the problem before I start taking this thing apart to investigate?

I recently purchased a hatsan factor RC,
When I go to fill it up, it leaks rapidly out of the hole that the pellet gets pushed into by the bolt. I could hear the air coming out. when when I leave it sit completely empty from 200 bar in less than 10 mins.and that's all the gun will take is 200/300. It won't fill all the way. I get to shoot 2 mags as fast as I can before it's drained down to 100 bar/ yellow. PLEASE HELP ME. IM NEW TO THIS!!!

Can someone tell me what the shroud adapter thread size is on a gen 1 vulcan?
I’m looking for the the male thread that goes into the shroud itself. Not the 1/2x 20 end.