HW/Weihrauch Weihrauch HW30/R7 Parts Search?

[jlharden]

Hello all,

I've been troubleshooting my old R7 and in search of new barrel shims and pivot bolt assembly. Both are fairly worn. I've visited the usual sources with little success. Anyone know where I might find some Weihrauch small parts?

Thanks!

 

[TnCnDn]

Hello all,

I've been troubleshooting my old R7 and in search of new barrel shims and pivot bolt assembly. Both are fairly worn. I've visited the usual sources with little success. Anyone know where I might find some Weihrauch small parts?

Thanks!

Pyramid Airguns, that's where I sourced some.

 

[jlharden]

Pyramid Airguns, that's where I sourced some.

I did search there. May just give them a call. Thanks!

 

[DonR]

T W Chambers in the UK shows bolt assembly B1349 and washer W077 in stock. Many folks here have had good results with Chambers.
I had thought the washers were hardened and wouldn't wear...?
https://twchambers.co.uk/airgun-spares/weihrauch/hw30/

Don R.

 

[marflow 777]

https://www.airgunspares.com/gunspares/airgun-spares/weihrauch/hw30.html
the prices are with vat on them we don't pay them their service is great but remember those prices are in Pounds

 

[jlharden]

T W Chambers in the UK shows bolt assembly B1349 and washer W077 in stock. Many folks here have had good results with Chambers.
I had thought the washers were hardened and wouldn't wear...?
https://twchambers.co.uk/airgun-spares/weihrauch/hw30/

Don R.

Thank you for that. I will head that way.

 

[jlharden]

https://www.airgunspares.com/gunspares/airgun-spares/weihrauch/hw30.html
the prices are with vat on them we don't pay them their service is great but remember those prices are in Pounds

Shows out of stock on the pivot bolt. Was hoping to nab a few small parts without going to multiple vendors. It's not that urgent so I suppose I'll just wait it out! International orders may get interesting.

 

[bustachip]

AOA has some parts.

https://www.airgunsofarizona.com/index.php?p=catalog&mode=manufacturer&parent=0&mid=3&search_in=all_but_description&search_str=&pg=1

 

[jlharden]

AOA has some parts.

https://www.airgunsofarizona.com/index.php?p=catalog&mode=manufacturer&parent=0&mid=3&search_in=all_but_description&search_str=&pg=1

Shim washers, no pivot bolt. Multiple shipments from various vendors may be the option unless TW Chambers pans out. Thanks!

 

[TnCnDn]

I did search there. May just give them a call. Thanks!

It was a bit of challenge, and they did eventually come through with the washers and the through bolt assembly included after some time. I had given up and low and behold it showed up sometime later.

 

[jlharden]

Thank you. I was taught that patience is a virtue!

 

[Mycapt65]

Shim washers, no pivot bolt. Multiple shipments from various vendors may be the option unless TW Chambers pans out. Thanks!

Did you call them or just look at their website? They have lots of parts not listed on their website. Call Shane there at ext 150.

 

[Mycapt65]

What's wrong with the R7 that you want to replace the pivot parts?

 

[marflow 777]

the world and parts for our hobby could be in for a long rough ride

 

[jlharden]

What's wrong with the R7 that you want to replace the pivot parts?

Thanks, I will give them a call. Shim washers are flattened and worn thin. The nut portion of the pivot bolt is slightly damaged. Just going to replace it all to be safe. Trying to improve the lock up and the worn parts seem to be contributing to the issue as well as the new breech seal which might be a bit too thick.

 

[Mycapt65]

Hw30 / R7 lock up issues and fixes

Hw30 / R7 lock up issues and fixes I've read about people having vertical stringing and lock up issues with Hw30s. Sometime ago I wrote up a post explaining what I found when I was trying to fix a sinking POI when shooting for extended sessions. What fixed that rifle was thinning the breech...

www.airgunnation.com

Message me for my phone number if you need more help.

 

[MDriskill]

JG Airguns (John Groenewold near Chicago) shows the pivot shims under HW 50 parts. They are the same part for any HW with the 30mm receiver tube diameter.

HW50 : JG Airguns, LLC

JG Airguns : HW50 - Accessories, Cleaning Supplies Airguns Ammo, Collectable Ammo, Shootable Books, Catalogs, Manuals, etc. CO2 Cylinders Collectables Mounts, Scopes, Sights, etc. Parts Tools Gift Certificates Buglespanner see Will JG Airguns Accessories, Cleaning Supplies Airguns Ammo...

www.jgairguns.biz

 

[A.G.R]

JG Airguns (John Groenewold near Chicago) shows the pivot shims under HW 50 parts. They are the same part for any HW with the 30mm receiver tube diameter.

HW50 : JG Airguns, LLC

JG Airguns : HW50 - Accessories, Cleaning Supplies Airguns Ammo, Collectable Ammo, Shootable Books, Catalogs, Manuals, etc. CO2 Cylinders Collectables Mounts, Scopes, Sights, etc. Parts Tools Gift Certificates Buglespanner see Will JG Airguns Accessories, Cleaning Supplies Airguns Ammo...

www.jgairguns.biz

The spacers for every gun besides the HW 80/35 are the same. All 25,26 mm tubes use a smaller shim. The 30 mm tubes use a bigger shim.

That being said I’ve NEVER wore a shim out as they are spring steel. I’ve seen many who buggered up the innards trying to push the bolt through and fat screwdriver ing the head with a tapered slandered driver.

 

[TnCnDn]

The spacers for every gun besides the HW 80/35 are the same. All 25,26 mm tubes use a smaller shim. The 30 mm tubes use a bigger shim.

Diameter wise? Just want to be clear. Now as far as thickness, let's say feeler gauge wise.

 

[MDriskill]

To be clear, my post above refers NOT to the piston seal size, but to the receiver tube's OUTSIDE diameter, which is the operable number for breech shims. The HW 30 and 50 use a 30mm OD tube; the big HW 35/80 with screw-off rear section a 35mm one.

The smaller shims are 18mm in diameter, the bigger ones 22mm. Both sizes have an opening a hair under 8mm and are 0.004" (0.1mm) thick.

As a point of historical interest - most pre-war barrel-cockers don't have any breech shims, and Weihrauch didn't start using them until the mid 1970's. Their older guns have none, or sometimes only on one side; the very thin material shows they are a bit of an afterthought!

Diana barrel-cockers, in contrast, have used a much better (IMHO) design since the 1950's - heavy rimmed washers fitted into milled recesses in the breech block, with an additional belleville washer on one side to control tension. I have never seen a lateral barrel alignment issue on a Diana.