R

RM.510bigbore

Member 41 From Pennsylvania, United States
View Feedback Add Feedback
Messages
1,468
Solutions
1
Featured content
0
Reaction score
1,085
Level
1
Joined
Last seen
Follow
Start conversation

Profile posts Latest activity Postings Featured content About

  • R
    AHH Air Anxiety at hunting season as always..On like 10-12 pistons -rebuilds on yong heng.. I bought a GX CS4 compressor..It was within budget...I need to fill a SCOTT 5500 psi tank for my .510 Texan..Sometimes..I just want enough air to shoot my Custom Condors..Time will tell how good this chinese compressor is..To keep shooting PCP's i have to play the cheap compressor game..Wish me luck friends Good Day
    R
    IMG_20241029_101912.jpgI found this at my posted signs along the road at our property.. The locals aren't happy with me..So in retaliation they poach and discard carcass to find..It ashame they waste half the meat.. There definitely not hungry.. This is routine in Fayette Nam ..I'm going to be staying at the property things are slowly changing..
    Report Reply
    • Sad
    • Like
    Reactions: Ezana4CE, Mr.H, Peashooter and 1 other person
    View previous comments…
    R
    This has been going on for the 20 year s we owned the property.. Amazing the 🦌 Population is reproduceing at a faster than the poachers and trespassers..Here it's called a patch town .A old coal mine town in the middle of nowhere.Our property 98 acres surrounds the patch town.. The locals think it's there right to do as they want as they always have.. Using different intedimation tactics.. A local shot a 160 inch buck on our place.. That's the problem huge deer..Greed like $10,000 dollar bills running around... What I'm doing on the property has helped.More deer bigger deer .. Now I have to commit some time to deal with a couple trouble makers and all is well..I got at least 25 acres brush hogged this week 🙂...
    R
    The way that Buck is butchered is typical of most sports man in my area..50 percent of meat wasted ..No one actually eats deer n my area... One sports man I know of shoots as many deer as tags available and only will feed to dogs..It's $200.00 for deer processing... Wasting Natural Resources Free ..The person who killed that Buck makes 80-100 k a year... Well off in my area.. Purely for Recreational Activities..
    Ezana4CE
    That's a lot. I hope I never see anything like that. It's bothersome to see that happen to you.
    R
    Finally got my Kubota Tractor restored and to our family property that has been in neglect for 20 years..Sooo happy got a lot of brush hogging done..New 200 yard handicap ready airgun range..Will be able to drive to targets..Hopefully get camper setup today!!!!New replacement 12 twist high power 22 condor coming this week to replace the one stold from me.. Will be hunting soon!!! THANKS FOR THE SUPPORT FROM THE MEMBERS HERE
    R
    THEFT....My Custom 22 Condor was stold from under my carport.. Im on crutchs today and wanted to go squirell hunting..I couldnt do the steps with the airgun so i left under the carport..I live off the road rural location..I leave quad weed wacker various tools i use there frequentely.. My neighbor s on meth staying at his dads house.. So i guess he had the balls to walk up and steal it...Anyways he is brazen.....This condor has a custom doug noble valve and a 12 twist .222 barrell..I live in Perryopolis PA If this comes up for sale let me know.. It the one in mu profile post with squirrel
    R
    IMG_20241007_114208.jpg
    Finally all coming together with custom 22 Condor. .225 Powder Coat Lee 55 grain Slug 930 fps.. First squirrel 🐿️ in ten years.. Thanks to my friends on airgun nation make possible..
    R
    Finally luck with the CHazsel 12 twist .222 barrel with 55 grain and 47 grain .225 slugs..Slugs shoot at 930 fps for 55 and 975 for the 47 grain..Any higher pressure accuracy everywhere..Slugs not stable supersonic..Im learning
    Report Reply
    Peashooter
    I have shot smaller stuff for the small caliber i shoot super sonic, and it arriving in correct orientation, also pretty decent accuracy, but i did chase POI around
    for a long time i did shoot 13 grain at 1050 fps ( not SS ) but in the end found out 960 or so was much better with no chasing POI

