Did this Turkish tomahawk for a friend and gave him the gun!
Mike E.
Mike E.
The one you built me in .20 is both beautiful and accurate. One of my favorite rifles. You are a excellent airgun smith my friend.Did this Turkish tomahawk for a friend and gave him the gun!
Mike E.
The .20 LW barrel have minimum pellet to bore contact / not sure on the chokes I would have to see, its been a while since I looked at them are you wanting one with a choke I can check for youWhat’s wrong with the other barrels.. are they SNUG. ? Tight chokes. ? I would like to rebarrel one of my guns and need. Snug choked .20 cal.
Hi DeanMy Tomahawk will shoot dime size groups with JSB 18 gr pellets at 32 yds, its a squirrel killing machine. John in PA did a tune on mine in turn I gave him a extra .22 Tomahawk I bought when they clearanced them out, got luck and got 2 with super nice wood.
Gas ram would be pretty neat on one.
Yes a choke. …. or snug all the way.. I only need 14 good inches but has to be at least 15 mm od if it’s 16 I can turn it down.The .20 LW barrel have minimum pellet to bore contact / not sure on the chokes I would have to see, its been a while since I looked at them are you wanting one with a choke I can check for you
they are not snug they have minimal pellet to bore contactYes a choke. …. or snug all the way.. I only need 14 good inches but has to be at least 15 mm od if it’s 16 I can turn it down.
They are garbage then.. was gonna do a Longbow ..they are not snug they have minimal pellet to bore contact
what gun were you going to rebarrel ?
Good to see you on the forums. Mike To tell the truth I didnt even ask what he did, it shoots hard and with a solid thump..it buzzed like crazy before he messed with it..love the way these guns point and feel in your hand. It shoots JSB pellets with a SD of 3 fps or less.. Kodiak HP 18.1 gr with 4 fps SD. Quiet a few others under 6 fps SD. Mine is shooting around 17ft lb.Hi Dean
yes its either good or not so good the luck of the drawl, did John make a custom spring guide for it ?
Septicdeath above was the one I did with the O ring piston cap that turned out fabulous my elevation was I was getting 820 830 fps just outstanding/ great to here from you![]()
The Dime size groups at 32 yds is phenomenal, I mean WOW you could not ask for more/Good to see you on the forums. Mike To tell the truth I didnt even ask what he did, it shoots hard and with a solid thump..it buzzed like crazy before he messed with it..love the way these guns point and feel in your hand. It shoots JSB pellets with a SD of 3 fps or less.. Kodiak HP 18.1 gr with 4 fps SD. Quiet a few others under 6 fps SD. Mine is shooting around 17ft lb.
those barrel I bought off ebay from Dennis Quackenbush , I never checked them they sat for couple of yearsThey are garbage then.. was gonna do a Longbow ..
but if stock from Lothar Walther has been bad, I might use a HW ,OR WAIT …
I have a .22 webly vulcan barrel I would need to clean the bore first then check the pellet to bore fit would that work for your long bow? if so I'll check the bore for youThey are garbage then.. was gonna do a Longbow ..
but if stock from Lothar Walther has been bad, I might use a HW ,OR WAIT …
Thank you. I appreciate a positive comet usually you get nothing in air gun forums ,like on air gun warriors I'll get over 300 views and not one person would leave a comet, nothing, 0, Zip LOLWell done video. You obviously know what you're doing and explain things well
It shoots at around 837 fps average. Sweet cocking cycle. And very accurateHi Dean
yes its either good or not so good the luck of the drawl, did John make a custom spring guide for it ?
Septicdeath above was the one I did with the O ring piston cap that turned out fabulous my elevation was I was getting 820 830 fps just outstanding/ great to here from you![]()
I forgot the one I did for you was a .20 cal I was thinking it was a .22 no wonder I thought it was outstanding still the 837 is also good for .20 calIt shoots at around 837 fps average. Sweet cocking cycle. And very accurate