What did you do airgun related today.
- Thread starter Florida_Man
- Start date
for a friend in Tennessee .
Depends on hammer tension and vavle tension, you can adjust your air rifle so that each shot is only using a portion of the air in the plenum and not dumping all the plenum volume at once.
Upvote 0
attached a yokozuna and a Thermnight to the Sidewinder compact , zeroed the thermal reticle..
Upvote 0
Enjoyed this barrel aged beauty while I browsed AGN and lamented the Sidewinder that I missed in the classified section. Oh yea, earlier this morning I finished the fixed QD fill port for my Uragan2 so that I don’t have to rely on probes for either of my AGT guns anymore.
Upvote 0
Took the hammer out of the U2 to measure before sending off to get a custom made hammer and other goodies.
Upvote 0
decided to machine a new slug spider for my fx magazine almost done as the spiders are designed for pellets
Upvote 0
I dropped the reg pressure on my DreamTac from 100 bar to about 90 bar. After 3 years of screwing around with various tunes, the one it came with was probably the best and I'm going back to it this year. Still gotta drag out the chrony and play with the hammer preload, but I took the first step. When I put it up for the evening I thought to myself, "this gun is totally not tuned anymore... hope I remember!"
Upvote 0
Sourcing the parts to convert my .25 AV Avenger to .22. I cast most of my pellets and this is the only .25 gun I have. I don't hunt so the .25 is above my needs. I can sell the NOE 251 27 RF aluminum 4 cav mold and sizer and invest in another .22 mold.
The NOE 217 24 Magnum mold I have is a 2 cav. I would prefer a 4 cav to make casting faster. I'm also considering another slug mold.
The NOE 217 24 Magnum mold I have is a 2 cav. I would prefer a 4 cav to make casting faster. I'm also considering another slug mold.
Upvote 0
Got the RMA# for a Vector scope that just arrived a couple days ago. Turd balls sent me a used scope in an open box. F them from now till the end of time. 
Upvote 0
Where did you order it from?Got the RMA# for a Vector scope that just arrived a couple days ago. Turd balls sent me a used scope in an open box. F them from now till the end of time.
Upvote 0
Tried a tin of the Barra 10.3 the mules in a 177 marauder and shot some of the most consistent flyer free groups I ever shot out of that Lothar barrel.
Upvote 0
Cast, sorted and tumbled a couple hundred 217 24 rf magnum pellets. This is a 2 cav mold and its a slower row to hoe. I'll keep going until I have a couple k inventory then move to another weight, type and/or caliber. As long as I cast more per day than I shoot I'm good to go. My casting shack has creature comforts such as heat/ac, streaming tv and music.
Upvote 0