    Lost count on the many times i have tried to shoot heavy stuff fast, then given up and put something lighter in, and forgotten to lower pressure.
    The crack of super sonic wake you up.
    R
    I almost gave up on my Chazsel .222 12 twist barrels for my condor builds..At first 55 grain and 45 grain arenal hitting sideways..I had the power turned up??Anyways bought some 36 .223 NSA slugs...They would stablize and only shoot on the low end ,,everything turned town 2500 psi..So for the heck of it I tried the 47 and 55 grain slugs..With everything turned down they are stablizeing..This valve has the power,,but anything super sonic crazy inaccuate and unstable.. Im learning..Getting a 9 twist .223 barrel soon!!!
    R
    Ahh all done rebuilding yong heng 8 th time...Couldnt sleep last night changed piston in a half hour..On the road again another 8-10 refils on my scba tanks....
    Report Reply
    R
    well the 8th piston didnt last..Brand new the piston rod broke almost instantly...Bad from manufacture..Took apart changed connecting rod..Working again..I need to upgrade air source soon!!!!!
    R
    Trying to muster up the courage to rebuild the old yong heng for the 8 th time in 3 years..I keep the tools to rebuild right beside compressor..No need to put away..lol .It usually needs a new piston after the 8-12 fill on scba tanks..IT costs30.00 for new piston gasket..30 min time to rebuild..So i guess its worth it...
    Report Reply
    • Wow
    Reactions: Firewalker
    Firewalker
    There is definitely something wrong with your YH! I've got well over 100 hours on mine and I only blew out a 4500psi safety dusk (totally my fault, I used a used tampon that shredded, blocked the outlet).
    R
    Super happy to try some NSA 36 grain .223 slugs in my 12 twist chazsel barrels for my custom condor builds..I just shot one to see if i needed to size..AND super sonic...ill chronograph tomm..ill bet 1300 fps...ill try a subsonic amd super sonic load. fingers crossed i like something to go pa squirrel hunting with
    R
    IMG_20240922_175744.jpg
    Report Reply
    • Like
    Reactions: Stubbers
    View previous comments…
    R
    Yes my Texan .510 is finally consistently accurate...Alteast 300-500 powder coated slugs shot through the barrel since last cleaning...My 3 hours of old school hand lead lapping my barrel payed off. I stated at 120 grit..My gun had to be cleaned every 3 rounds before for any kind of accuracy...The slugs i shot were strait otta NOE 4 cavity mold not sorted in any way..Powder Coated..And to boot very hard wheel weight lead from the 1970's and water quenched too..They are hard..But when sized properly to .510..They shoot just fine..I have 100% pure lead powder coated slugs and both shoot the same..I have about 150 lbs of the free wheel weight lead made into 450 and 630 grain hard lead cast slugs..It s really a waste shooting them at low speeds..Im sure that hard lead water quenched powder coated slugs would be fine up to 2500 fps..But they were just buckets of old nasty greasy wheel weights..Now beautiful accurate free .510 slugs..Powder coating almost free. 1 lb does alot of slugs...
    Ezana4CE
    I believe it. I've shot some Hornady Cowboy bullets that are obviously harder that airgun slugs and they shoot pretty well. Is it tough to clean all that gunk from the wheel weight lead? I'm wondering if you have to melt the lead multiple times to thoroughly clean it.
    R
    Its pretty easy to clean the wheel weight lead..Just a cast iron dutch oven on a outdoor propane cook burners..Once the lead melts all the steel floats to the top..The grease acts as a flux and burns off..All impuritys come to the top and skim off..I then pour into old muffin tins to make my clean lead for casting..Its the same process for pure lead, except its usually a roll of roofing lead..I cut it in pieces, put in dutch oven , melt, flux,skim off impuritys, pure in muffins tins, ingonts ready to cast. Pure roofing lead cost me $1.00 a pound at the local junk yard..Im sure they buy it for alot less..
    R
    Airguns are a learning curve..lol I have been getting terrible accuracy with my Chazsel .222 12 twist barrel.. Long story short i got another one... And half 45 grain .222 hitting sideways at 10 yards..Anything heavier 55 grain every slug side ways... I guess you need 7-9 twist..
    R
    I miss having a lathe at my place..Long story short I think im going to buy another used metal lathe..My friend loves my Jet13x40 and he does too much beautiful custom work it. Looking on marketplace I saw some nice lathes for sale. The 13x40 jet is great for light work but not heavy turning. So ill get at least a 13x40 or maybe bigger...I,ve only run chinese lathe's..Maybe find a nice old american lathe. I miss doing barrels on the late nights when sleep isn't a option.. I just got a Teslong digital borescope and wow is it good. Much better than my old Hawkeye borescope..Getting my old interest going again.. Thanks for your support
