FX Impact 700mm Barrel Tensioner Kit W/ Front Rest | Pyramyd AIR
We've got a great price on FX Impact 700mm Barrel Tensioner Kit W/ Front Rest at Pyramyd AIR. Shop where the experts do!
www.pyramydair.com
Tuning impact front rest ??
- Thread starter peterj59
- Start date
Don't really understand the "front rest" (tensioner?) reference part of the kit. I have 2 of what you see in the photo. I thought I read here that the new M3's came with the tensioner installed, but not sure. If I was to guess, I would say the "front rest" is referring to the "tensioner" replacement front block piece of the kit. My opinion, after my modifications and additions to the same end, is to investigate the many options and experiment to see what works with your M3.
Patrick
Patrick
Upvote 0
Dang no wonder the kit with clamp is so expensive. You're almost better off getting the full kit vs just the clamp. Thanks for the part #. I haven't proved it but I think the stock shroud with a spacer works as well as the carbon tube.
Upvote 0
Upvote 0
I bought the Bullet Central Carbon Fiber Barrel Tensioning System with Shroud. I liked the fact the the tensioning tube fits the OD of the barrel.
My groups have definitely improved.
www.bulletcentral.com
My groups have definitely improved.
BC Custom - Carbon Fiber Shroud & Tensioner Kit - Bullet Central
www.bulletcentral.com Upvote 0
any way of removing the old block without removing the barrel, it looks like if you loosen the top bolts you can just slide the old block off
Upvote 0
Probably but you still need to remove the scope and mount to get to the screws. Also the screws behind the barrel mount need to be loose to make it easier.
And the shroud needs to come off, easy enough to pull the barrel, 1 additional set screw.
Upvote 0
So its not a tough job to pull the barrel, maybe ill just do that when my fx tensioner comes in, thanks for the infor
Upvote 0