subscriber's latest activity

Thanks, I already know how to do this. I do it a bit differently though. I put a slug into the magazine and push it into the barrel...

The mag chamber diameter also matters. You don't want to struggle loading the mag, nor have projectiles drop out because the barrel like...

Drilling it out to 1/4" provides only 0.016" clearance for the pellet if all the pieces were perfectly centered, which they never are...

Had this one made for doing bench work and a super anal permission that doesn't want to hear anything louder than a snap.

Appreciate that.

I was sent these images of a Leshiy Classic with a 350 mm barrel in .25, that might help:

I notice from your other videos that you don't seem to have dB readings over 83, regardless of moderator, or meter placement. This...

It sounds like a bit of research is in order, to see if other GK1 owners have had the same problem.

Is it possible that rapid fire can shoot some slugs at less than full pressure (or valve duration), so getting some slugs stuck in the...

A small bore tube can stand surprisingly high pressure, even with a thin wall. So, a stuck slug in a Huben barrel is not going cause a...

I went ahead and ordered the new barrel from wolfiek. No discount though.

I'm using a subscriber bore test .22 ldc on my .25 gk1 shorty amazing how well it works and pretty dang light.

Is the plural of Notos Noti? In any case I have 2 Notos. But it seems to have rained aftermarket Notos moderators on me. There are...

There are moderator inserts available on eBay and made by some users on the forums. You can easily remove the stock moderator insert and...

Perhaps Gregor knows where you can get a Huben barrel. Or can advise where to ask. His email address is listed on his YT channel.