Tuning V I D E O / Turkish Tomahawk re barreled , gas rammed the works !

What’s wrong with the other barrels.. are they SNUG. ? Tight chokes. ? I would like to rebarrel one of my guns and need. Snug choked .20 cal.
The .20 LW barrel have minimum pellet to bore contact / not sure on the chokes I would have to see, its been a while since I looked at them are you wanting one with a choke I can check for you
 
My Tomahawk will shoot dime size groups with JSB 18 gr pellets at 32 yds, its a squirrel killing machine. John in PA did a tune on mine in turn I gave him a extra .22 Tomahawk I bought when they clearanced them out, got luck and got 2 with super nice wood.
Gas ram would be pretty neat on one.
Hi Dean
yes its either good or not so good the luck of the drawl, did John make a custom spring guide for it ?

Septicdeath above was the one I did with the O ring piston cap that turned out fabulous my elevation was I was getting 820 830 fps just outstanding/ great to here from you 👍
 
Hi Dean
yes its either good or not so good the luck of the drawl, did John make a custom spring guide for it ?

Septicdeath above was the one I did with the O ring piston cap that turned out fabulous my elevation was I was getting 820 830 fps just outstanding/ great to here from you 👍
Good to see you on the forums. Mike To tell the truth I didnt even ask what he did, it shoots hard and with a solid thump..it buzzed like crazy before he messed with it..love the way these guns point and feel in your hand. It shoots JSB pellets with a SD of 3 fps or less.. Kodiak HP 18.1 gr with 4 fps SD. Quiet a few others under 6 fps SD. Mine is shooting around 17ft lb.
 
Good to see you on the forums. Mike To tell the truth I didnt even ask what he did, it shoots hard and with a solid thump..it buzzed like crazy before he messed with it..love the way these guns point and feel in your hand. It shoots JSB pellets with a SD of 3 fps or less.. Kodiak HP 18.1 gr with 4 fps SD. Quiet a few others under 6 fps SD. Mine is shooting around 17ft lb.
The Dime size groups at 32 yds is phenomenal, I mean WOW you could not ask for more/
I have Webley .22 Vulcan barrel just got from mike Baker if its a good pellet to bore fit Iam going to re do the last tomahawk I have first Ill check the air chamber
 
They are garbage then.. was gonna do a Longbow ..
but if stock from Lothar Walther has been bad, I might use a HW ,OR WAIT …
those barrel I bought off ebay from Dennis Quackenbush , I never checked them they sat for couple of years

if you order from loather Walther just ask them to check the pellet to bore I don't bother getting choked because most of the time they are way over choked / I choke my own
 
They are garbage then.. was gonna do a Longbow ..
but if stock from Lothar Walther has been bad, I might use a HW ,OR WAIT …
I have a .22 webly vulcan barrel I would need to clean the bore first then check the pellet to bore fit would that work for your long bow? if so I'll check the bore for you
 
  • Like
Reactions: Septicdeath
Hi Dean
yes its either good or not so good the luck of the drawl, did John make a custom spring guide for it ?

Septicdeath above was the one I did with the O ring piston cap that turned out fabulous my elevation was I was getting 820 830 fps just outstanding/ great to here from you 👍
It shoots at around 837 fps average. Sweet cocking cycle. And very accurate