It's okay. I myself was just unchained from the "Sloth" chair.Ahhhhh, now I get it! Pistol Marauder! Thanks!
I may be slow, but I get there!![]()
Is this one of those PCP conversion kits you can get from fleabay or amazon? Do you have a link? Neat looking setup man. Some suggest adding a bottle. I always like a pistol to be slim and trim that's easy to point and hold on target. Really like the way yours looks right now.Not much of a pistol guy, unless they're converted to carbine lol.
I had a bunch of parts laying around and decided to come up with this.
Pcp, running 550 fps on a 2000 psi fill and current spring. Have some better springs coming for it, hopefully break into the 600s with this 10" barrel. I've seen north of 20 fpe with this barrel, so shouldn't be too hard to achieve my goals.
Getting plenty of shots off the 100cc tube, and pretty quiet thanks to the shortened Prod shroud and air stripper. No baffles needed for now.
Trigger could be better since it's a single stage, but it's as light as I can get it. Maybe put a Prod trigger group on it some day if it proves worthy.
Drilled and tapped the breech for the metal iron sights I stole of a gun I can't even remember, as well as the front sight tapped to the shroud.
So far I'm holding quarter sized groups at 20 feet, so hopefully I will achieve my goal of squirrel hunting soon.
Maybe a nice set of zebrawood target grips to finish off? Need to repaint the grip frame too.
View attachment 518767View attachment 518768View attachment 518769View attachment 518770
Looks like 600 to me….All I wanted was 600, just 600, and it wouldn't give it to me.
View attachment 518804
cloes enough right?
Yep I used one of these and might buy a couple more for carbine and pistol builds I have in mind.Is this one of those PCP conversion kits you can get from fleabay or amazon? Do you have a link? Neat looking setup man. Some suggest adding a bottle. I always like a pistol to be slim and trim that's easy to point and hold on target. Really like the way yours looks right now.
Thx
Ray
Definitely going to try this with a 220cc 310bar bottle and inline reg. M18x1.5 makes that very easy.Yep I used one of these and might buy a couple more for carbine and pistol builds I have in mind.
![]()
12g CO2 /Pump to PCP Conversion KIT HPA for Crosman Pistol 1377 2240 1322 2250 | eBay
Specification: Can install M18x1.5mm air tank. Suit CROSMAN 2240 2250 2260 1377 1322 2300 and so on. DO NOT disassemble the installed part when you get them.www.ebay.com
I had an m18x1.5 bottle on mine for a bit.Definitely going to try this with a 220cc 310bar bottle and inline reg. M18x1.5 makes that very easy.
I like it!Not much of a pistol guy, unless they're converted to carbine lol.
I had a bunch of parts laying around and decided to come up with this.
Pcp, running 550 fps on a 2000 psi fill and current spring. Have some better springs coming for it, hopefully break into the 600s with this 10" barrel. I've seen north of 20 fpe with this barrel, so shouldn't be too hard to achieve my goals.
Getting plenty of shots off the 100cc tube, and pretty quiet thanks to the shortened Prod shroud and air stripper. No baffles needed for now.
Trigger could be better since it's a single stage, but it's as light as I can get it. Maybe put a Prod trigger group on it some day if it proves worthy.
Drilled and tapped the breech for the metal iron sights I stole of a gun I can't even remember, as well as the front sight tapped to the shroud.
So far I'm holding quarter sized groups at 20 feet, so hopefully I will achieve my goal of squirrel hunting soon.
Maybe a nice set of zebrawood target grips to finish off? Need to repaint the grip frame too.
View attachment 518767View attachment 518768View attachment 518769View attachment 518770
I appreciate it so much man! I will dedicate all the fallen sparrows in your name!Nice shooting, I am glad it is working out for you!