Recent content by Xcaliber

That's what I'd do. 700mm is a must if you intend to shoot a lot of 150~200 yard, you'll need to sling slugs at those range. anywhere between 24gr to 36gr should be fine.

almost February, still no sight of this Max 1? :ROFLMAO: :ROFLMAO:

I'm calling you out for spreading fake news and you've made a bogus wild claim of taking 60 cold shots to recover the speed. :ROFLMAO:

mine and few that I have seen took less than 10 shots to get back up to full speed after parking for weeks or months, i'm going to call out your exaggeration if not downright fabricated fake news on needing 60 shots to level out. I dare you to take a video recording and showing how your M4 is...

The vast majority of M4 have the slow shot syndrome after the gun parked overnight, if this is something you can live with then by all mean. This problem doesn't bother me since i'm never in any situation where I couldn't fire a few blank shot for 'warm up', but there are those who simply...

Tell the wife it's an investment to protect the existing investment (livestock and all)! ;)

He said no semi, hence why Huben is off the table.

Also take into consideration the action noise level when using bullpups like Maverick/Wildcat well above 60fpe in .22, the hammer and spring action is right next to your ear and cheek when it's smashing the valve at full force, it could feel and sound quite violent and nerve wrecking. 😅 60...

Thanks for the tips, will do. How often do you plan on yanking out the valve rod for cleaning/polishing? 1000~2000rd to keep it as clean and as consistent as possible?

The Maverick/Wildcat or M4 compact can crank out 70+ fpe easily even with 500mm barrel in .22, as long as you have heavier hammer to go with higher reg pressure in 140 to 170 bar, but it's easier to get there with .25 or .30 if you need high FPE.

Good luck, hope your Epoch is problem free, saw someone bought a new Epoch and jammed up, had to send it back but unfortunately he didn't have any luck with the replacement either, so he got rid of it.

does the valve rod came straight out after removing the C1? or do you have to take apart the plenum?

if your bottle pressure is at 300 bar, running the reg at 80 bar "generally" is going to put significant more stress on the reg than if you were to run the reg at 150, or have the bottle fill at 250 bar, since it has to maintain/regulate and keep down 220 bar of pressure (from 300 down to 80)...

Glad to hear, i've accumulated over 20K of pellets and slugs, just wasn't sure how many of them would oxidized..... 😅

Those of you who stockpile pellets and slugs, how many thousand rounds do you usually keep around in storage? any concerns and worries of these lead getting oxidation after a few months or a year or so?