    R
    Bought here on Airgun Nation classified used Airforce Condor.. It has a Chaszel 22 Lr 12 twist barrel liner now 27.5 inch after shortening 22lr chamber to just use thoat.. sleeved 10 mm to 12 mm carbon fiber sleeve from Amazon $30.00 Threaded barrel 3/8-24....Amazon automotive brake line adapter 3/8-24 to 1/2-20 for $5.68.. Drilled.out to .250 diameter on lathe.. Moderator from classified here.when that was a thing..$10.00. Amazon $30.00 300bar 8mm valve. EBay 90 gram.hammer and heavy power spring...I.can't wait to size and shoot some heavy 50 grain slugs... This Condor was built with parts.knowledge and the financial support of great friends and family... Staying busy with airgun s this week...My loved loyal 14 year old Mountain Fiest passed away Saturday.She caught moles voles and even one last ground hog this summer with a Pitt bull friend.. Thanks for Airgun nation.and the knowledge and support friends...17218806330846605216093981779307.jpg
    R
    IMG_20240723_223708.jpgIMG_20240723_223527.jpg
    I got my Arsenal molds .223 powder coat bevel base 5 cavity mold in 🙂🙂🙂 They are around 50 grains..I cast and powder coated 8 pounds today... They came out good 👍 today Shake and bake ...13 min at400 degrees...and stait out of oven into water quench..They all separate and no marks... It's takes a minute casting and powder coating to get it perfect 😊 I cast and powder coated around 1100 slugs Today for $8.00....Pure lead cost me $1.00 a pound
    Report Reply
    • Like
    Reactions: ThomasT, WoodWelder and Ta-Ta Toothie
    Ezana4CE
    @RM.510bigbore Wait. You're saying that you take them straight from the oven with powder coat and dump them into water? What's the purpose of doing that?
    R
    The reason being I powder coated 1100 slugs at one time. One heaping pile on a oven cookie tray..Dumping them hot 400 degrees instantly into water separates them perfectly no marks..Otherwise you would have to individual handle each slug a set up right in silicon.ice.cube trays.. So 1100 slugs cast time 4-5 hours. Total.time powder coating including 13 min oven maybe 30 min total..It took 8 lbs of pure lead at a $1.00 a pound to make 1100 47-50grain.slugs..Probably about 2 table spoons of powder coating... Arsenal 5 cavity mold $100.00 shipped... I rebelling against $20.00 a.hundred airgun slugs....lol. The fatal flaw casting is having.to size your slugs...Its a slow handle each slug process...... There is a.new.Lee APP press with feed tubes ,,its way faster,,, but I'm sure at a min$165.00 to $300.00 tricked out to work good ... Lee sizeing bushings will be here tomorrow in .221 and .222 diameter.. I'm ready to test my 22 condor= Chaszel 12 twist barrel liner... $68.00 😀
    R
    I just wanted to thank all the members on the forums that supported me the last 3years.. My health has been bad..No income..My disability finally went through😀... My best friend realized the hard times I fell on and bought me my .510 Texan and .22 Condor... Airgun s and there related activities really helped at times when I was unable to do anything else...I rebuild my yong heng 7 times....I couldn't afford a compressor upgrade.. I'm so looking forward. to a air compressor booster upgrade!😀.. My Tractors.fixed.. new shooting range at other property finally going to happen!!!! So thankful for your support!!! My health is much better than its been in a long time!!!! I'm going to have income play around with airgun s,food plots, and new camp.and range on our family property...Small things mean alot...Good.day friends
    R
    I'm getting my most important tools for airgun usage ready for service!!! Team Kubota L3010 and Team Honda Rancher 420TRX.....With the tractor fixed brush hog a new shooting range on the grown up property now possible😀!!! Hopefully 250 yards!! ! I'm kinda gimped so I have to have trails.cut and be able to drive to targets....I have the POP up camper on the property already!!!! Since spending more time there the wildlife are responding well...Less trespassers...... Saw good bear sign had me surprised😮😮...
    R
    IMG_20240407_152114.jpg I'm just so happy today for good weather 👍 Getting 50: yards Zero s and chronograph. Crutches are better for bench shooting.. Hopefully get brushog to other property..200 yard range coming soon 🙂 Handicap shooting rig for Texan... lol
    R
    I'm just so.thankful for the support and kindness of members from this forum. Since joining the forum I've had various health problems.. The days when I'm not good I'm the forum.. It's means A lot to me to able help someone fix there problem.. The support here has really helped me.. So hopefully god willing I might get a 250 yard airgun range done this year....Ill be able to do a little more technical shooting... 😁
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back
Home
Forums
Resources
Menu