FX COMPLAINT FOR FX AIRGUN COMPANY! FXlinerkit impact 4,5 700 mm sniper tensioned without CF sleeve!!!!

[Stubbers]

Yes... It is in the sealed tube

It's likely a mix-up of kits from what it appears. FX is involved in so many markets with so many sku's, not saying that is okay, it's the simplest explanation.

You received 3 parts in yours?

 

[Jay308]

This is the same nonsense where they shipped Mavericks (2), can't say for others, with a 0º rail instead of a 20º rail, I've mentioned before their numbering system sucks and it leads to mistakes. I use to work for a rather large organization, the USAF, lots of part numbers that left zero doubt as to which part/tool was which. Even after that drawings had revisions the corresponding parts had a revision number.

USAF guy here too. I worked on Fighters, probably why I’m weird about exact specs etc lol

 

[gendoc]

i thought Earnest Rowe was selling the CF sleeves with 910 airgun ??
thats where i got all my CF sleeves.........maybe thats considered (old-school)
but they sure work very well !!

 

[HogKiller]

USAF guy here too. I worked on Fighters, probably why I’m weird about exact specs etc lol

I pushed parts among other things for C141's at Travis. FX drive me crazy if they change the twist rate there should be a XXXXX-24 or XXXXX-18 etc. the rails had NO number on them, seriously????

 

[radjabatak]

It's likely a mix-up of kits from what it appears. FX is involved in so many markets with so many sku's, not saying that is okay, it's the simplest explanation.

You received 3 parts in yours?

From the tube I received barrel holder (clamp), barrel tube (inside supposedly heavy liner and CF sleeve), pin probe, and CF tube that will replace the original shroud... And I don't check inside the barrel because I trust the qc and FX reputation, until the seller called and tell me the bad news..
If it is mixed up kits then why the seller told me all the barrel kit come to Indonesia without CF sleeve? It is very bad qc for sure and hurting customers!

 

[radjabatak]

I pushed parts among other things for C141's at Travis. FX drive me crazy if they change the twist rate there should be a XXXXX-24 or XXXXX-18 etc. the rails had NO number on them, seriously????

Hello @HogKiller do you experienced the same with me on the other parts?

 

[radjabatak]

I already filled the "support form" On their website... Let see what they are going to reply about this problem...

 

[Thach2264]

Where’s the FX representative when you need them?!?!

Never mind, they only appear when they have new products to sell

 

[Trucker3573]

Where’s the FX representative when you need them?!?!

Never mind, they only appear when they have new products to sell

Or were actually “around”. Pretty sure that was FX USA that responded here. They were actually quite helpful and good. Unfortunate they are no more.

 

[DesertSilver]

Where’s the FX representative when you need them?!?!

Never mind, they only appear when they have new products to sell

Get ahold of Utah Airguns. They took over for FX USA.

 

[radjabatak]

UPDATE
@ 3 November 2023 They reply my email and I hope the sleeve will not take months for it to arrive in indonesia... They Just say sorry and like the companies that have bad customer relation they will just forget it and do nothing about the quality check...