Lightest 30 caliber projectile. Anything below 44g?
- Thread starter Chard
- Start date
That's the lightest I've seen too and I've looked hard.. didn't know if there were any I missed..thank you 
Upvote 0
D
Deleted member 25487
Guest
.300 | 43.8 Grain | Slug $0.106 /rd
43.8 grain, 30 caliber hunting and target pellets. Newest slugs from high speed machine. Swaged from soft lead to give excellent expansion for effective and responsible hunting. This pellet is sized .300 with a hollow point nose and dish base, 43.8 grains. Lenth is 0.305" Diameter available in...
nielsenspecialtyammo.com
Upvote 0
Great. Thanks.. but I'm wondering if there is something in the 30ish grain.. I am thinking not..300 | 43.8 Grain | Slug $0.106 /rd
43.8 grain, 30 caliber hunting and target pellets. Newest slugs from high speed machine. Swaged from soft lead to give excellent expansion for effective and responsible hunting. This pellet is sized .300 with a hollow point nose and dish base, 43.8 grains. Lenth is 0.305" Diameter available in...nielsenspecialtyammo.com
Upvote 0
I have a uragan that is not tuned very hot but I love the shot count. Just trying to get a little more velocity without increasing power output.
Upvote 0
Do you cast? NOE has a 46 grain mold. You could mix in some tin and lighten that up a good bit.
Upvote 0
D
Deleted member 25487
Guest
Might give Franco a shout and see if he can make you something that will work.
www.airgunnation.com
Projectiles - Custom Made Slugs .22 / .25 / .30
Hi Airgunners ! I make slugs in .22 , .25 and .30 in different weights for PCP’s . They are swage , not cast , from lead wire . The slugs can be hollow point or , flat tip for distance and penetration . The slugs base is a cup for .22 and , for the .30 is a dish . The price starts at $0.05...
www.airgunnation.com Upvote 0
Thank you. I just saw this and messaged him.Might give Franco a shout and see if he can make you something that will work.
Projectiles - Custom Made Slugs .22 / .25 / .30
Hi Airgunners ! I make slugs in .22 , .25 and .30 in different weights for PCP’s . They are swage , not cast , from lead wire . The slugs can be hollow point or , flat tip for distance and penetration . The slugs base is a cup for .22 and , for the .30 is a dish . The price starts at $0.05...
Upvote 0
They are not listed for sale currently but Griffin used to make 30 slugs called super lites that had a polymer ball inside. Could ask if they still have any?
Discussed here:
Griffin slugs
I have been shooting the Griffin Slugs .30 Caliber LDC SUPER LITE 31 – 39 Grain Cup Base . They have been great at 30 + yards, the full distance of my backyard range. 1 inch groups. And you talk about expanding. Must be because of the bead insert. I'm using them in my Hatsan 130QE. The...
www.thehighroad.org
Upvote 0
I think I've once seen some FX 39 grain HP slugs in .30 cal... Hold on, I'll try to find them again. I was going to buy a Hatsan 135-S Carnivore (.30 cal) a few years ago and I was trying to get the flatest shooting projectile for it, something below 40 grains, but couldn't find anything of a sort, with the exception of these FX slugs (39 grain), which I couldn't order from anywhere, since they were near non existent. Therefore, I've opted for a 125 in .22 cal. instead, which was a far-cry from those 45 Joules of power... Shame.
There, found them!
The ones in the lower left corner: 39.5 gr
There, found them!
The ones in the lower left corner: 39.5 gr
Upvote 0
Of course as soon as my gun likes the griffins super lites they discontinue them I may reach out to see if they will let me order in bulk. Pricey buggers
I may reach out to see if they will let me order in bulk. Pricey buggersUpvote 0
What size were they?Of course as soon as my gun likes the griffins super lites they discontinue them
Upvote 0