LCS Air Arms SK-20 Automatic .25 Air Rifle​

1 of 5 made SPECIALLY made by LCS for the EBR speed event.

This is a 20 shot SK-19 in .25 Cal. All others have a 19 shot capacity.

Dual Bottle system and comes with TWO extra barrels and hard case.

Super fun to shoot and VERY accurate.

Fitted with Hawk Sidewinder ED 10x50x60
and Eagle Vision INS 30 adjustable scope rings.

Over $4000 invested.

Selling all for $2000 for complete package that includes Scope, Scope rings, 2 extra .25 cal barrels.

Will sell rifle separately if interested. Make an offer.

Details..
The SK-19 air rifle from LCS Air Arms represents a new generation in a semi-auto hammer-less design. Made in the USA! The tactical design and select-fire function allows for semi-auto or full-auto rate of fire. The SK-19 provides an incredible rate of fire and high power in either 22 or 25 caliber. The LCS SK-19 magazine provides 19 shots and will chamber the longest of available pellets or slugs. Accuracy is provided by a Lother-Walther barrel and a highly tunable regulated action. The regulator is adjustable from a small easy-to-access knob just in front of the air fill. A power wheel at the back of the action gives the shooter further command of the air delivery mechanism. The rifle sports two safeties, a picatinny scope rail and bipod rail. The barrel is covered with a carbon fiber style shroud and silencer for low muzzle report. The LCS SK-19 comes standard with a 480cc removable carbon bottle and two pressure gauges for vital air supply and regulator pressure information. In full-auto fire the rifle will run through the 19 shot magazine in under 3 seconds. The SK-19 is a leap forward in airgunning fun and performance.

Includes hard case with securing straps and room for your favorite scope.

Notos
14.35gn @ 757fps (18fpe)

October and it's still over 100 degrees and not much moving so on a slow day I entertain myself with some slow motion vids

Used Tactacam 5.0 scope cam @ 240fps and the Akaso Brave8 @ 480fps at the target

Many of my PCPs started leaking after 2-3 years, usually after the warranty ended.

The amount of time I spent trying to fix leaks by replacing o'rings is huge.
Sometimes I succeeded fixing the leaks, other times I decided I had enough and sold the PCPs.

PCPs (at this time) are the least robust of air guns, mostly because they need to hold air much longer (and at much higher pressure) than a springer, multipump or CO2 air gun.

They also are the most powerful and most accurate at longer range, and even short range

When I shoot PCPs I love them!
When I fix their leaks I hate them!

If the PCP leaks continue I will soon spend more time with my slingshots or bows, both can be fixed in 5 minutes or thrown away if something breaks.

So, what am I to do?

Anyone with a leaking PCP start complaining

Hate to sell her, but up for grabs is my old faithful .22 cal, super accurate and regulated, FX Royale 400. It's one that I will regret selling.

My buddy Van custom painted the stock for me so it's one of a kind.

Currently fitted with a Hawke Airmax 30 8-32x50, adjustable rings and Huggett moderator. Comes with 2 magazines.

Selling as package with scope and rings or rifle only.

Package deal for $1200 with free shipping or
$1000 for rifle only. Shipping not included.

Call or text
6O2-43O-O737

10 shots at 25 yards pictures below with shot details.

Anyone have issues with their side focus being really hard to turn? I mean like really really hard to turn to the point that your finger hurts just by gripping it and turning it. I have a center point with side focus is really hard to turn. I work it back and forth and it got a tiny easier but still hard. Then I purchased a new scope westhunter compact scope 3x12 44ao. This one is twice as hard as the Centerpoint. I grip it as hard as I can and force it to turn, it wouldn't even budge. My fingers hurt to the point i couldnt do it anymore. I have to get a cloth and grip it and turn so it wouldnt hurt. It barely turns. I work it back and forth and it is now a little easier to turn by hand. But still have to grip it and turn really hard just for it to move. Shouldn't the side focus be easier rotate? Why is it so hard? Is there ways to make it easier to turn.

I've started making Air Rifle Totes in my hobby shop (I'm retired). I buy kiln dried rough lumber from local sawmill and mill it myself.

Features:

• Streamlined
• 22-24x9x9 inches
• 6.68 Pounds
• About any native hardwood.
• Dowel and glue joinery (you can see pair of dowels on each end of the sides below.
• Oil Finish
• Holding channels for rifle and for shooting sticks.
  • Forend is 60MM wide
• All stock supports are padded with high-grade leather
• I attach 1/2" braided climbers rope for carrying handles

$115 + shipping of $15.

This one is Walnut and White Ash (I can make; Walnut, Ash, Ambrosia Maple, Easter Red Cedar, & Cherry).

Does anyone know of a source for practice paper targets with all the kill zone sizes?

Gents, I traded notes with Tony McDaniel this week and was happy to learn the Hickory show is still on for Friday November 1, and Saturday November 2. This is in spite of the violent flood damage to western North Carolina and east Tennessee from hurricane Helene, which is almost beyond belief.

Hickory is on Interstate 40, located east of the worst stuff, BUT I-40 and I-26 are closed west of Asheville NC and won't be back anytime soon, with sections heavily damaged and bridges destroyed. And the NC Dept of Transportation simply says to consider all smaller roads in that part of NC closed.

So if you plan to come, definitely keep an eye on usable routes! (From Knoxville TN, for example, I will likely loop north via I-81 and I-77, then hit I-40 east of Hickory.)

Just got my replacement compressor - a Yong Heng for a Yong Heng. As much as I would love to have a GX, I love having groceries and electricity more.

