100 yards group fx impact .25 34 grain jsb pellets

[mubhaur]

I just got time to do some shooting with my family. 

I don't post 50 yards group as these were not challenging. 

Distance was 100 yards, .25 fx impact, hammer forged barrel, 34 grain jsb pellets, around 945 fps.

The group is of 15 shots and wind was around 12km.

 

[tibor]

terrific..thanks for sharing!

 

[Saltlake58]

I have a Gen 1 Impact. You give me hope to be able to shoot that well in time. Nice groups, nice to have family shooting together!

 

[mubhaur]

Thank you friends. 

Impact Gen 1 is very capable gun. In good conditions you can achieve same. To make it a bit easy you can get X barrel system.

 

[Saltlake58]

Right now, my Impact is in pieces. Upgrade to Power Plenum, X Barrel Superior liner, new transfer port, new probe. Should complete assembly shortly. Then, to the range to sight in and shoot!

 

[mubhaur]

Right now, my Impact is in pieces. Upgrade to Power Plenum, X Barrel Superior liner, new transfer port, new probe. Should complete assembly shortly. Then, to the range to sight in and shoot!

I hope you will get good groups. To me impact is hold sensitive. So I have to be very careful for good groups.

 

[jps2486]

Can you provide some info on this barrel, please? Maker, length, twist rate.

 

[Khornet]

Very impressive group. Especially with that wind. Pics are like the scene at my house this weekend. Savor them!

 

[Cbourbeau32]

Nice group! 

 

[mubhaur]

Can you provide some info on this barrel, please? Maker, length, twist rate.

Its BSA old stock Cold Hammer Forged barrel. 600mm length. I dont remember the twist rate

 

[primaz]

Can you provide some info on this barrel, please? Maker, length, twist rate.

Its BSA old stock Cold Hammer Forged barrel. 600mm length. I dont remember the twist rate

Those BSA's barrels are famous for their quality, it shows you old school is still can be as good as the newest tech; that is like a restomod air rifle, cool...

 

[mubhaur]

Can you provide some info on this barrel, please? Maker, length, twist rate.

Its BSA old stock Cold Hammer Forged barrel. 600mm length. I dont remember the twist rate

Those BSA's barrels are famous for their quality, it shows you old school is still can be as good as the newest tech; that is like a restomod air rifle, cool...

My RAW HM1000X .22 and .25 both guns have BSA old stock barrels. Both are extremely accurate. 

 

[mubhaur]

This is also a BSA .22 barrel group with 18 grain jsb at 950 fps at around 116 yards. I think its 8 shots group.

 

[monstr2]

With my Impact Mk 2 & cylinder pressure at 170 bar i am not able to hit a pigeon at 100 yards although it hits bullseye at 70 yards every single time.

Cylinder pressure is currently at 170 bar becoz the regulator has a leak.

 

[jps2486]

With my Impact Mk 2 & cylinder pressure at 170 bar i am not able to hit a pigeon at 100 yards although it hits bullseye at 70 yards every single time.

You might yry backing down the reg pressure. 140 should be adequate, but you could tweak it up from there.