I've had this Marauder pistol for around 7 years. It started leaking about a year ago. Just ignored it. It would lose most pressure overnight.

Finally diagnosed it with soapy water--leaking from where the pressure gauge screws into the reservoir tube. I have tried 4 ways to seal it--no luck:

-Re-install with yellow gas tape on the gauge threads.
-Re-install with blue loctite on the threads.
-Re-install with both yellow plumbers (gas) tape and blue loctite on the threads.
-Put an o-ring at the base of the pressure gauge.

The leak remains in the same place--right side of the threaded port that the guage screws into, when shouldered and looking down the barrel.

Any suggestions on a way to seal this leak? Should I try a caulk product, or a marine sealant like 5200 or 4000?

It really hurts to be selling all of these spectacular rifles. This one is an immaculate and deadly accurate .25 Brocock Sniper XR Magnum Cerekote, I purchased new from AOA. I will include the Donny FL Sumo moderator painted to match as shown. I only have one factory magazine for it.

As you can see via the attached chart, I was able to achieve, with hand sorted for size and weight JSB King Heavy MK1 33.95 gr pellets, a two 10 shot group average at 84.1 yards of only 1.12" in light wind conditions.

I have attached the initial 18 yard set-up sheet where I did test the 33.95 gr pellets, the 25.4 gr pellets, and the Zan 30.5 gr slugs. It will shoot all of these very well.

In the end, I settled on the Air Arms Diablo Field Heavy 25.4 gr pellets, as I really liked how flat and accurately it shot them.

The rifle sells for $1995 at AOA without the moderator. Price reduced to $1,375 shipped, with the moderator.

For the Hawke Sidewinder ED 8-40x56 30 SF IR SFP scope and mounts, add $550 (can see a fly on the target at 100 yards).

For the Accu-Tac bipod as shown, add $250.

Will ship within the continental US only. PayPal F&F or add 3%. Will ship in the original factory box.

Thanks for looking....DZ

Converted to HPA with a safepac. Has a 21" barrel and set up currently for 20 shots at 500-550-500 fps on a 2500 psi fill. Great starting point for a budget tinker toy. Will come with the co2 parts so you could easily convert back to 12 gram carts. Has 2 screw mod done to trigger and lightweight spring.

$140 FIRM paypal or cash app
CONUS only

Rebuilding my R9 and the screw that holds the receiver to barrel block. Why do they use flat heads? Stripped the slot doesn’t look to good. Ordered and received 2brand new ones.

Rifle, 2 mag cylinders, 3 tins of pellets, varmint scope and bottle clamp. Any questions feel frree to message. Motivated, send me an offer.

With the Memorial day holiday upon us, I would like to respectfully request that everyone take a moment and remember those who fell in defense of our nation and freedoms and right in far away lands throughout the history of our great nation.
I personally have lost brothers, comrades and friends while in the service of our nation.

Thank you for your understanding.

Dear forum, i am new on this forum but also new on the air rifle scene. Currently i have become a member of a shooting club and shooting with small kaliber and air rifle 4.5. I am interested in buying a pcp air rifle but am hesitating which one to choose due to my inexperience. What i am looking for is a pcp airrifle that can shoot appr 75-100mtr, is multiple shots and can be pumped with a handpump. Does anyone have a suggestion? I was looking at Air Ventura en Gamo. Also at Bullpups. Thanks in advance for your advices.

Its time I get on the slug band wagon! I've always been pellet guy, just love them. But seeing the accuracy potential I have got to try it. Being a Prototype shop owner I tend to make what ever I can so I'm happy with the quality of it. I'm starting with an RCBS Rebel press and making the modifications to convert it to a swaging press. And its made in the USA!
First thing is to modify the leverage ratio by moving the two pivot pins on the lever knuckle closer. This press is heavy duty and can easily handle swaging. Then I slot the Ram shaft so it will have a place for the ejector pin to bottom out against. Then thread the end for a die to connect too and bore the ejector pin hole in the end. Next up I'll make the dies!

FX dreamline compact. Odyn stock. 300 cc bottle. Original air tube included as well. Bought off another forum member a couple of weeks ago. Great little shooter but I had to try an epic 2 compact. So this one needs to go. No trades.

Original box/paperwork
1 mag
Original air tube
(Moderator not included)

.20 TM1000 CF pistol @ 20fpe converted to a carbine or a micro hunter for small game?

Seems like the Micro Hunter is more suitable but no .20 and shot count/fps seem lower in .22 25.

I just received the rws 34 refurb in 22 yesterday and it already seems to be grouping very well. The condition looks brand new and trigger feels great. After a gd look over I thought to myself it reminds of my 10/22 ....it sure isn't perfect but does everything decent .

They bite. Snapped down on my thumb today and got me where my nail attaches at the side. Took a chunk out of my nail and dug in there deep. Needless to say it's in the trash.