So I got the new compressor, I got an inline water/oil separator, I'm good.... but also scared a bit.

Is there a specific way to test a compressor, like perhaps a dummy tip that goes on the end of the hose to raise the pressure up? Before I start hooking up precious items to this thing, I want to make sure it's safe.

Taipan Vet Tactical 2 in 5.5mm
Origenal condition as from factory.

Incl are:
2 origenal mags, single load tray and hammer adjusting pins.

Very very accurate with slugs en pellets.

$965 Shiped

Text: 806 566 7190

Does BC change based on speed of bullet or is it constant regardless of speed?

i have a sidewinder compact 25cal I'd like to trade for a fx king ... let me know if you're interested and I'll send pics

I was looking some over to read and thought interesting a cometa Orion pcp bullpup was use in chapter



Anyway just thought fun to share

Does anyone know the size and thread type of the adjustment screw in the AMP regulator? I’d like to polish the mating portion of the screw to reduce any creep. I’m trying to make a jig that the adjustment screw would go into ( kinda like a bolt and screw) that would allow me to polish the head better.
Anyone know the screw size and thread type.?

Has anyone done busy with Lethal air? I am looking to send my rifle to them and wondering everyones experience with them if they have had any. I searched and saw some bad post concerning them but that was years ago!!

A new twist on conventional NRL target kits.....


NEW! Limited numbers available now from just $299 shipped.
More features, lower price.

Everything from 1/4" laser cut zinc plated AR500 steel
MUCH more versatile than conventional kits
Easily move stages with optional leg kits

I'm looking to buy a Panthera 700mm .25 for about $1500. Text Doug (540)239-5197

am I the only one who puts a hard wax on the foam in my tins and about 1/2 full of pellets and roll around a bit to coat
I don't have any proof of improvement, but I don't remember when I last cleaned my barrels

I am NOT talking lemon Pledge or the BeesWax brand of spray,,, as I use Trewax or Collinite 476s

just curious,,, not saying ya need to do it,,, it is just my lazy way to wax the gun barrel
and it seems to be a good way to protect the barrel's interior

A NIB Red/Blue Laminate 22 Avenger. Rifle has never been out of the plastic bag. New they list for $449.00 at Baker Airguns. It will also come with the Blackarts Design Air Venturi package which is $85.00 https://blackartsdesign.com/product/air-venturi-avenger-package-barrel-band-system-donnyfl-adapter/

The rifle and Venturi package is $375.00 shipped. PayPal F&F or you can pay the fees. No trades.

Tony P.

This gun was part of the first batch that RTI sent to the US. Purchased it new from Alamo Airguns. Loves JSB 18gs and at 100m and will do MOA. Reg works fine but sometimes you need to fire a few shots to get it going which isn't unique to the RTI Reg. Has a scratch on the barrel shroud( pictured) and some where where the cocking lever is but other then that it is in very good condition. No issues with the valve poppet like the Mk2s. Includes Leapers UTG 10x40 Mil dot scope, 1 mag, RTI case and paperwork. $925 shipped CONUS PP or USPS MO.

Early Theoben Rapid Mk1/12 Carbine in .25. Had this resealed by Martin at RAW a few years back and its still holding air and shooting well. It maxes out at around 36-38 fpe as the valving isn't as opened up as the later models. Likes JSB Hades and Benjamin Domes. Overall very good condition. The buttpad is original and has some wear, the action is in very good condition and the barrel bluing is great as well. Comes with single shot tra, one magazine and Bushnell 6-18x40 Duplex scope. Email for more pics. $800 shipped CONUS PP or USPS MO.

I need a modest power .177 pellet pistol or small rifle. I prefer to avoid PCP options but, could work with one if I really need to. I need enough power to kill small predators without damaging surrounding things, I will be shooting at modest distances, under 20' a lot of the time, and rarely if ever beyond 50'.

Things seem to be a lot more expensive generally than the last time I was in the market. I want a quality air pistol or rifle but, cheaper is better! I am unsure what I need to spend but, an >$1500 FWB, Steyr, ... pistol ain't going to happen.

The other thought I had was possibly getting a bullpup rifle at the 6FPE power level. I don't have access to high-pressure compressed air where I live so, that is a consideration too.

TIA,
Sid

Case, Moderator,gun all forsale. barely been shot like new please txt,email,call 512-538-9three78. I live in Leander,tx local sale please $1500

Hey everyone,

Long time lurker here but first post, just registered for this one (I enjoy reading all the great stuff going on here and all the hacks being discussed but prefer to keep my silence unless I encounter something I really can’t figure out…).

Finally gave in and got a notos a couple of weeks ago, having tons of fun with it! Didn’t do anything to it yet other than trigger. Started to take it out a bit further these days to 50 yards and noticed that the POI is shifting notably between sessions. Took it back to 30 yards to confirm (with paying more attention to the shift) and it indeed does!

I have a westhunter FFP on it and grouping is very nice at 30 yards, quarter size with jts 18.1 as well as hades. POI is holding while shooting, doing 15ish shots until topping off. POI holding between fills. But when I put the gun aside for a day or even a couple of hours, POI shifts. Half an inch or maybe a bit more at 30 yards, new zero typically needs 0.5-0.8 mil up and 0.2-0.3 mil to the left or opposite, basically bouncing back and forth between those POIs (no change of conditions). Groups remain nice and tight, just in a different spot… It’s the same with both single shot tray and mag (maple mag). All screws are tight. Any ideas? Thank y’all in advance!

What's the lowest FPS you've ever used while clearing out pests or hunting? What distance? Pellet weight? What was your quarry?