subscriber's latest activity

Scrubbed the bore with a bronze phosphor brush after treating it with CLR for 30 minutes (something I read in an article by a...

Shroud vent holes may reduce report as measured near the muzzle, while increasing it to the side. I prefer less noise at my ear...

If the OD of the liner is hidden then we can't look at it :). How about bore scoping the last foot length of the bore instead? If it...

I'm in the wrong profession, what do you do to afford all these at once? 😂

carlos_hathcock, I may be imagining it, but over the 4 or 5" depth of barrel bore you captured in that video, there seems to be no...

That looks better, Jim. Flaky. More convincingly like lead deposits.

Ok, so I ended up throwing the .30 IA 1350 mod on the .25 SLS compact today. I tried it first with the way it came (baffles wise) than...

PB shooters have been using pure copper strands wrapped around a brush for fast removal of lead for a century or more. It is the...

The Panthera has an active shroud, albeit a short one. The first baffle is either a reflex air stripper feeding the rear of the shroud...

You can shoot .177 pellets though a .30 mod and it will work much better than you expect, for two reasons: Airgun power is roughly...

Unless it was hydrogen-oxygen mixture, the only product of combustion is water vapor. :D

In a nutshell; look for lead build-up at the choke and crown. If there is some, does it correlate with groups opening up?

Per the video, it is for "the cool factor"; a "tactical look"; "just for looks". AKA, bling, not function.

It used to be, with the yoko things are different apparently. I will mic my yoko when it arrives. My donny fx and my donny ronin are...

Probably the shroud on my ZM2002. It runs about 10” past the end of the actual barrel muzzle.