Benjamin Benjamin pRod over 12 years of use review

Thought I would share my experiences with my pRod with over 12 years of use.
You need a bigger mag???

IMG_20250107_155133.jpg
 

Attachments

  • IMG_20250107_155050.jpg
    IMG_20250107_155050.jpg
    1.9 MB · Views: 1
Thought I would share my experiences with my pRod with over 12 years of use.
This is why i usually recommend this gun for a first PCP . Marauders just keep going and if they break , much easier to replace parts . The only time i hear of failures are when the owner tries to make the gun something it was never intended to be , but does not have the talent to do so .
 
  • Like
Reactions: Wingman115
Thanks...!

I assume it needs to be molded in some way to work...?
Only thing I did is use a .25 magazine housing with a .22 insert.. the channel on the back of the .25 magazine is the same size as the portion of the barrel that sticks out of the marauder block... You can use the original.25 insert but it leaves a lot of room for the smaller pellet to move around.. it cycles though.. I don't have a .22 mag to know if the channel on that is the same size.. I tried my panthera mag which would be the perfect size height wise to actually use but the channel on that is too small... Maybe a .25 would work.. might try to find one
 
  • Like
Reactions: Todywayne
Only thing I did is use a .25 magazine housing with a .22 insert.. the channel on the back of the .25 magazine is the same size as the portion of the barrel that sticks out of the marauder block... You can use the original.25 insert but it leaves a lot of room for the smaller pellet to move around.. it cycles though.. I don't have a .22 mag to know if the channel on that is the same size.. I tried my panthera mag which would be the perfect size height wise to actually use but the channel on that is too small... Maybe a .25 would work.. might try to find one
Cool... Thanks for the info... Much appreciated...!