Recent content by turbospud

do you have it on an fac certificate or was it bought as a sub 12

air leaks,stuffed regulators all part of the service from there:ROFLMAO:

so was the port the wrong way up

dr, thread for more info. https://www.airgunnation.com/threads/rti-mora-600mm-25-cal.1325024/

that should be directed at highland outdoors,they dont have a clue. but on the other hand would you want them in there doing stuff:eek: i have already said to rok he needs a better importer,they are the ones causing the problems. i think they are now due us around 1500 slugs because of their...

i see rok is on the case,you cant beat the customer service from rti. best to email rok directly with any questions, as the importer doesnt know the front from the back of a gun,just box shifters

yes through the dwell valve,its the next part in. its held by the grub screw under the magazine. if you look in the dwell valve hole with parts you have removed you will see what direction its set

another thing that could cause inconsistancy is the fx chrono,like everything fx you might get one that works. i would also get some pellets to try,better seal in the barrel. few slugs offer this which can be a cause of erractic speeds

as highland outdoors are involved have they set the dwell valve to fac,mine wasnt. it was trying to breathe through the small hole. i was up at 170 bar as well

https://www.rtiarms.eu/docs/mora/manual

get a chrono quick before you get 5 years inside. a 30g with 130bar will be well into firearm territory. put the reg back to 50 bar to start with and use an 18g pellet and see what readings you get

any tuning on a sub 12 would put it way over the limit,what fps and pellet weight is it doing now

my one is now producing full power,rti most likely send them to the uk choked off to keep to the uk limits. the importer had not reversed the valve or the hammer restrictions to suit the license i have. i think your video showed you had to alter the valve too. the 34g hn are proving to be very...

will do,should be easier to tune now;) Rok does read up on here so we will be kept right(y)

maybe so the same valve system can be used for different power levels in different markets. seems well made parts compared to other guns i have.