I got my Barra 250z in on Thursday, played with it all weekend. Here are my thoughts:

It’s long, like real long. With a Buck Rail UNF Moderator it’s got a few inches on my RAW HM1000x and that’s saying something. It is pretty light despite its length and I had no issue carrying it around in the woods with me this weekend. Just need to be a bit more
mindful.

I’m not too picky in furniture, the stock does look kinda “cheap” that said it’s got side and bottom slots for M-Lok accessories and it’s plenty sturdy. I shoot off a tripod and it handles like a PRS style powder burner.

I like the bolt much more than I thought I would. Pretty smooth, and will get better with time. The trigger however leaves a LOT to be desired. It is adjustable, but at least on my rifle, just when it starts to be palatable the crossbar style safety stops working. More to follow on this, if i have to grind the cross bar a bit to get it to work I will.

Barrel shroud air tank is a game changer. I like it enough that an FX DRS will likely be my next rifle.

Its fast. Mine is in .22, and anything in the 15-18 grain pellet range is hovering in the 990-1000fps. This seems to be fine at 30 yards but stretching it to 50 the dispersion starts to show up, you can tell they’re moving just a little too fast. Conversely 23 grain .217 Nielsen slugs are pretty good coming in around 850fps, but again they’re not moving quite fast enough to really hold a decent group at 50. I have a feeling pellets and slugs in the 20-24 grain range will let me leave it stock and get good results. Otherwise I’d have to go up for slugs and down for pellets, which I may very well do. The external reg adjustment and degas screws are clutch.

For $450 bucks I think this thing is awesome. If you get one let me know what you think!
 
Got mine last week, $440 from Barra. I only got to put two mags through it, neighbors were out next door to my shop and the 250z is as loud as it is long! Will try a couple different moderators on it to quiet it down. Got it sighted within a few shots and it grouped real good with .22 JSB 25.39gr. I just bought a bunch of different pellets to try, curious if any will be better than the 25 gr. Trigger is spongy feeling, not terrible though imo, will probably try to adjust. Bolt cycles nice, magazines are nice too, stock is decent for what it is, doesn’t feel cheap or flimsy, it has a dense feel to it. Cylinder over barrel is very cool, I like the design. Can’t wait to spend some real time with it and put some lead through it.
Also got a few extra mags from CARM, I think they are 13 shot in .22.
 
I got my Barra 250z in on Thursday, played with it all weekend. Here are my thoughts:

It’s long, like real long. With a Buck Rail UNF Moderator it’s got a few inches on my RAW HM1000x and that’s saying something. It is pretty light despite its length and I had no issue carrying it around in the woods with me this weekend. Just need to be a bit more
mindful.

I’m not too picky in furniture, the stock does look kinda “cheap” that said it’s got side and bottom slots for M-Lok accessories and it’s plenty sturdy. I shoot off a tripod and it handles like a PRS style powder burner.

I like the bolt much more than I thought I would. Pretty smooth, and will get better with time. The trigger however leaves a LOT to be desired. It is adjustable, but at least on my rifle, just when it starts to be palatable the crossbar style safety stops working. More to follow on this, if i have to grind the cross bar a bit to get it to work I will.

Barrel shroud air tank is a game changer. I like it enough that an FX DRS will likely be my next rifle.

Its fast. Mine is in .22, and anything in the 15-18 grain pellet range is hovering in the 990-1000fps. This seems to be fine at 30 yards but stretching it to 50 the dispersion starts to show up, you can tell they’re moving just a little too fast. Conversely 23 grain .217 Nielsen slugs are pretty good coming in around 850fps, but again they’re not moving quite fast enough to really hold a decent group at 50. I have a feeling pellets and slugs in the 20-24 grain range will let me leave it stock and get good results. Otherwise I’d have to go up for slugs and down for pellets, which I may very well do. The external reg adjustment and degas screws are clutch.

For $450 bucks I think this thing is awesome. If you get one let me know what you think!
So true. The Marauder comes standard with a "Lawyer spring" and the Barra 250z comes standard with a "Lawyer safety."

Be careful about posting any advice on how you get your firing mechanism to work. A former active member got sued (Southern Gunner) by someone for misusing the information he put out. Although, I think, that was about a different thing, pressure, same rule applies. People are always looking to blame somebody else when they screw up.
 
I work in insurance. You have no idea how bad it can get, and how angry people can get when theyre forced to cover their own foulups.

Some actually assume insurance is a literal "mistakes never cost me a dollar", accountability shield.
 
So true. The Marauder comes standard with a "Lawyer spring" and the Barra 250z comes standard with a "Lawyer safety."

Be careful about posting any advice on how you get your firing mechanism to work. A former active member got sued (Southern Gunner) by someone for misusing the information he put out. Although, I think, that was about a different thing, pressure, same rule applies. People are always looking to blame somebody else when they screw up.
Not gonna lie, that’s hadn’t occurred to me. Solid advice, and I certainly won’t give out any. I don’t need any of that in my life lol
 
  • Like
Reactions: PumaCarl
So true. The Marauder comes standard with a "Lawyer spring" and the Barra 250z comes standard with a "Lawyer safety."

Be careful about posting any advice on how you get your firing mechanism to work. A former active member got sued (Southern Gunner) by someone for misusing the information he put out. Although, I think, that was about a different thing, pressure, same rule applies. People are always looking to blame somebody else when they screw up.
It's such an inconsistent thing, the law and how certain thresholds are so vastly inconsistent in gauge. Brandenburg vs. Ohio. "It's not a crime to wish someone dead in detail and state you'd like to do it based off of prejudices, but he didn't specifically implore anyone to do it, someone took it upon themselves".

Any case regarding self sufficiency or weapons
"And you demonstrated in your video clearly, how to load a magazine and insert and chamber the weapon, thus, providing the information necessary for the mass shooter to complete his dastardly plan, we hearby award an NGO who wasn't directly effected everything you've ever owned or will have owned or earned, may God cast you into eternal flame"
 
Not gonna lie, that’s hadn’t occurred to me. Solid advice, and I certainly won’t give out any. I don’t need any of that in my life lol
It really does suck to have to worry about it. I remember how mad I was that Southern Gunner wouldn't say how he got his G1 to shoot so well, and then I finally heard about the lawsuit, and started figuring things out the hard way.
 
It really does suck to have to worry about it. I remember how mad I was that Southern Gunner wouldn't say how he got his G1 to shoot so well, and then I finally heard about the lawsuit, and started figuring things out the hard way.
While I’d certainly hope any judge would look at that suit and throw it out immediately, what a hassle to have to deal with. Being able to mod and tinker is half the reason I got into this hobby. Couldn’t imagine going after an anonymous forum user because I hurt myself lol.
 
While I’d certainly hope any judge would look at that suit and throw it out immediately, what a hassle to have to deal with. Being able to mod and tinker is half the reason I got into this hobby. Couldn’t imagine going after an anonymous forum user because I hurt myself lol.
You're a recent member, and I don't know if you have used the private message function before, so check your pm inbox. Just click your screen name up top.

EDIT: Be sure to go back to the pm thread, I added to it.
 
Last edited: