Fx impact m3 single shot loader
- Thread starter Stewy1412
- Start date
Here is my custom single shot with changeable inserts I made for the MK2 impact. I 3d print all sorts of goodies.
Upvote 0
Yep, CARM here too. Looks and functions fantastic!
Different colors available too if that flips yer switch.
mike
Different colors available too if that flips yer switch.
mike
Upvote 0
I tried ordering the carm but aparently my bank doesnt support the currency or something weird and wont go through so im trying to decide between the kraford and lypt or huma?
Upvote 0
This is a FX SSL I got it with my Impact when the MK2PP first time arrived early 2020. Pictured with a 46gr boat tail in and pretty much you can load 13.5mm comfortably.
Upvote 0
Kraford & Lypt for benchrest shooting - pellet holder is a separate piece and allows for precise placement of pellet.
Maple Custom Products - pellet holder swings out from breech, easy to load, better fit and finish than Carm.
Maple Custom Products - pellet holder swings out from breech, easy to load, better fit and finish than Carm.
Upvote 0
I use Carm SSL for Maverick and my Two, i like the flip out VS old school have to finagle shot onto V shaped tray.
It is a bit confusing that om Maverick it flip down VS on the Two where it flip up, but no biggie i hardly shoot Maverick now so have transitioned to upwards flip.
It is a bit confusing that om Maverick it flip down VS on the Two where it flip up, but no biggie i hardly shoot Maverick now so have transitioned to upwards flip.
Upvote 0
Hi Guyz
So I have another view at a Single loader
Here is a FX Impact 35 rounds single shot loader.
I call it a ManuLoader - It works like a single loader - Only you prefill the magazine with your carefully selected competition pellets.
Close the cover - There is no spring -
instead the rotors stop positions are controlled by a retention spring loaded ball, that stops the rotor at the position where there is a pellet.
So no mechanical force of any kind on the pellet or slug - in fact if you fit an empty manuloader and pull back and forward you bolt / loading handle you can not feel that a magazine is installed.
Maximum accuracy - Single shot 35 and then refill - We call it ManuLoader in Denmark
So I have another view at a Single loader
Here is a FX Impact 35 rounds single shot loader.
I call it a ManuLoader - It works like a single loader - Only you prefill the magazine with your carefully selected competition pellets.
Close the cover - There is no spring -
instead the rotors stop positions are controlled by a retention spring loaded ball, that stops the rotor at the position where there is a pellet.
So no mechanical force of any kind on the pellet or slug - in fact if you fit an empty manuloader and pull back and forward you bolt / loading handle you can not feel that a magazine is installed.
Maximum accuracy - Single shot 35 and then refill - We call it ManuLoader in Denmark
Last edited:
Upvote 0
Can be used in 5.5mm 22cal with 35 40 grains longer slugs 11 13 mm?Hi Guyz
So I have another view at a Single loader
Here is a FX Impact 35 rounds single shot loader.
I call it a ManuLoader - It works like a single loader - Only you prefill the magazine with your carefully selected competition pellets.
Close the cover - There is no spring -
instead the rotors stop positions are controlled by a retention spring loaded ball, that stops the rotor at the position where there is a pellet.
So no mechanical force of any kind on the pellet or slug - in fact if you fit an empty manuloader and pull back and forward you bolt / loading handle you can not feel that a magazine is installed.
Maximum accuracy - Single shot 35 and then refill - We call it ManuLoader in Denmark
View attachment 527398View attachment 527399
Upvote 0
Hi EvelHere - Scary
I cant remember exactly how deep it is possible - I think 11.something - I havent really looked into maxing the length out, but i will take a look at it.
Anyway I cant ship the ManuLoaders abroad, since the low in locally is tough on exporting and also manufacturing firearms parts without a permission that is close to impossible to get.
Where are you based?
I cant remember exactly how deep it is possible - I think 11.something - I havent really looked into maxing the length out, but i will take a look at it.
Anyway I cant ship the ManuLoaders abroad, since the low in locally is tough on exporting and also manufacturing firearms parts without a permission that is close to impossible to get.
Where are you based?
Upvote 0
Manuloader looks pretty sweet! I love that idea.
Not nearly as slick but this is the single shot loader I've been working on. I've been meaning to machine an aluminum version but the 3d printed version has been working well enough that I keep putting it off. Its for 25 cal but could be easily modified for any caliber. I'll attach the step files in case anyway whats to print their own. Maximum length slug is .51" (13mm) Magnets aren't probably necessary but nice to have. They are 6mm diameter and 3mm tall
View attachment Archive.zip
Not nearly as slick but this is the single shot loader I've been working on. I've been meaning to machine an aluminum version but the 3d printed version has been working well enough that I keep putting it off. Its for 25 cal but could be easily modified for any caliber. I'll attach the step files in case anyway whats to print their own. Maximum length slug is .51" (13mm) Magnets aren't probably necessary but nice to have. They are 6mm diameter and 3mm tall
View attachment Archive.zip
Last edited:
Upvote 0
I put an o-ring groove in the one i printed. It keeps the pellet centered and keeps it from falling out. same size as the breach ring.
Upvote 0