Does anyone know for certain how to remove the AirBug's muzzle device? Is the Airbug's barrel threaded like the Chaser? If threaded, is it RED loctited on there like the Chaser's moderator? If it is possible, I would like to use a Diana moderator (same unit the Chaser "factory" rifle barrel has) on the Airbug pistol.
Diana Diana AirBug Muzzle Protector Removal
- Thread starter CBKidd
- Start date
Mine has a grub screw behind the front sight. Loosen it enough and the muzzle device and front sight simply slides off. No loctite seemed to be involved. I just removed mine to put a barrel band on. Easy job, less than 5 minutes.
Upvote 0
I've got 3 Chaser pistols and none of them have a grub screw holding the front sight on. Looks like the sights are loctited on. The muzzle caps are not loctited and simply unscrew. The muzzle caps are screwed on the barrel and if loctited on, will prevent the front sight from being removed even if it's loose.
Last edited:
Upvote 0
i am going to have to seen everyone to Snowpeak School LOL
the Bandit and Chaser have plastic front sight that are indexed and are friction fit
the Airbug has a metal front sight with a removable blade but as mentioned a grub screw on the bottom side and i don't know if it threaded but i doubt it
Airbug and Chaser barrels are the same the Bandit barrel is also the same but 1.2 inches longer for the HPA tank
so you can use a silencer on the Airbug barrel with its 10mm-1 thread or get an adapter to use 1/2-20 threaded units
i use these very inexpensive adapters
https://www.ebay.com/itm/285088594905
the Bandit and Chaser have plastic front sight that are indexed and are friction fit
the Airbug has a metal front sight with a removable blade but as mentioned a grub screw on the bottom side and i don't know if it threaded but i doubt it
Airbug and Chaser barrels are the same the Bandit barrel is also the same but 1.2 inches longer for the HPA tank
so you can use a silencer on the Airbug barrel with its 10mm-1 thread or get an adapter to use 1/2-20 threaded units
i use these very inexpensive adapters
https://www.ebay.com/itm/285088594905
Upvote 0
My Airbug barrel is not threaded. Loosen that grub screw and point the gun muzzle down and the front assembly literally falls off.
Upvote 0
my mistake on the Airbug they are using the CP1 barrel and that makes sense because that is the CP1 front sight i beg your pardrone
Upvote 0
Upvote 0
Upvote 0
Upvote 0
Upvote 0
Upvote 0
Upvote 0
Upvote 0
so, i am not sure what that is all about
but
Chaser Barrels and Bandit barrels are threaded in 10mm-1.0 threads
the Airbug is not and it is the CP barrel
there was a seller on Ebay that 3D printed adapters i bought many and they were cheap and made the barrel look normal
there were Bandit Barrels in Canada but the last i looked they were gone
there .25 barrels in Canada and they were also gone i have 2 sets of those
Stormrider Barrels can be used but they are also gone
do you see a trend no one cares to stock parts so us tinkerers can tinker
i have been in the Chaser rabbit hole since 2019 so i have many of those now gone parts
BUT I MUST SAY THE IMPOSTERS OF THE SNOWPEAK LINE OF PRODUCTS ARE MISSING THE BOAT AS THEY HAVE NO DAMN PARTS
and when Canada does a better job than anyone in the states and i do mean Pryamyd Air the states side company should be embarrassed
my last Chaser count was 7
but
Chaser Barrels and Bandit barrels are threaded in 10mm-1.0 threads
the Airbug is not and it is the CP barrel
there was a seller on Ebay that 3D printed adapters i bought many and they were cheap and made the barrel look normal
there were Bandit Barrels in Canada but the last i looked they were gone
there .25 barrels in Canada and they were also gone i have 2 sets of those
Stormrider Barrels can be used but they are also gone
do you see a trend no one cares to stock parts so us tinkerers can tinker
i have been in the Chaser rabbit hole since 2019 so i have many of those now gone parts
BUT I MUST SAY THE IMPOSTERS OF THE SNOWPEAK LINE OF PRODUCTS ARE MISSING THE BOAT AS THEY HAVE NO DAMN PARTS
and when Canada does a better job than anyone in the states and i do mean Pryamyd Air the states side company should be embarrassed
my last Chaser count was 7
Upvote 0