Greetings from Idaho. I haven't posted for a while.

I have been tunning my .22 Crown II and can't get past 900 fps with Barracuda Match. I would like to shoot 25 gr pellets at 950. I have been thinking of rotating the barrel 180 degrees to bring the slug transfer port in line with the valve. Has anyone tried this?

Slugs are tempting, but I need to shoot pellets because of the rules at EBR.

Ron

Hi is there anybody out there that could possibly help me out with understanding why when I start filling my gun air leaks out the barrel? And Ive done it while I have it cocked as well.

when I have the lever back air shoots out the mag well side as well as the front of barrel.

O rings seem to be all in I did have a problem with my valve pin but I epoxyd and taped my valve pin back together and it seems to be working as it sould I just can't get a fill.

When I turn my power adjuster down (jts airicuda standard) the air seems to move slower thru the barrel. It's almost like the air is just passing right thru the gun how can that be? Anyone?

As a air gunner I have a deep appreciation of all things mechanical and DIY, I have started a new journey in wanting to get into blacksmithing an all that surrounds it like welding, carpentry and metal work. Was a welder for many years and did metal work and some blacksmithing before
The danger of looking at a YouTube video is in being sucked into more videos until it is past bed time. So here is a really cool video of an amazing collection of hundreds of anvils and vises and other smithing tools. These are European items of various ages and sizes, but in vast numbers not to be seen in one place elsewhere. And the fort is cool, with amazing views of the surroundings. The stuff is crammed into the largest 16th century fortress in Italy and the construction work in progress indicates the owner has not run out of money yet. please enjoy!

Looks like Arken is offering a bigger discount than normal over Memorial Day


I own two, good excuse to buy another

How can we make it easier to hold a Field Target match?

As always there are threads about changing the game, which would inevitably add cost, and time for those of us who host events.

So I ask, from shooters and match directs, how do we make holding matches easier for match directors?

I will start: Come early/stay late to help.

Hello everyone! I recently acquired a jsar raptor in .25 it stacks pellet in pellet at 50 yards and the 100 yard group isn't bad either bit I was wondering if anyone had suggestions on getting a tighter group.
The attached photo is about 15 or so shots with fx 34 grain pellets,all shots where taken laying on the ground with the rifle resting in a bag as well as the stock being support by a bag aswell

Question, has anyone tried feeding the intake on a yong heng off shop air? I have a pretty good drying filtration system on my 220v shop compressor for painting applications, and I wonder if feeding it with 100-140 psi air would speed fills and/or aid air drying. Pre-Chinese compressor…or maybe the extra density would just cause problems with the design… just curious if this has already been done.

New to the forum and just getting back into airguns. I got a few guns and am looking to rehome one or two to get myself back into the hobby. Any advice/info on anything I should know being new to the forum would be great.
I'm in Linn county Oregon

***Moderator edit: please read the rules for CLASSIFIED SECTION. Specific guns have been removed to allow the post to stay.****

Custom double plenum carbon fiber RTI P3 in .25....

Sidewinder Compact .25 SS edition with upgraded 580 TT bottle and Altaros moderator..








DRS In Stock Now...

FX Crown 600mm, 30 caliber in Forest Green Laminate stock with adjustable cheek and butt. Includes the smooth twistX, Superior, and slug liners, 2 magazines, single loader, owners manual, spare o-rings, the original hard case, and a 6-24x50 scope (not shown). ALL in like-new condition.

$1000 shipped insured conus.
PayPal FF or + 4%, bank & postal checks ok.

Hey all,
Looking to upgrade out of my pump guns to something more substantial to dispatch the waves of hellacious starlings infesting my structures.

Happened upon the JTS AiracudaMax and feel like it's probably the best I can get for the money. My original budget was somewhere around $700 and I really liked the thought of the BSA R10 but they seem to be impossible to get in the states.

Am I on the money thinking of this JTS rifle?

Click Order my Rx Targets!Save 20 percent site wide Friday through Monday with code MEMORIAL20. While supplies last. International customers email me at [email protected] to arrange orders. Thank you and have a safe weekend as we remember the heroes who have made the ultimate sacrifice in service to our country.

WTS/WTT Benjamin Bulldog 357cal. I recently picked this up and found out that it's not for me, as I prefer shorter and lighter guns. My loss your gain. Selling with or without the scope. The Bulldog comes with a Discovery 3-12×44-30mm tube, FFP scope, 4-5 shot magazine's. Plus ammo 2 tins of 81gr and about 90 High Arc 160gr slugs and a DonnyFL Ronin. I'm asking $550 with scope and without the scope I'm asking $450 Plus 1/2 shipping. Buy with confidence as I have about 10 pages on the old Yellow BOI and only a few here. Payment forums USPMO and pay pal. I would prefer communicating by texting,so text me at 92zero 4two79six08.
Thanks for looking Richard