Sheridan Sheridan Model C Photo Request

  • Like
Reactions: OldVet
This photo taken a few month's back. Added 6 more and counting since then.
The model A got the juices flowing again.

IMG_2114 - Copy.JPG
 

Attachments

  • IMG_0180.JPG
    IMG_0180.JPG
    4.8 MB · Views: 2
Those Model A's have a great balance and feel. I like the C's but the A/Bs feel better in the hand.
I acquired the MA only a few month's ago and was thrilled to finally test one on the range. Primarily because the MC is extremely accurate and wanted to compare the two. You are exactly right when it comes to balance and feel , although one advantage the MC has over the A is the trigger. The MA's ribbed trigger grips and doesn't allow for shooter error whereas the MC's trigger is slick and is as good as it gets for a American made vintage ag right out of the box with zero modifications.
 
Last edited:
I have been taking photos of the Sheridans I have resealed for customers, would they be of interest, IIR I do have most the photo angles you would like?
I have been taking photos of the Sheridans I have resealed for customers, would they be of interest, IIR I do have most the photo angles you would like?
OK I found one, I may add with the last 2 I resealed, they pumped, but did not hold air overnight. Both responded to giving the rear valve plug a 1/4 turn tighter, as both were easy to back off, and they both held air 24 hours after. I did do a full teardown and cleanup, as the internals were getting crusty. Also both had barrel separation, one had already been epoxied but still had voids, I used a rubber reinforced CA glue on both to keep them together, with owners consent. It can be removed with acetone if the need arises.

IMG_20240209_210517.jpg