And you can buy any of our models without a bottle to save you a bit of dough
. Also a perk of the compact is the introduction Of a standardized bottle valve. Yes, your FX bottles will screw right onto an epoch and work!!Upvote 0
Skout Airguns Epoch Compact
- Thread starter Skout-airguns
- Start date
. Also a perk of the compact is the introduction Of a standardized bottle valve. Yes, your FX bottles will screw right onto an epoch and work!!
. Will they come in different colors?
I'm not completely up to speed on the bottom facing Regulator knobs ?
* Can we see a picture looking from the bottom of this compact feature please.
Is this more compact design in NOT HAVING the knurled knobs hanging out RETROFIT ABLE to the original EPOCH ?
* Can we see a picture looking from the bottom of this compact feature please.
Is this more compact design in NOT HAVING the knurled knobs hanging out RETROFIT ABLE to the original EPOCH ?
Upvote 0
Hi @Motorhead
I only have one of the caps on my Epoch, but i think it will give you the image you seek
I only have one of the caps on my Epoch, but i think it will give you the image you seek
Upvote 0
In the time sense last post ... took a look at originals ... and HUH ?
Over to Lathe & Done
* Always was a Gripe I had that the knobs were not really rotatable while under pressure with your fingers ... and them hanging down being uncomfortable and in the way shooting offhand. Now permanently cured
Over to Lathe & Done
* Always was a Gripe I had that the knobs were not really rotatable while under pressure with your fingers ... and them hanging down being uncomfortable and in the way shooting offhand. Now permanently cured
Last edited:
Upvote 0
I took carpentry shop in high school.
I *should* have taken machine shop...
The hell was I thinking back then??
I *should* have taken machine shop...
The hell was I thinking back then??
Upvote 0
Get yourself a little lathe. You can still learn.
I took a lot of shop classes in the 10th, 11th, 12th grade
Metal I & II, Drafting I & II, Electronics I & II, Auto I, Wood I. Glad I did.
And then I took a bunch more in college.
I took a lot of shop classes in the 10th, 11th, 12th grade
Metal I & II, Drafting I & II, Electronics I & II, Auto I, Wood I. Glad I did.
And then I took a bunch more in college.
Upvote 0
Will there be a small arca or Pic rail to attach to? I could really see myself getting one of these
Upvote 0
FX=Call your local dealer
Daystate=Call your local dealer
Karma/AEA=Good Luck
Taipan=Go fish
Skout=We will have the owner contact you.
1 here is NOT like the others.
Daystate=Call your local dealer
Karma/AEA=Good Luck
Taipan=Go fish
Skout=We will have the owner contact you.
1 here is NOT like the others.
Upvote 0
On the Epoch Compact we recommend either an over bore bipod or a bottle clamp!
On the .22 cal shooting JTS 22.07 around 975 fps we are getting around 30 shots from a full fill
Upvote 0
